2021 MERCEDES-BENZ V-CLASS reset

&
W
WARNI NG
ARNI NGRisk of becoming trapped even
with there ve rsing feature active
In particular, there ve rsing function will not
re act:
R tosoT, light and thin objects, e.g. /n gers
R overth e last 4 mm of the closing path
R during resetting
R when you close the sliding sunroof again
manually immediately aTer automatic
re ve rsing #
During the closing process, make sure
th at no body parts are in the closing
area. #
Release the button immediately if some-
body becomes trapped.
or #
Press the button in any direction during
th e automatic closing process.
The closing process will be stopped. Opening and closing t Opening and closing t
he panor
he panorama sliding sunr
ama sliding sunr oof
oof R
R
eq
eq uir
uir ements:
ements:
R The po wer supply has been switched on. #
T
T o r
o r aise (v
aise (v ent position):
ent position): pressthe3 button. #
T
T o open:
o open: pull back the3 button. #
T
T o close and low
o close and low er
er:
:pull down the3 button. #
T
To st
o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:push or pull the
3 button be yond the point of resis tance
and release it. #
T
To st
o st op aut
op aut omatic oper
omatic oper ation:
ation:push or pull the
3 button be yond the point of resis tance
and release it. Yo
u will still be able tooperate the sliding sunroof
if yo u switch o. theve hicle or remo vethekey. This
function will remain available for 30 seconds or
until you open a front door.
When the po wer supply is switched o., the sliding
sunroof will close automatically in thefo llowing sit-
uations:
R If it starts torain
R Intheev ent of extreme outside temp eratures
R ATer six hours
R Ifth ere is a malfunction in the po wer supply
The sliding sunroof will remain raised at there ar to
allow theve hicle interior tocontinue tobe ventila-
te d.
The sliding sunroof will not close in thefo llowing
situations:
R Ifth e sliding sunroof is raised at there ar.
R Ifth e sliding sunroof is obstructed.
R If it is not raining on the /eld of thera in sensor
on the windscreen because theve hicle is
underneath a bridge, forex ample.
If th e sliding sunroof closes via thera in closing
function and is obstructed in the process, it will
open again slightl y.The rain closing function will
th en be disabled. Opening and closing t
Opening and closing t
he r
he r oller sunblinds of t
oller sunblinds of t he
he
sliding sunr
sliding sunr oof
oof &
W
WARNING
ARNING Risk of becoming trapped when
th ero ller sunblind is being opened and
closed
Body parts may become trapped between the
ro ller sunblind and frame or sliding roof. #
When opening or closing, make sure that
no body parts are in thero ller sunblind's
ra nge of mo vement. #
Release the button immediately if some-
body becomes trapped.
or #
Brie0y press the button in any direction
during automatic operation.
The opening or closing process will be
stopped. 66 66
Opening and closing

R
R
ectifying pr
ectifying pr oblems wit
oblems with t
h the sliding sunr
he sliding sunr oof
oof &
W
WARNING
ARNING Risk of becoming trapped or
fata l injuries when the sliding sunroof is
closed again
If yo u close the sliding sunroof again immedi-
ately aTer it has been bloc ked or reset, the
sliding sunroof will close with increased or
maximum forc e.
There is a risk of becoming trapped or even of
fata l injuries! #
Make sure that no parts of the body are
in the closing area. #
Release the button immediately if some-
body becomes trapped.
or #
Brie0y press the button in any direction
during the automatic closing process.
The closing process will be stopped. The sliding sunr The sliding sunr
oof canno
oof cannot be closed and y
t be closed and y ou can-
ou can-
no
no t det
t det ect t
ect the cause.
he cause.
If th e sliding sunroof is obstructed during closing
and opens again slightl y:#
Immediately aTer the sliding sunroof has been
obstructed, pull the3 button down again to
th e point of resis tance until the sliding sunroof
is closed.
The sliding sunroof will be closed with
increased forc e.
If th e sliding sunroof is obstructed again and opens
again slightl y: #
Immediately aTer the sliding sunroof has been
obstructed, pull the3 button down again to
th e point of resis tance until the sliding sunroof
is closed.
The sliding sunroof will be closed without the
automatic reve rsing function. Anti-t Anti-theT
heTprev
pr ev ention
ention F
F
unction of immobiliser
unction of immobiliser The immobiliser pr
events your vehicle from being
star ted without the cor rect key.
The immobiliser is automatically activated when
th eve hicle is switched o., and deacti vated when
th eve hicle is switched on. A A
T
TA
A (Anti-
(Anti- TheT
TheT Alar
Alarm syst
m syst em)
em) F
F
unction of AT
unction of ATAA(Anti-t
(Anti-theT heTAlar
Alarm syst
m syst em)
em)
If th eATA system is primed, a visual and audible
alarm is triggered in thefo llowing situations:
R when opening a door
R when opening theve hicle with the emer gency
key
R when opening the bonnet
R when opening theta ilgate
ATer locking theve hicle with theke y,theAT A sys-
te m is automatically primed. When
theATA system is primed, indicator lamp 1
0ashes in theov erhead control panel.
ATA is automatically deactivated in thefo llowing
situations:
R ATer unlocking theve hicle with thekey.
R When theke y is inser ted into the ignition loc k.
% The ala rmis not deactivated, even if you
immediately close the open door that has trig-
ge red it, forex ample.
Pr
Pr iming/deactiv
iming/deactiv atingAT
ating ATAA(Anti-t
(Anti-theT heTAlar
Alarm syst
m syst em)
em)
Pr
Pr iming
iming #
Close all the doors. #
Lock theve hicle with thekey.
Indicator lamp 1intheove rhead control
panel 0ashes. 68
68
Opening and closing

Se
Se
tting 4-wa
tting 4-wa y lumbar support
y lumbar support 1
Higher
2 Weaker
3 Lower
4 Stronger #
Use buttons 1to4 adjust the backrest con-
to ur individually toyour spine. Oper
Oper
ating t
ating t he memor
he memor y function
y function &
W
WARNING
ARNING Risk of an accident if the mem-
ory function is used while driving
If yo u use the memory function on the driver's
side while driving, you could lose control of the
ve hicle as a result of the adjustments being
made. #
Only use the memory function on the
driver's side when theve hicle is station-
ar y. &
W
WARNI NG
ARNI NGRisk of entrapment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat,
yo u and other vehicle occupants – particular ly
ch ildren – could become trapped. #
During the adjustment process of the
memory function, make sure that no one
has any body parts in the sweep of the
seat. #
If somebody becomes trapped, immedi-
ately release the memory function posi-
tion button.
The adjustment process is stopped. &
W WARNING
ARNING Risk of entrapment if the mem-
ory function is activated bychildren
Children could become trapped if they activate
th e memory function, particular lywhen unat-
te nded. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. The memory function can be used when
theve hi-
cle is switched o..
* N
NOOTE
TE Damage tothe seat when moving
into a stored position If
th e seat is mo ved out of the fully reclined
position into a stored seat position, it can col-
lide with other vehicle parts.
This can damage the seat. #
Before moving the seat into a stored
position, mo vethe seat backrest into an
upright position. S S
t
t or
or ing seat se
ing seat se ttings
ttings
% V
Vehicles wit
ehicles wit h luxur
h luxury r
y rear seat
ear seat :
:th e memory
function is used identically tothe front seats.
Tw o memory positions are available.
Seat settings for up tothre e people can be stored
and called up using the memory function.
The following settings are stored as a single mem-
ory preset:
R the position of the seat, seat backrest and
head restraint
R additionally forth e driver's side, the position of
bo th exterior mir rors Seats and st
owage
75
75

#
Adjust the seat tothe desired position. #
Adjust theex terior mir rorto the desired posi-
tion. #
Brie0y press memory button Vandthen
press preset position button 4,Tor
U within thre e seconds.
An acoustic signal sounds. The settings are
stored. #
T
To call up:
o call up: press and hold preset position but-
to n4, TorU untilthe seat and the
ex terior mir rors are in the stored position. R
R
o
ot
tating t
ating t he fr
he front seats
ont seats &
W
WARNING
ARNING Risk of injury or fatal injuries
due tothe driver's seat and front
passenger seat not being engaged
In this situation, there straint systems cannot
pe rform their intended pr otective function. #
Engage the driver's seat‑ and front
passenger seat in the direction of tr avel
before starting the engine. *
N
NOOTE
TE Damage tothe seats due tocollision
with adjacent car parts The seats can collide with adjacent car parts
when
they are rotated.
This can damage the seats. #
When rotating the seats, make sure there
is su1cient clearance. Yo
u can rotate the driver's and front passenger
seats by50° and 180°. The seats engage bo thin
and opposite tothe direction of tr avel as well as at
50° towa rdsth eex it. #
When rotating the seat, open there specti ve
front door in order toavo id a collision with the
door trim. #
Adjust the steering wheel in such a wayth at
th ere is su1cient clearance torotate and
adjust the driver's seat (/ page 98). #
Push le ver1 inthe direction of the ar row.
The turning device will be unloc ked. #
Rotate the seat in the desired direction. #
Ifth ere is a risk of collision with the centre
console or the B‑pillar, pull le ver2 upwards
and mo vethe front seat forw ards or bac k-
wa rds into the desired position. Then release
le ve r2. #
Inthe desired position, make sure that the seat
has engaged in the direction of rotation and
th e longitudinal direction. A A
djus
djusting ar ting ar mr
mr es
eststs #
Foldthe armrest upwards more than 45° in
position 2.
The armrest will be unloc ked. #
Foldthe armrest forw ards 3asfar as it will
go. #
Slowly fold the armrest upwards into the
re qu ired position. #
T To f o f old t
old t he ar
he ar mr
mres
est upw t upw ar
ards:
ds: if necessar y,fold
th e armrest upwards more than 90° in position
1. R
R
ear seats and r
ear seats and r ear benc
ear bench seat
h seat N No
ot tes on t
es on t he r
he rear seats
ear seats
Yo ur vehicle may be equipped with thefo llowing
seats and bench seats in there ar compartment:
R Standard rear seat
R Luxury rear seat
R Comfort rear ben chseat
R Seat/bunk combination 76
76
Seats and st
owage

Comply with
the count ry-speci/c regulations for
using there ar fog lamp.
A
A djus
djusting headlam ting headlam p r
p range
ange #
Turn headlamp range adjuster 1tothe
re qu ired position. #
Ifth eve hicle is unladen, select position g.
The illumination of thero ad should be 40 m to
100 m and low beam must not dazzle oncoming
tra1c.
Yo u can use the headlamp range adjuster toadjust
th e light cone of the headlamps toyour vehicle's
load condition. The light cone will change as the
seats are occupied or the load compartment is loa-
ded or unloaded. This can cause visibility condi-
tions todeteriorate and you could dazzle oncoming
tra1c. Oper Oper
ating t
ating t he combination light switch
he combination light switch 1
High beam
2 Right turn signal light 3
Headlamp 0ashing
4 LeT turn signal light #
Use the combination switch toselect the
desired function.
Switc
Switc hing on high beam
hing on high beam #
Switch on the low beam (/ page 107). #
Push the combination switch forw ards 1.
The K indicator lamp on the inst rument
cluster will light up.
% Intheà position, the high beam switches
on only in darkness and when theve hicle is
switched on. #
T
To switc
o switc h
ho.:
o.: movethe combination switch
back toits starting position.
The K indicator lamp goes out on the
inst rument cluster.
Headlam
Headlam p
p0ashing
0ashing #
Brie0y pull the combination switch in the direc-
tion of ar row 3.
T
T ur
ur n signal light
n signal light #
T
To indicat
o indicat e:
e:push the combination switch in the
re qu ired direction 2or4 until it engages. In
th e case of lar ger steering mo vements, the
combination switch will reset itself automati-
call y. #
T
To indicat
o indicat e
ebr
br ie0y:
ie0y: tapth e combination switch
brie0y in there qu ired direction 2or4. The
cor responding turn signal lamp will 0ash three
times. Switc
Switc
hing t
hing t he hazar
he hazar d w
d war
arning light syst
ning light syst em
emon/o.
on/o. #
Press button 1. 108
108
Light and vision

#
Brie0y press but ton1.
Yo u will no longer be able tofold in the outside
mir rors once youre ach a speed greater than
47 km/h.
Eng
Eng aging t aging t he outside mirr
he outside mirr ors
ors
If an outside mir ror has been forc ibly disengaged
fo rw ards or backwards, proceed as follo ws. #
Press and hold button 1until you hear a click
fo llo we dby the mir ror audibly engaging in posi-
tion.
The mir ror housing will now be engaged and
yo u will be able toadjust the outside mir rors
as normal.
R
R ese ese tting t
tting t he outside mirr
he outside mirr ors
ors
% Ifth e battery has been disconnected or com-
ple tely dischar ged, the outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproper ly. #
Switch on the po wer supply or theve hicle. #
Brie0y press button 1.
Heating t
Heating t he outside mirr
he outside mirr ors
ors
V
V ehicles wit
ehicles wit hout a r
hout a rear windo
ear windo w heat
w heater
er:
:at temp era-
tures below 15°C, the mirror heater will automati-
cally switch on permanently once theve hicle has
been star ted.
V
V ehicles wit
ehicles wit h a r
h a rear windo
ear windo w heat
w heater
er:
:at temp era-
tures below 15°C, the mirror heater will automati-
cally switch on forte n minutes once theve hicle
has been star ted. The mir ror heater can also be
switched on toget her with there ar wind owheater. #
Switch on theve hicle. #
Press theto p or bottom section of the¤
ro ck er switch on the control panel forth e air
conditioning system.
The indicator lamp abo vethe¤ rock er
switch will light up and the mir ror heater will be
switched on toget her with there ar wind ow
heater. Using t Using t
he digit
he digit al r
al r ear
ear vie
vie w mirr
w mirr or
or The
vehicle may be /tted with a digital inside rear-
view mir ror.This uses a camera in there ar wind ow
and a displ ayinteg rated in the mir rorto prov ide a
better view tothere ar. The rearview mir ror can be
used either as a standard rearview mir ror or as a
displa y.
To prev ent glare from the digital rearview mir ror,
/r st set the digital rearview mir ror as the standard
re arview mir ror. Cer
tain types of sunlight (e.g. sun low on the hori-
zon) or light from ano ther intense light source can
re duce the display's contrast and cause it to
become too bright. In such situations, objects in
th e display may be obscured or di1cult tosee. In
th ese cases be particular lycareful and adapt your
driving style accordingl y.
Drivers must alw ayswe arthe necessary personal
visual aids requ ired forth em todrive a vehicle.
Drivers with presb yopia (age-related long-sighted-
ness) should, if necessar y,we ar visual aids with
multifocal lenses tobe su1cient lyable tosee traf-
fi c including via the displa ys.
% Ifth e camera in there ar wind owis dirty, oper-
ate there ar wind owwiper with washer 0uid
(/ page 118) or clean there ar wind owman-
uall y.Obser vethe no tes on cleaning the digital
re arview mir ror (/ page 233). #
T
To use t
o use t he st
he standar
andar d r
d rear
ear vie
view mirr
w mirr or
or:
:mo vethe
switch toposition 1. #
T
To use t
o use t he display
he display :
:mo vethe switch toposition
2.
A
A djus
djus ting t
ting t he displa
he displa y br
y brightness
ightness
% The digital rearview mir ror is equipped with
light sensors on the front and back and auto-
matically adjusts the brightness of the display
to the lighting conditions. Do not co verthe
light sensors, e.g. with a stic ker. #
Press menu button 3once. #
Press button 4toreduce the display bright-
ness.
or #
Press button 5toincrease the display bright-
ness.
A
A djus
djusting t ting t he angle of t
he angle of t he camera
he camera #
Press menu button 3twice. #
Press button 4tomo vethe angle down-
wa rds.
or #
Press button 5tomo vethe angle upwards. Light and vision
121
121

R
R
ectifying pr
ectifying pr oblems wit
oblems with t
h the ho
he ho t-w
t-wat
ater auxiliary
er auxiliary
heat
heat er
er
F
F AIL
AIL ¨
¨appear
appear s on t
s on the r
he remot
emot e contr
e contr ol display
ol display
Po ssible cause:
R Signal transmission between transmit ter and
re ceiver is malfunctioning. #
Change your position in relation totheve hicle,
moving closer if necessar y.
F
F AIL appear
AIL appear s on t
s on the r
he remot
emot e contr
e contr ol display
ol display
Po ssible cause:
R The star ter battery is not su1ciently charge d. #
Char gethe star ter batter y.
Po ssible cause:
R The fuel tank is not /lled up tothere ser ve
le ve l. #
Refuel at the nearest /lling station.
F
F AIL appear
AIL appear s on t
s on the r
he remot
emot e contr
e contr ol displa
ol displa y
y¯
¯
Po ssible cause:
R The auxiliary heating has malfunctioned. #
Have the auxiliary heating checked at a quali-
/ed specialist workshop. A
A
uxiliar
uxiliar y w
y war
arm-air heat
m-air heat er
er F
F
unction of t
unction of t he auxiliar
he auxiliary w
y w ar
arm-air heat
m-air heat er
er
Obser vethe no tes on auxiliary heating
(/ page 129).
The air-in take opening forth e auxiliary warm-air
hea ter is located on the inner side of the leT front
seat base. The warm-air outlet is on there ar side
of the leT front seat.
The auxiliary warm-air hea ter supplements the cli-
mate control system of your vehicle and has an
auxiliary heating function.
The stationary heater will switch o. automatically
when theve hicle is switched o. or when the set
heating duration has elapsed.
The immediate heating mode of the auxiliary heat-
ing supports the climate control system when the
engine is running and the outside temp erature is
lo w.
The switch clo ckforth e auxiliary warm-air hea ter
is located in the lo wer centre console.
Yo u can use the switch clock toset up tothree
departure times for pre-entry climate control. Switc
Switc h cloc h cloc kov
k over ervie
vie w (auxiliar
w (auxiliar y w
y war
arm-air heat
m-air heat er)
er) 1
Select option / change values
2 Menu bar
3 Select option
4 Pressing brie0y :con/rms a selection or set-
ting
Pressing and holding: switches immediate
heating mode on/o.
5 Status bar
6 Pressing brie0y: switches switch clock on /
cancels or term inates the settings in a menu
Pressing and holding: term inates all functions
Switc
Switc hing t hing t he switc
he switc h cloc
h clock on (auxiliar
k on (auxiliar y w
y war
arm-air
m-air
heat
heat er)
er) #
Press button 6.
% The switch clock will switch tostandby mode
aTer ten seconds. The display will go o..
Se
Se tting t
tting t he switc
he switc h cloc
h clock (auxiliar
k (auxiliar y w
y war
arm-air heat
m-air heat er)
er)
Se
Se tting t
tting t he time
he time
Yo u must reset the da y,time and default value for
th e operating duration in thefo llowing cases:
R initial operation
R aTer a voltage supply inter ruption (e.g.if the
battery has been disconnected)
R aTer a malfunction #
Press button 1or3 until 4 0ashes on
menu bar 2. #
Press button 4. #
Press button 1or3 until Î0ashes. #
Press button 4. #
Use button 1or3 toset the hours. Climate control
133
133

Re
cuperation display 3showswhe ther and, if so,
how much kinetic energy is being con verted to
electrical energy while theve hicle is coasting. The
re cuperated energy is then stored in the star ter
batter y.
Displa
Displa ying tr
ying tr ip com
ip com put
puter "Fr
er "Fr om st
om st ar
art" or "Fr
t" or "Fr om
om
r
r ese
ese t"
t" #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Trip menu. #
Press thea button. #
Press the: or9 button toselect the
From start orFrom reset submenu.
The following values will be displa yed:
R 1Distance
R 2Length of journey
R 3Average speed
R 4Average fuel consum ption
The values on theFrom start submenurelate to
th ose measured since the start of the journe y.The
va lues on theFrom reset submenurelate tothose
measured since the submenu was last reset.
The trip computer will automatically be reset under
th efo llowing conditions:
R The vehicle has been switched o. for longer
th an four hours (only From start).
R A time of 9999 hours has been exceeded.
R A distance of 99,999 km has been exceeded.
Displa
Displa ying t
ying the digit
he digit al speedomet
al speedomet er
er #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Trip menu. #
Press thea button. #
Select the digital speedome ter using the:
or 9 button. R
R ese
ese tting v
tting v alues
alues
The values of thefo llowing functions can be reset:
R Trip distance
R "Fro m start" trip computer
R "Fro m reset" trip computer
R ECO display #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Trip menu. #
Press thea button. #
Use the: button toselect Yesand con-
/rm with thea button.
If th e ECO display values are reset, theva lues in
th e "F rom start" trip computer will also be reset. If
th eva lues in the "F rom start" trip computer are
re set, the ECO display values will also be reset. N
N
a
avig
vig ation menu
ation menu In
theNavi menu, the display sho wsnavigation
instructions from the multimedia system. #
Switch on the multimedia system. #
Press theò button tocall up the list of
menus. #
With th e: or9 button, select theNavi
menu. #
Press thea button tocon/rm.
R
R out
out e guidance no
e guidance no t active
t active 1
Direction of tr avel
2 Name of cur rent road
R
R out
out e guidance active
e guidance active Instrument clus
ter and on-board computer
185
185