2021 MERCEDES-BENZ V-CLASS climate control

re
ar cont rol panel toset the air0ow forth ere ar
compartment. Se
Se
tting t
tting t he t
he tem
emper
per ature
ature R
R
eq
eq uir
uir ements:
ements:
R The climate cont rolsystem is switched on. #
T
To incr
o incr ease or decr
ease or decr ease:
ease:press theto p or bot-
to m section of thew rock er switch.
Ve hicles with rear climate cont rol: use the air con-
ditioning menu of the multimedia system or the
re ar cont rol panel toset thete mp erature forthe
re ar compartment. Switc
Switc
hing t
hing t he sync
he sync hr
hr onisation function
onisation function on/o.
on/o. R
R
eq
eq uir
uir ements:
ements:
R The climate cont rolsystem has been switched
on (/ page 125).
The temp erature can be set centrally using the
synchronisation function. The temp erature setting
fo rth e driver's side will then be adop tedfo rthe
front passenger side and, in vehicles with rear cli-
mate cont rol,th ere ar compartment as well.
TEMPMA
TEMPMA TIC and THERMO
TIC and THERMO TR
TRONIC wit
ONIC wit h ho
h hot-w
t-wat
ater
er
auxiliar
auxiliar y heat
y heater
er #
Switch the "Synchronisation" function on and
o. via the air conditioning menu of the multi-
media system.
THERMO
THERMO TR
TRONIC wit
ONIC wit hout ho
hout hot-w
t-wat
ater auxiliar
er auxiliar y heat
y heater
er #
Press theto p or bottom section of rock er
switch 0.
The synchronisation function will be switched o. if
th e settings forth e front passenger side or rear
compartment are changed. Demis Demis
ting t
ting the windscr
he windscr een
een Yo
u can use this function todefrost and demist the
windscreen and the front side windo wsfrom the
inside. Switch o. the "Demist windscreen" function
as soon as the windscreen is clear.
% Vehicles with THERM OTRO NIC: if theve hicle
de tects mist on the windo ws,th e function will
automatically be switched on. #
Switch on climate control (/ page 125). #
T
To switc
o switc h
hon/o.:
on/o.: pushtheto p or bottom sec-
tion of the¬ rock er switch on the front
control panel.
If th e indicator lamp abo vethe¬ rock er
switch lights up, the function has been
switched on. The cur rent air-conditioning set-
tings will be deactivated.
The temp erature, air0ow and air distribution
will be regulated automatically tooptimise the
demisting e.ect. Air-recirculation mode will be
deactivated.
When you enable automatic mode, the "Demist
windscreen" function will switch o. automaticall y.
When you switch o. the "Demist windscreen" func-
tion, the pr evious settings for automatic climate
control will be applied again.
No tethefo llowing exceptions:
R Air-recirculation mode will remain switched o..
R Ifth e A/C function has been automatically
activated, it will remain active. Switc Switc
hing air
hing air -r
-recir
ecir culation mode
culation mode on/o.
on/o. When air-recirculation mode is switched on,
the
windo wsmay mist up more quickl y.Switch on ai r-
re circulation mode only brie0y. #
Press theto p or bottom section of theg
ro ck er switch.
When the indicator lamp abo vetheg
ro ck er switch lights up, air-recirculation mode
is switched on.
Air-recirculation mode will automatically switch on
in thefo llowing cases:
R in high outside tempe ratures
R while theve hicle is driving through a tunnel
(vehicles with THERM OTRO NIC automatic cli-
mate cont rol and navigation only)
ATer appr oximately 30 minutes, outside air will
automatically be introduced again.
Air-recirculation mode will automatically switch o.
in thefo llowing cases:
R aTer appr oximately /ve minutes at outside
te mp eratures below appr oximately 7°C
R aTer approximately /ve minutes when the
"Cooling with air dehumidi/cation" function is
deactivated
R aTer appr oximately 30 minutes at outside tem-
peratures abo veappr oximately 7°C and when Climate control
127 127

th
e "Cooling with air dehumidi/cation" function
is switched on. Conv
Conv
enience opening/closing
enience opening/closing &
W
WARNING
ARNING Risk of entrapment due tonot
paying attention during con venience clos-
ing
When the con venience closing feature is oper-
ating, parts of the body could become trapped
in the closing area of the side windo ws. #
When the con venience closing feature is
operating, moni torth e entire closing
process and make sure that no body
parts are in the closing area. &
W
WARNING
ARNING Risk of entrapment when open-
ing a side window
When opening a side windo w,parts of the body
could be dr awn in or become trapped between
th e side window and window frame. #
When opening, make sure that nobody is
to uching the side windo w. #
Release the button immediately if some-
body becomes trapped. #
Conv
Conv enience closing wit
enience closing wit h t
h the air
he air -r
-r ecir
ecir culation
culation
r
r ock
ock er switc
er switc h:
h:press and hold theg rock er
switch up or down until the side windo ws auto-
matically close.
The indicator lamp overth eg rock er switch
lights up. The initial position of the side win-
do ws is stored. Air-recirculation mode is acti-
va ted.
If yo u open the side windo wsmanually aTer
using con venience closing, they /rst open
au tomatically tothe initial position before con-
ve nience closing. #
T To int
o int err
errup
upt conv
t conv enience closing:
enience closing: release the
g rock er switch. #
Conv
Conv enience opening wit
enience opening wit h t
h the air
he air -r
-recir
ecir culation
culation
r
r ock
ock er switc
er switc h:
h:press and hold theg rock er
switch up or down until the side windo ws auto-
matically open.
The indicator lamp overth eg rock er switch
goes out. Air-recirculation mode is deactivated. #
T To int
o int err
errup
upt conv
t conv enience opening:
enience opening: release the
g rock er switch. #
Pr
Pre-entr
e-entr y climat
y climat e contr
e control and conv
ol and conv enience
enience
opening wit
opening wit h t
h t he key
he key :
:press and hold the%
button on thekey.
The side wind ows are automatically opened
and the climate control blo wer is activated. #
T
To int
o int err
errup
upt conv
t conv enience opening:
enience opening: release the
% button. Switc
Switc
hing t
hing t he r
he rear windo
ear windo w heat
w heater
er on/o.
on/o. The
rear wind owheater consumes a lot of elect ric-
ity. You should therefore switch o. there ar win-
dow heater as soon as there ar wind owis clear. #
Switch on theve hicle. #
Press theto p or bottom of the¤ rock er
switch.
If th e indicator lamp abo vethe¤ rock er
switch lights up, there ar wind owheater is
switched on.
The rear wind owheater will switch o. automati-
cally aTer a fewminutes. Switc Switc
hing t
hing t he r
he residual heat utilisation
esidual heat utilisation on/o.
on/o. When
theve hicle is switched o., it is possible to
make use of there sidual heat of the engine toheat
or ventila tetheve hicle interior for appr oximately
30 minutes. The heating or ventilation time
depends on the set vehicle interior temp erature. #
Switch o. theve hicle or remo vethekey. #
T
To switc
o switc h on:
h on:press theto p or bottom section
of the! rock er switch or press Á.
When residual heat utilisation is switched on,
th e indicator lamp abo vethe! rock er
switch or theÁ button will light up.
The blo wer will run at a low speed rega rdless
of the air0ow setting.
If th e "Residual heat" function is switched on at
high outside temp eratures, only the stationary
ve ntilation will be switched on. The blo wer will
th en run at medium speed. #
T
To switc
o switc h
ho.:
o.: press theto p or bottom section
of the! rock er switch or press Áagain.
The indicator lamp abo vethe! rock er
switch or theÁ button goes out.
Re sidual heat utilisation will switch o. automati-
cally in thefo llowing cases:
R aTer a running time of app roximately
30 minutes
R ifth e star ter battery's charge status is too low 128
128
Climate control

R
ifth eve hicle is switched on
R when the hot-water auxiliary heater is switched
on Oper
Oper ating air v
ating air v ents
ents A
A
djus
djusting t ting t he air v
he air v ents
ents &
W
WARNING
ARNING Risk of burns or frostbite due to
being too close tothe air vents
Ve ry hot or very cold air can 0ow from the air
ve nts. #
Make sure that all vehicle occupants
alw ays maintain a su1cient dis tance
from the air vents. #
If necessar y,direct the air0ow toano ther
area of theve hicle interior. A
A
djus
djusting t ting t he centr
he centr e air v
e air vents
ents #
T
T o open/close:
o open/close: turn controller 3or4 tothe
leT or right as far as it will go. #
T
T o adjus
o adjust t t the
he air0ow
air0ow dir
dir ection:
ection: hold centre air
ve nt 1 or2 bycont roller 3or4 and
mo veit up or down or tothe leT or right.
A
A djus
djusting t ting t he side air v
he side air v ents:
ents: #
T
T o open/close:
o open/close: turn controller 2clockwise or
anti-clockwise as far as it will go. #
T
T o adjus
o adjust t t the
he air0ow
air0ow dir
dir ection:
ection: hold side air
ve nt 1 bycont roller 2and mo veit up or
down or tothe leT or right. Opening/closing t
Opening/closing t he r
he rear air v
ear air v ents:
ents: 1
Adjustment wheel forve rtically adjusting and
re gulating air0 ow
2 Adjustment wheel for horizontally adjusting
air0ow
The air vents can be adjusted only on vehicles with
re ar-compartment air conditioning. #
T
To open:
o open: turn adjustment wheel 1ofthere ar
air vent tothe centre position. #
T
To close:
o close: turn adjustment wheel 1tothe
upper or lo wer end position. A
A
uxiliar
uxiliar y heating
y heating Inf
Inf
or
ormation about auxiliar
mation about auxiliar y heating
y heating &
D
DAN
AN GER
GER Risk of fata l injury due topoison-
ous exhaust gases
If th eta ilpipe is bloc ked or su1cient ventilation
is not possible, poisonous exhaust gases such
as carbon monoxide may enter theve hicle.
This is the case in enclosed spaces or if the
ve hicle gets stuck in sno w,forex ample. #
Always switch the stationary heater o. in
enclosed spaces without an air extrac-
tion system, e.g. in garage s. #
Keep theta ilpipe and the area around the
ve hicle free from snow when theve hicle
or the stationary heater is running. #
Open a wind owonthe side of theve hicle
fa cing away from the wind toensure an
adequate supply of fresh air. &
W
WARNING
ARNING Risk of /re due tohot stationary
heater components and exhaust gases
Flammable materials such as lea ves, grass or
twigs may ignite. #
When the stationary heater is switched
on, make sure that: Climate cont
rol
129
129

R
hot vehicle parts do not come into
contact with 0ammable materials.
R theex haust gas can 0ow out of the
stationa ryheater exhaust pipe unhin-
dered.
R theex haust gas does not come into
contact with 0ammable materials. The heater
forth e auxiliary heating is /t tedatthe
front of theve hicle underbod y.The emissions out-
let is on the leT side of theve hicle below the front
door. &
W
WARNING
ARNING Risk of poisoning during work
on the auxiliary warm-air hea ter
If wo rkon the heat exch anger of the auxiliary
wa rm-air hea ter is not per form ed cor rectl y,
ex haust fumes could leak into the passenger
compartment. #
Have all workon the auxiliary warm-air
hea ter car ried out at a quali/ed specialist
wo rkshop. If
yo u are transporting hazardous materials, com-
ply with there leva nt sa fety regulations. Place
objects a su1cient distance from the auxiliary
heating outlet opening.
* N
NO OTE
TE Damage tothe auxiliary heating due
to ove rheating If
th e 0ow of hot air is bloc ked, the auxiliary
heating may overheat and switch o.. #
Do not block the 0ow of hot air. *
N
NOOTE
TE Battery dischar gecaused bystation-
ary heater or stationa ryventilation ope ra-
tion Operating
the stationary heater or stationary
ve ntilation drains the batter y. #
ATer heating or ventilating theve hicle
twice, drive for a longer period of time. Yo
ur vehicle may be equipped with either a hot-
wa ter auxiliary heater or an auxiliary warm-air
hea ter.
The ho hot-w
t-w at
ater auxiliar
er auxiliar y heat
y heat er
eris adjusted and
ope rated using the& rock er switch on the cli-
mate control system operating unit and via the
multimedia system or byremo tecont rol. The auxiliar
auxiliar y w
y war
arm-air heat
m-air heat er
eris adjusted and oper-
ated via the switch clock on the lo wer centre con-
sole. Ho
Ho
t-w
t-w at
ater auxiliar
er auxiliar y heat
y heat er
er F
F
unction of t
unction of t he ho
he hot-w
t-wat
ater auxiliar
er auxiliar y heat
y heater
er
Obser vethe no tes on auxiliary heating
(/ page 129).
The hot-water auxiliary heater has a heater boos-
te r,stationary heater and stationary ventilation
function.
The stationary hea ter automatically adapts its
operating mode tochanges in outside temp erature
and weather conditions. It is therefore possible
th at the stationary heater may switch from ventila-
tion toheating mode or from heating toventilation
mode.
The stationary hea ter will automatically switch
itself o. aTer a maximum of 50 minutes. The
heater booster function helps toheat up theve hi-
cle while the engine is running and at low outside
te mp eratures.
Yo u can set up tothre e departure times for pre-
entry climate control byremo tecont rol or via the
multimedia system. The switch-on time is then cal-
culated based on the outside temp erature and the
activated departure time. This means that your
ve hicle is preheated or precooled bythe set depar-
ture time.
If th e departure time is reached and theve hicle is
not star ted, the auxiliary heating will continue to
ru nfo r appr oximately /ve more minutes. It will
th en switch o. automaticall y.
When the auxiliary heating is heating and theve hi-
cle is star ted, the heater booster function of the
auxiliary heating will be activated.
When the auxiliary heating is ventilating and the
ve hicle is star ted, the auxiliary heating will be auto-
matically switched o.. 130 130
Climate control

Switc
Switc
hing t
hing t he ho
he hot-w
t-wat
ater auxiliar
er auxiliar y heat
y heater
er on/o.
on/o.
wit
with t h the butt
he butt on
on
R
R eq
equir uir ements:
ements:
R The fuel tank is /lled abo vethere ser veleve l. The coloured indicator lamps abo
vethe&
ro ck er switch ha vethefo llowing meanings:
R Blue – stationary ventilation is switched on
R Red – the stationary heater is switched on
R Yellow – a departure time is preselected #
T
To switc
o switc h on:
h on:press theto p or bottom section
of rock er switch 1.
The red or blue indicator lamp abo verock er
switch 1will light up.
The multimedia system will be activated for
appr oximately one minute. #
Set the desired temp erature via the multimedia
system. #
T
To switc
o switc h
ho.:
o.: press theto p or bottom section
of rock er switch 1again.
The red or blue indicator lamp abo verock er
switch 1will go out. A
A
djus
djusting t ting t he ho
he ho t-w
t-wat
ater auxiliar
er auxiliar y heat
y heater b
er by r
y remo te
emo te
contr
contr ol
ol
R
R eq
eq uir
uir ements:
ements:
R The fuel tank is /lled abo vethere ser veleve l.
Switc
Switc hing on immediat
hing on immediat ely
ely #
Press and hold theu button until theON
message appears on there mo tecont rol's dis-
pla y.
Se
Se tting t
tting t he depar
he depar tur
ture time
e time #
Brie0y press the u button. #
Continue topress the, or. button
until the time tobe changed appears on the
displa y. #
Press theu and^ buttons simultane-
ousl y.
The Îsymbol on there mo tecont rol display
will 0ash. #
Set there qu ired departure time with the,
and . buttons. #
Press theu and^ buttons simultane-
ousl y.
The new departure time will be sa ved.
Up tothre e departure times can be sa ved. #
T To activ o activ at
ate t
e t he depar
he depar tur
tur e time:
e time: brie0y press
th eu button. #
Select there qu ired departure time with
th e, and. buttons. #
Press and hold the u button.
The Ísymbol, the departure time and,
depending on the selected departure time, let-
te r AA, B Bor C Cwill appear on there mo tecon-
trol's displa y. Climate control
131
131

#
T
To deactiv
o deactiv at
ate t
e t he depar
he depar tur
ture time:
e time: selectthe
re qu ired departure time and press and hold
th e^ button.
OFF will appear on the displa y. #
T
To c
o c hec
hec k t
k the st
he st atus of t
atus of t he activ
he active st
e stationar
ationar y
y
heat
heat er
er:
:brie0y press theu button.
Switc
Switc hing
hingo.
o.immediat
immediat ely
ely #
Press and hold the ^ button.
Ov
Ov er
ervie
vie w of r
w of r emot
emote contr
e contr ol display
ol display s (st
s (stationary
ationary
heating/v
heating/v entilation)
entilation) 1
Stationary ventilation switched on
2 Stationary heating switched on
3 Selected departure time
4 Remaining stationary heating or ventilation
time (in minutes)
5 Stationary heating or ventilation active
6 Depa rture time activated
7 Signal strength
Fu rther display options:
R T
Time:
ime: the selected departure time.
R 0 minut
0 minut es:
es:theru nning time of the stationary
heating extends as the operating temp erature
has not yet been reached when the engine is
star ted.
R OFF:
OFF: stationary heating or ventilation has been
switched o..
Changing t
Changing t he r
he remot
emot e contr
e control's batt ol's batt er
ery (st
y (st ationary
ationary
heat
heat er)
er) &
D
DAN
AN GER
GER Risk of fatal injuries due toswal-
lowing batteries
Bat teries contain toxic and cor rosive subs tan-
ces. Swall owing batteries may cause se vere
internal burns within two hours.
There is a risk of fatal injuries. #
Keep batteries out of there ach of chil-
dren. #
Ifth e battery co ver does not close
securel y,do not continue touse the
re mo tecont rol, and keep it out of the
re ach of children. #
If batteries are swallo wed, seek medical
attention immediatel y. +
ENVIR ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEEnvironmen tal
damage due toimproper disposal of bat-
te ries Batteries contain
toxic and cor ro-
sive subs tances. #
Ta
ke dischar ged batteries to a
qu ali/ed specialist workshop or toa col-
lection point for used batteries. R
R
eq
eq uir
uir ements
ements
R A CR2450 lithium battery is available.
Mercedes-Benz recommends that you ha vethe
battery replaced byaqu ali/ed specialist work-
shop. #
Push a poin ted object into recess 1. #
Slide battery co ver2 backwards in the direc-
tion of the ar row. #
Insert new battery 3with the lettering facing
upwards. #
Slide battery co ver2 onto there mo tecont rol
in the opposite direction tothe ar row until the
battery co ver engages. 132
132
Climate control

R
R
ectifying pr
ectifying pr oblems wit
oblems with t
h the ho
he ho t-w
t-wat
ater auxiliary
er auxiliary
heat
heat er
er
F
F AIL
AIL ¨
¨appear
appear s on t
s on the r
he remot
emot e contr
e contr ol display
ol display
Po ssible cause:
R Signal transmission between transmit ter and
re ceiver is malfunctioning. #
Change your position in relation totheve hicle,
moving closer if necessar y.
F
F AIL appear
AIL appear s on t
s on the r
he remot
emot e contr
e contr ol display
ol display
Po ssible cause:
R The star ter battery is not su1ciently charge d. #
Char gethe star ter batter y.
Po ssible cause:
R The fuel tank is not /lled up tothere ser ve
le ve l. #
Refuel at the nearest /lling station.
F
F AIL appear
AIL appear s on t
s on the r
he remot
emot e contr
e contr ol displa
ol displa y
y¯
¯
Po ssible cause:
R The auxiliary heating has malfunctioned. #
Have the auxiliary heating checked at a quali-
/ed specialist workshop. A
A
uxiliar
uxiliar y w
y war
arm-air heat
m-air heat er
er F
F
unction of t
unction of t he auxiliar
he auxiliary w
y w ar
arm-air heat
m-air heat er
er
Obser vethe no tes on auxiliary heating
(/ page 129).
The air-in take opening forth e auxiliary warm-air
hea ter is located on the inner side of the leT front
seat base. The warm-air outlet is on there ar side
of the leT front seat.
The auxiliary warm-air hea ter supplements the cli-
mate control system of your vehicle and has an
auxiliary heating function.
The stationary heater will switch o. automatically
when theve hicle is switched o. or when the set
heating duration has elapsed.
The immediate heating mode of the auxiliary heat-
ing supports the climate control system when the
engine is running and the outside temp erature is
lo w.
The switch clo ckforth e auxiliary warm-air hea ter
is located in the lo wer centre console.
Yo u can use the switch clock toset up tothree
departure times for pre-entry climate control. Switc
Switc h cloc h cloc kov
k over ervie
vie w (auxiliar
w (auxiliar y w
y war
arm-air heat
m-air heat er)
er) 1
Select option / change values
2 Menu bar
3 Select option
4 Pressing brie0y :con/rms a selection or set-
ting
Pressing and holding: switches immediate
heating mode on/o.
5 Status bar
6 Pressing brie0y: switches switch clock on /
cancels or term inates the settings in a menu
Pressing and holding: term inates all functions
Switc
Switc hing t hing t he switc
he switc h cloc
h clock on (auxiliar
k on (auxiliar y w
y war
arm-air
m-air
heat
heat er)
er) #
Press button 6.
% The switch clock will switch tostandby mode
aTer ten seconds. The display will go o..
Se
Se tting t
tting t he switc
he switc h cloc
h clock (auxiliar
k (auxiliar y w
y war
arm-air heat
m-air heat er)
er)
Se
Se tting t
tting t he time
he time
Yo u must reset the da y,time and default value for
th e operating duration in thefo llowing cases:
R initial operation
R aTer a voltage supply inter ruption (e.g.if the
battery has been disconnected)
R aTer a malfunction #
Press button 1or3 until 4 0ashes on
menu bar 2. #
Press button 4. #
Press button 1or3 until Î0ashes. #
Press button 4. #
Use button 1or3 toset the hours. Climate control
133
133

#
Press button 4. #
Use button 1or3 toset the minutes. #
Press button 4.
Se
Se tting t
tting t he time f
he time f or
ormat
mat #
Press button 1or3 until 4 0ashes on
menu bar 2. #
Press button 4. #
Press button 1or3 until the symbol forthe
time form at 0ashes. #
Press button 4. #
Select the desired time form at using button 1
or 3. #
Press button 4.
Se
Se tting t
tting t he day
he day #
Press button 1or3 until 4 0ashes on
menu bar 2. #
Press button 4. #
Press button 1or3 until the symbol forthe
day 0ashes. #
Press button 4. #
Use button 1or3 toselect the desired day
of thewe ek. #
Press button 4.
Switc
Switc hing immediat
hing immediat e heating mode
e heating mode on/o.
on/o. #
T
To switc
o switc h on:
h on: press button 4until y
0ashes on menu bar 2.
On will brie0y appear on the displa y,follo wed
by there maining operating duration or the
à symbol for continuous operation. #
T
To switc
o switc h
h o.:
o.: press button 4until Off
appears on the displa y.
Se
Se tting t
tting t he depar
he depar tur
ture time (auxiliar
e time (auxiliar y w
y war
arm-air
m-air
heat
heat er)
er)
Yo u can set thre e departure times with the switch
cloc k.Fo llowing malfunctions or if the battery has
been disconnected, you will need tore-set the
departure times.
Selecting a pr Selecting a pr ogr
ogram memory
am memory #
Press button 1or3 until j0ashes on
menu bar 2. #
Press button 4.
The numbers of the prog ram memories are
shown on status bar 5. The tick denotes acti-
va ted prog ram memories. #
Use button 1or3 toselect the desired pro-
gr am memor y. #
Press button 4.
A
A ctiv
ctiv ating/deactiv
ating/deactiv ating pr
ating progr
ogram memor
am memor ies
ies #
Use button 1or3 toselect OnorOff. #
Press button 4.
Editing pr
Editing pr ogr
ogram memor
am memor ies
ies #
Use button 1or3 toselect 4. #
Press button 4. #
Set the day of thewe ek and the time
(/ page 133).
Se
Se tting t
tting t he t
he tem
emper
per atur
atur e and oper
e and oper ating dur
ating duration
ation
(auxiliar
(auxiliar y w
y war
arm-air heat
m-air heat er)
er) #
Press button 4. #
Set thete mp erature with button 1or3. #
Press button 4. #
Set the operating duration with button 1or
3 or select theà symbol for continuous
operation. #
Press button 4.
% The operating duration set is the default set-
ting for immediate heating mode. You can set
th e operating duration within a range of 10 to
120 minutes or tocontinuous operation.
R
R ectifying pr
ectifying pr oblems wit
oblems with t
h the auxiliar
he auxiliar y w
y war
arm-air
m-air
heat
heat er
er
The messag
The messag e
eERROR appear
appears on t
s on the switch
he switch
cloc
cloc k's displa y.
k's displ ay.
Po ssible cause:
R A malfunction has occur red. #
Have the auxiliary heating checked at a quali-
/ed specialist workshop.
The messag
The messag e
eINIT appear
appear s on t
s on the switc
he switc h cloc
h clock's
k's
displa y.
displa y.
Po ssible cause:
R The po wer supply has been inter rupted. All
sa ved settings ha vebeen dele ted.
Au tomatic hardware de tection is cur rently
active. #
When automatic ha rdwa redetection is com-
ple te, set the day of thewe ek, time and operat-
ing duration (/ page 133). #
Set the departure time (/ page 134). 134
134
Climate control