2021 MERCEDES-BENZ S-CLASS SALOON LONG battery

Combo 2
vehicle soc ket #
Press the centre rear section of soc ket 0ap
1 and swing the soc ket 0ap forw ards and
open.
The % indicator lamp 3and upper status
displ ay4 light up white. %
When theve hicle is switched on (the õ
displ ayis lit in the driver's display), soc ket 0ap
1 cannot be opened. #
Press catch 7totheright and fold up soc ket
co ver2.
% Vehicles with a vehicle soc ket combo requ ire
only connection 6forth ech arging cable
connector. Open only the upper part of soc ket
co ver2. #
Tocharge at a mains soc ket, insert the mains
plug into the mains soc ket of theex tern al
po we r source as far as it will go. #
Insert thech arging cable connector into vehi-
cle soc ket connection 6tothe stop. If the
wa llbox/charging station is not equipped with
a ch arging cable, inse rtthe plug of theve hi-
cle's charging cable into thewa llbox/charging
station soc ketto the stop.
Make sure that thech arging cable is not taut
when inser ted.
The # indicator lamp 5and lo wer status
display 40ash orange and, as soon as the
high- voltage battery is charge d, green. %
When thech arging sequence forth e ambient
lighting is activated, the ambient lighting lights
up for appr oximately 30 seconds as with the
# indicator lamp 5(/ page 179).
When thech arging cable is connected totheve hi-
cle, theve hicle cann otbe star ted or mo ved.
At the start of thech arging process, thech arge
le ve l display is shown in the driver's display with a
ch arging prediction. The charging prediction
re fers to the time at which the high-voltage bat-
te ry will be fully charge d.
% Depending on thete mp erature, thefa n and
bat tery cooling system may audibly switch on
during thech arging process.
% Ifth eve hicle is idle for lengt hyperiods and
connected tothe mains suppl y,the high-volt-
age battery will be rech arge d automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control). 252 252
Driving and parking

Combo 1
vehicle soc ket Combo 2
vehicle soc ket #
Press the centre rear section of soc ket 0ap
1 and swing the soc ket 0ap forw ards and
open.
The % indicator lamp 3and upper status
displ ay4 light up white. %
When theve hicle is switched on (the õ
displ ayis lit in the driver's display), soc ket 0ap
1 cannot be opened. #
Press catch 7totheright and fold up soc ket
co ver2.
% The CCS charging cable connector requ ires
connections 6and 8. Therefore, it is nec-
essary toopen bo thparts of soc ket co ver2. #
Insert the CCS charging cable connector into
th eve hicle soc ketto the stop.
Make sure that thech arging cable is not taut
when inser ted.
The # indicator lamp 5and lo wer status
display 40ash orange and, as soon as the
high- voltage battery is charge d, green.
% When thech arging sequence forth e ambient
lighting is activated, the ambient lighting lights
up for appr oximately 30 seconds as with the
# indicator lamp 5(/ page 179).
When thech arging cable is connected totheve hi-
cle, theve hicle cann otbe star ted or mo ved.
At the start of thech arging process, thech arge
le ve l display is shown in the driver's display with a 256 256
Driving and parking

ch
arging prediction. The charging prediction
re fers to the time at which the high-voltage bat-
te ry will be fully charge d.
% Depending on thete mp erature, thefa n and
bat tery cooling system may audibly switch on
during thech arging process.
% Ifth eve hicle is idle for lengt hyperiods and
connected tothe mains suppl y,the high-volt-
age battery will be rech arge d automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control). Ending t Ending t
he dir
he direct curr
ect curr ent c
ent char
harging pr
ging pr ocess (mode
ocess (mode
4)
4) R
R
eq
eq uir
uir ements:
ements:
R The distance between theke y and theve hicle
does not exceed 1 m. Combo 1 v
Combo 1 v
ehicle socket
ehicle soc ket #
Press charging inter ruption button 3.
The charging process is ended. The %indi-
cator lamp 1lights up white. The vehicle
soc ket is unloc ked. #
Press and hold button 2onthech arging
cable connector and remo vethech arging
cable connector from theve hicle soc ket. %
Ifyo u cannot remo vethech arging cable con-
nector, unlock theve hicle and repeat the pro-
cedure. If thech arging cable connector is still
loc ked, contact a quali/ed specialist work-
shop. #
Close the soc ket co ver and the soc ket 0ap.
Combo 2 v
Combo 2 v ehicle socket
ehicle soc ket Driving and parking
257
257

Syst
Syst
em limits
em limits
De tection may be restric ted in thefo llowing situa-
tions:
R theve hicle is damaged without impact, for
ex ample, if an outside mir ror is torn o. or the
paint is damaged byakey
R an impact occurs at low speed
R the electric parking brake is not applied Se
Se
tting collision det
tting collision det ection on a park
ection on a parked v
ed vehicle
ehicle Multimedia system:
4 © 5
Settings 5
Vehicle
5 Open/close 5
Vehicle protection #
Activate or deactivate the function via Colli-
sion notification.
% A maximum of thre e incidents can be regis-
te re d. Up to15 pho tos are take nfo rev ery
incident. In theev ent of ano ther incident, the
pho tos of the /rst incident will be overwritten
if th ey have not been dele ted already. A
A
ctiv
ctiv ating or deactiv
ating or deactiv ating t
ating the collision phot
he collision phot os
os
function
function
No tepossible legal restrictions in some count ries
re ga rding automatic recording of theve hicle sur-
ro undings. #
Activate or deactivate Take photos.
T T r
ransf
ansf err
erring t
ing t he collision phot
he collision phot os wit
os with t
h the
he
Mer
Mer cedes me App
cedes me App #
Select Upload to Mercedes me . #
Select Upload automatically . #
Scan thege nerated QR code on the central
display with the Mercedes me App.
The encryp ted collision pho tos will then be
uploaded toMercedes me.
% Any device that can scan QR codes can be
used toview the collision pho tos in the
Mercedes me App.
Cop
Cop ying t
ying t he collision phot
he collision phot os t
os to a USB
o a USB 0ash
0ashdr
drive
ive #
Connect a USB 0ash drive . #
Select Manage collision photos . #
Select Copy (USB).
All collision pho tos are copied tothe USB
0ash drive.
% Toensure secure operation, only use with
FA T32 or exFA Tfo rm atted USB storage devi-
ces.
Dele
Dele ting collision phot
ting collision phot os
os #
Select Manage collision photos. #
Select Delete.
All collision pho tos will be dele ted. N
No
ot
tes on par
es on par king up t
king up the v
he vehicle
ehicle If
yo u lea vetheve hicle par ked up for longer than
six weeks, it may su.er damage thro ugh disuse.
The 12 V battery may also be impaired or dam-
aged byheavy discharging.
% Further information can be obtained at a
qu ali/ed specialist workshop. Driving and parking
265 265

S
S
t
tandb
andb y mode (e
y mode (e xt
xtension of t
ension of t he st
he start
arter batt
er batt er
ery's
y's
per
per iod out of use)
iod out of use) S
S
t
tandb
andb y mode function
y mode function
% This function is not available for all models.
If standby mode is activated, energy loss will be
minimised during extended periods of non-opera-
tion.
St andby mode is characterised bythefo llowing:
R The star ter battery is preser ved.
R The maximum non-operational time appears in
the driver's displa y.
R The connection toonline services is inter rup-
te d.
If th efo llowing conditions are ful/lled, standby
mode can be activated or deactivated using the
multimedia system:
R The vehicle is switched on.
R The vehicle has not been star ted.
Exceeding theve hicle's displ ayed non-operational
time may cause incon venience; i.e. it cannot be
guaranteed that the star ter battery will reliably
start theve hicle. Char
gethe star ter battery in thefo llowing situa-
tions:
R The vehicle's non-ope rational time must be
ex tended.
R The star ter battery charge leve l is insu1cient
fo r standby mode.
% Standby mode is automatically deactivated
when theve hicle is switched on.
A A ctiv
ctiv ating/deactiv
ating/deactiv ating st
ating standb
andby mode (par
y mode (par king up
king up
t
t he v
he v ehicle)
ehicle)
R
R eq
eq uir
uir ements:
ements:
R The vehicle has been switched on but not star-
te d.
Multimedia system: 4 © 5
Settings 5
Vehicle
5 Opening/closing #
Activate or deactivate Standby mode. Dr
Dr
iving and dr
iving and dr iving safe
iving safety sy
ty syst
stems
ems Dr
Dr
iving syst
iving syst ems and y
ems and y our r
our responsibility
esponsibility Yo
ur vehicle is equipped with driving systems
which assist you in driving, parking and manoeu-
vring theve hicle. The driving systems are only
aids. They are not a substitute foryo ur attention
to the sur roundings and do not relie ve you of your
re sponsibility per taining toroad tra1c la w.The
driver is alw aysre sponsible for maintaining a safe
distance totheve hicle in front, forve hicle speed,
fo r braking in good time and for st aying in lane.
Pa y attention tothe tra1c conditions at all times
and inter vene when necessar y.Be awa reofthe
limitations rega rding the safe use of these sys-
te ms.
Driving systems can neither reduce therisk of
accident if youfa ilto adapt your driving style nor
ove rride the la wsof ph ysics. They cannot alw ays
ta ke into account road, weather or tra1c condi-
tions. 266
266
Driving and parking

#
Do not open or close any doors or the
boot lid. #
Do not initiate the le vel control and do
not operate theDY NAMIC SELECT
switch. #
Do not lo ckor unlock theve hicle. R
R
eq
eq uir
uir ements:
ements:
R The ball neck is extended and engaged in a
securely loc ked position.
Tr ailers with a 7-pin plug can be connected tothe
ve hicle with thefo llowing adap ters:
R Adapter plug
R Adapter cable
The trailer will be cor rectly de tected bytheve hi-
cle only if thefo llowing conditions are met:
R The trailer is connected cor rectl y.
R The trailer lighting system is in working order.
The functions of thefo llowing systems will be
a.ec tedbya cor rectly connected trailer:
R ESP ®
trailer stabilisation R
Active Lane Keeping Assist
R Parking Assist PARKTRONIC
R Active Parking Assist
R Blind Spot Assist or Active Blind Spot Assist
R Drive Away Assist
R Cross tra1c warning
R Manoeuvring brake function
R Reversing camera
R 360° camera
R AIRMATIC
R E-AC TIVE BODY CONTROL
Coupling up a tr
Coupling up a tr ailer
ailer
* NO
NOTE
TEDamage tothe star ter battery due
to full dis charge Charging
the trailer battery using the po wer
supply of the trailer can damage the star ter
batter y. #
Do not use theve hicle's po wer supply to
ch arge the trailer batter y. #
Remo vethe co ver cap from the ball head and
store it in a safe place. #
Position the trailer on a le vel sur face behind
th eve hicle and couple it up totheve hicle. #
Open the soc ket cap. #
Inse rtthe plug with lug 1ingroo ve 3 on
th e soc ket. #
Turn bayonet coupling 2totheright as far as
it will go. #
Let the cap engage. #
Secure the cable tothe trailer with cable ties
(only if you are using an adap ter cable). 340
340
Driving and parking

N
N
o
ot
tes on t
es on t he dr
he driv
iver's display
er's display &
W
WARNING
ARNING Risk of accident if the driver
display fails
If th e driver display has failed or is malfunc-
tioning, function restrictions in systems rele-
va nt tosaf ety cann otbe de tected.
The operating saf ety of your vehicle may be
impaired. #
Drive on carefull y. #
Have theve hicle checked immediately at
a qu ali/ed specialist workshop. If
th e operating saf ety of your vehicle is impaired,
park theve hicle immediately and safel y.Contact a
qu ali/ed specialist workshop.
The driver's display sho wsbasic information such
as speed, engine speed, fuel le vel, coolant tem-
perature as well as indicator and warning lamps.
Ad ditional functions available toyou include the
fo llowing:
R Di.erent menus, e.g. for assistance and navi-
ga tion R
Status displ aysfo rth e driving systems
R Display messages
R Information on speed, Consumptionand
ra nge
R Pow er me ter le vel and state of charge ofthe
high- voltage battery
R Indicator and warning lamps
Yo ur plug-in hybrid vehicle is also /tted with the
fo llowing warning and indicator lamps:
R -
õ Drive is activated
- ° "Foot o. the accelerator"
(/ page 226)
- ò Acoustic presence indicator inopera-
tive
The menu contents and settings can be individu-
ally adap ted and set. N No
ot
tes on t
es on t he 3D dr
he 3D dr iv
iver's display
er's display
The 3D driver's display enables a spatial represen-
ta tion of the content of the driver's displa y.It is a prerequisi
tethat the driver be recorded bythe
driver camera.
Sy Sy st
stem limits
em limits
The system may be impaired or may not function
in thefo llowing situations:
R The driver camera is deactivated or is not
working.
R The driver is outside the de tection range of
th e driver camera.
R The operating conditions are not in place, e.g.
ifth e outside temp erature is too low or too
high. Oper Oper
ating t
ating t he dr
he driv
iver's displ ay
er's display &
W
WARNING
ARNING Risk of distraction due toinfor-
mation systems and communications
equipment
If yo u operate information systems and com-
munications equipment integ rated in theve hi-
cle when driving, you could be distracted from Driver display
345 345

V
V
ehicles wit
ehicles wit h a 48 V on-boar
h a 48 V on-boar d electr
d electrical syst
ical syst em
em 1
The area sho ws the electric drive support.
2 This area sho ws there cuperation behaviour of
th e electric mo tor.
% Due tovarious system limits, theva lues dis-
pla yed may temp orarily di.er slightly from the
actual value. F
F
unction of t
unction of t he pow
he power met
er meter
er 1
Start of the POWER display range
2 End of the POWER display range
3 Current state of charge ofthe high-voltage
battery
4 Maximum rega ined output
5 Start of the display range of there cuperated
energy
In elect ric mode, the area 1-2 showswhat
percentage of the electrical drive is cur rently
being used. The combustion engine is switched
on at a percentage of 100%. In boost mode, theelectrical po
wer assistance of the drive is dis-
pla yed.
The area 45shows th ere cuperation and
ch arging behaviour using the combustion engine.
% Due tovarious system limits, the displa yed
va lue 4 may temp orarily di.er slightly from
th e actual value. Ov Ov
er
ervie
vie w of st
w of st atus display
atus display s on t
s on the dr
he driv
iver's dis-
er's dis-
play
play
The status displa ysforth e driving and driving
saf ety sy stems can be found in display sections
1 to4 . 352
352
Driver display