2021 MERCEDES-BENZ METRIS trip computer

1
Èand 0078buttons
2 Multifunction display
3 0074and 0075buttons
If yo ut urnt he keytop osition 0047inthei gnition
loc k,theo n-boar dcomputer will be activated.
If yo ur emo vethek ey,then quickl yre-inser tit
and tur nittop osition0047,the on-boar dcomputer
and instrument clus terw illn ot be activated.
Yo uc an control thed ispla ymessages and set‐
tings in theo n-boar dcomputer wit hbuttons 1
and 3onthei nstrument clus ter.
Button sonthe instrumen tclust er
È Press brief
ly:
R Selects them enu or display
R Inthe Settings menu:exits the
submenu without adopting thel ast
setting and returns tothem ain
menu
È Press and hold:
R Returns tothes tanda rddispla yor
th eD ista nce menu wi thout adopt‐
ing thel asts etting
0078 Press briefl
y:
R Selects asubmenu or function
R Confirms thes elected entry onthe
lis tort he displa y,or confirms the
setting 0078
Press and hold:
R Resets thet ripd ista nce and trip
computer values
R Inthem ain menu of theSettings
menu, resets tofactor ysettings
R Inthe Settings menu,resets values
and returns tothem ain menu
00740075 R
Sets thei nstrument lighting (no tin
the Settings menu)
R Scroll thro ugh lists
R Chan gevalues or settings Overvie
wand operation of theo n-boa rd
compu ter( ve hicles with steering-wheel but‐
to ns) &
WARNING Risk of distraction from infor‐
mation sy stems and communications
equipment
If yo uo perat einformation and communica‐
tio ne quipment integ ratedint hevehicle when
driving, youw ill be distracted from thet raffic
situation. This could also cause youtol ose
control of thev ehicle. #
Onlyoperat ethis equipment when the
traf fics ituation permits. #
Ifyo uc anno tbes ureoft his,stop the
ve hicle whils tpaying attention toroad
and traf ficc onditions and ope rate the
equipment wit hthe vehicle stationar y. Yo
um usto bse rvet he legal requirements fort he
countr yinwhich youa recur rentl yd riving when
ope rating theo n-boar dcomputer. 13 8
Instrument clus tera nd on-boar dcomputer

1
Displ ay
2 Right cont rolp anel
3 Leftcontrol panel
If yo ut urnt he keytop osition 0047inthei gnition
loc k,theo n-boar dcomputer will be activated.
Yo uc an control thed ispla ysand thes ettings on
th eo n-boar dcomputer using thes teering-wheel
buttons on lef tcont rolp anel 3.
Yo uc an use thes teering-wheel buttons on right
contro lpanel 2tocontrol thef unctions of the
audio sy stem and switc honthevoice control
function of then avigation sy stem (see thes epa‐
ra te Operating Instructions).
Ste ering wheel but tons Lef
tcontrol panel on thes teering wheel
0059
0065 R
Call up them enu bar on thed is‐
play
R Select amenu
0064
0063 Press briefly
R Scroll thro ugh lists
R Select asubmenu or function
R Inthe Audio menu, open thet rack
or statio nlista nd selec tastation
or audio track
R Inthe Telephone menu, switc hto
th et elephone book and select a
name or atelephone number. Lef
tcontrol panel on thes teering wheel
0064
0063 Press and hold
R Quickl yscroll thro ugh all lists
R Inthe Audio menu, select astation
or audio trac kusingrapid scroll
R Inthe Telephone menu withthe
te lephon ebook open, star tr apid
scroll.
0076 R
Confir mdispla ymessages
R In all menus, con firm thes elected
entry onthel istort he display
R IntheA udio menu, stop thes tation
sear chfunction
R Inthe Telephone menu, switc hto
th et elephone book and star td ial‐
ing fors elected numbers
0038 Press brief
ly
R Back
R Hide displa ymessages
R Inthe Audio menu, exitth et rack
or statio nlist
R Exit thet elephone book or redial
memory
R Vehicles wit hnavigation sy stem:
switc hoffvo ice control forn aviga‐
tion (see them anufacturer's oper‐
ating instructions)
0038 Press and hold
R Call up thes tandar ddispla yint he
Trip menu Right control panel on
thes teering wheel
0061 R
Mak eora cceptacall
R Swit chtother edial memory
0076 R
Reject or end acall
R Exit thet elephone book or redial
memory
0081
0082 R
Adjus tthe volume Instrument clus
tera nd on-boar dcomputer 13 9

00C5
Re
ar wind owwiper (/ page86) Setting
thei nstrument lighting &
WARNING Risk of accident and inju ry
during inter vention bythes teering wheel
If yo ur eac hthrough thes teering wheel to
operat ethe adjustment knobs while driving,
yo uc oul dlose control of thev ehicle. #
Use thea djustmen tknobs onl ywhen
th ev ehicle is at astandstill. #
Do no treac hthrough thes teering wheel
while driving. Brightness cont
rol(ex ample: vehicle wit hsteer‐
ing-wheel buttons)
The displa yson thei nstrument clus tera re illumi‐
nated during thed ay.Ad imming functio nisnot
possible in da ylight.
In vehicles wit hsteering-wheel buttons, thel ight
sensor on thei nstrument clus tera utomatically
controls theb rightness of thed ispla ylighting.
When thel ight has been switched on, theb right‐
ness cont rolisi nfluenced bythea mbient light.
Yo uc an then adjus tthe brightness of thei nstru‐
ment lighting and thed ispla ylighting as well.
Ve hicles without steering-wheel but tons: #
Press the0074or0075 button on thei nstrument
clus ter.
% Ifthe Settings menu has been selected on
th eo n-boar dcomputer ,itwill notbep ossible
to adjus tthe displa ybrightness.
Ve hicles with steering-wheel but tons: #
Turn brightness control 1onthei nstrument
clus ter. Overvie
wofmenus on theo n-boa rdcom‐
pu ter
Ve hicles without steering wheel but tons
Press theÈbutton on thei nstrument clus terto
scroll thro ugh them enus.
Yo uw ill see theSettings menu onl yifthevehicle
is stationar y.
If yo us crol lfor wa rdsint heSettings menu using
the 0078button, thes ettings fort he pr evious sub‐
men uort he previous function will be copied over.
If yo up ress the Èbutton in asubmenu, thes ub‐
menu or function will be exited without thes et‐
ting being adop ted.
Yo uc an find fur ther operating information in
"Overvie wand operation of theo n-boar dcom‐
puter" (/ page137).
Depending on thev ehicle equipment, youc an call
up thef ollowing menus, displa ysor functions:
R Displa yshowing trip dis tance and total dis‐
ta nce (/ page 142)
R Trip computer displa y(/ pag e142)
R Displ ayshowing cur rent range
R Displa yshowing cur rent fue lconsu mption
(/ page 142)
R Digital speedome ter
R Displ ayshowing coolant temp erature
(/ page142)
R Displ ayshowing displa ymessages in them es‐
sag em emor y(/pag e235)
The following menus, displa ysand function swill
also be displa yedw hen thev ehicle is stationary:
R Displa yshowing next servic edue date
(/ page175)
R Electroni cchec kont he engine oil le vel
( / pag e178)
R Tire pressur emonitoring sy stem restart
(/ page209)
R The Settings menufor adjusting or activating
and deactivating driving and driver assis tance
sy stems as well as displa yoptions
(/ page143)
Ve hicles with steering wheel but tons
Use the0059 or0065 steering-wheel button to
sho wthe menu bar and scroll thro ugh them enus.
Use the0064 or0063 steering-wheel button to
scroll thro ugh their submenus and functions. Instrument clus
tera nd on-boar dcomputer 141

Yo
uc an find fur ther operating information in
"Overvie wand operation of theo n-boar dcom‐
puter" (/ page138).
Depending on thev ehicle equipment, youc an call
up thef ollowing menus:
R Trip menu (/ page145)
R Navi menu (navigation instructions)
(/ page146)
R Audio menu (/ page147)
R Telephone menu (/page147)
R DriveAssist menu (/page 144)
R Service menu (/ page 144)
R Settings menu (/ page 148) Menu
sand submenu s(vehicles without
st eering wheel but tons) Calling up
thed istance menu Use
theb uttons on thei nstrument clus ter. #
Todispl aythed istance: press and hold the
È button until thed ispla yshows theo dome‐
te rf or thet ripd ista nce and thet otal dis‐
ta nce. #
Torese tthe trip distance: press and hold
the 0078 button until thet ripd ista nce is reset
to 0.0. Tr
ip computer menu Use
theb uttons on thei nstrument clus ter. #
Todispl ay:press theÈbutton toselect the
trip compu terd ispla y.
The values displa yedr elat etot hose meas‐
ured since thet ripc omputer waslastreset.
The following values will be displa yed:
R Distance
R Leng thof journey
R Averag efuel consum ption
R Averag espeed #
Torese tv alues: press and hol dthe 0078 but‐
to nu ntilallva lues ar ereset.
The trip computer will automatically be rese tif
th ev alue exceed s9999 hou rsor 99,999 mi
(99,999 km). Cur
rent fuel consum ption menu Cur
rent fue lconsu mptionm enu (e xamp le)
1 Recuperation display
2 Current fuel consum ption #
Press theÈbutton toselect thef uel con‐
sum ption bar displa y.
Re cuperation display 1showswhe ther and, if
so, ho wmuchk inetic energy is being transformed
int oe lectric cur rent whil stthev ehicle is coasting.
The recuperated energy is then stored in the
st ar terb atter y.Re cuperation display 1is
dependent on thee ngine ins talled and is there‐
fo re nota vailable in all vehicles. Coolant
temperatur emenu &
WARNING Risk of bu rnsw hen opening
th eh ood
If yo uo pen theh ood when thee ngine has
ove rheated or when ther eisaf ireint he
engine compartment, thef ollowing situations
ma yoccur:
R Youc oul dc om eintoc ontact wi thhot
ga ses.
R Youc oul dc om eintoc ontact wi thother
hot, escaping operating fluids. #
Befor eopening theh ood, allo wthe
ove rheated engine tocool down. #
Inthee vent of afireint he engine com‐
partment, keep theh ood closed and call
th ef ires ervice. Use
theb uttons on thei nstrument clus ter. #
Press theÈbutton toselect thec oolant
te mp eratur ebar display 00AC.
During normal driving and if thec oolant le vel
is cor rect, thed ispla yisp ermitted torise to
th el etter H. 14 2
Instrument clus tera nd on-boar dcomputer

Settings menu
Re
quirements:
R The vehicle is stationar y.
Use theb uttons on thei nstrument clus terto
operat ethe on-board computer.
Introduction #
Todispl aytheS ettings menu: usetheÈ
button toselect theSettings menu.
Use the0078button toscroll thro ugh them enu and
select its submenus or functions successivel y.
If yo up ress the Èbutton in asubmenu, thes ub‐
menu or function will be exited without thes et‐
ting being adop ted.
Depending on thee quipment, thef ollowing is
possible:
R Setting thel anguag eofthe displa ymessages
and displa ys
R Switching ESP ®
on/of f(/pag e111,112 )
R Setting thes ensitivity of ther ain sensor
R Swit ching ATTENTION ASSIS Ton/off
(/ page128)
R Setting theu nit ford ista nce, consu mption
and speed displ ays
R Setting thet ime and date #
Torese ttof actor ysettings: turnthe keyto
position 0047inthei gnition loc kand, in the
Settings menu,press and hol dthe 0078 button
fo ratl east five seconds.
Fo rs afet yr easons, no tall function swill be reset.
Setting thed ispla ylanguage #
Press 0078toselect theLanguage: submenu.
The displa ywill sho wthe cur rent language
selection. #
Use the0074or0075 button toselect alanguage. #
Press the0078button toconfirm.
The next submenu will be shown on thed is‐
pla y.
Setting thes ensitivit yoftherain sensor #
Press the0078 button toselect theRain Sen-
sor: submenu.
The displa ywill sho wthe cur rent sensitivity
setting. #
Use the0074or0075 button toselect theLow,
Standard orHigh setting.
This setting cont rols ther ain sensor's sensi‐
tivity toprecipitation. This results in thew ind‐
shield wiper swiping mor eorless of tenatt he
same precipitation intensity. #
Press the0078button toconfirm.
The next submenu will be shown on thed is‐
pla y.
% Yo
uc an find fur ther information under "Wind‐
shield wipers" (/ page85).
Selecting thep ermanent displa yfunction
Fo ra ll countrie sexcep tthe United Kingdom:
Using thePermanen tDisplay: function, youc an
swit ch th eheader of thed ispla ybetwe en outside
te mp eratur eand speed (additional speedome ter).
When thed ispla yshows thes peed in theh eader,
th eo utside temp eratur eisshown wit hthe odom‐
et ers.
The additional speedome teru nit in theh eader is
alw ayst he in verseoft he speedome teru nit. #
Press the0078 button toselect thePermanent
Display: submenu.
The displa ywill sho wthe cur rent setting. #
Chang ethe setting bypressing the0074or0075
button. #
Press the0078button toconfirm.
The next submenu will be shown on thed is‐
pla y.
Selecting theu nit of measurement ford is‐
tance
Yo uc an selec twhether thed ispla yshows some
information in miles or kilome ters. #
Press the0078 button toselect theDistance
Unit: submenu.
The displa ywill sho wthe cur rent setting. #
Chang ethe setting bypressing the0074or0075
button. #
Press the0078button toconfirm.
The displa ywills ho wt he next submenu or
the Settings menu again.
The selected unit of measurement ford is‐
ta nce applie stothefollowing displa ys:
R Digital speedome ter
R Totald ista nce and trip di stance
R Trip computer
R Range
R Current consum ption Instrument clus
tera nd on-boar dcomputer 14 3

Fo
rm orei nformation, see "Blind Spot
Assist" (/ page129).
R Ifth es ymbol forL ane Keeping Assist 5
sho wsthel ane marking as abroke nl ine,
Lane Keeping Assis thas been switched
on but is no tready foru se.
Fo rm orei nformation, see "Lane Keeping
Assist" (/ page129).
% In addition,
youc an displ aythee valuatio nof
AT TENTION ASSIS Torthe attention le velin
th es tatus overview( /pag e127). Calling up displa
yson theT ripm enu Displaying
ther ang eand cur rent fuel con‐
sum ption #
Use the0059 or0065 button toselect the
Trip menu. #
Use the0064 or0063 button toselect range
1 and consu mption 2.
App roxima terange 1is de term ined bythec ur‐
re nt driving stylea nd fuel suppl y.Ifth er eiso nlya
small amount of fuel lef tinthe fuel tank ,the dis‐
pla yw ill sho wavehicle being refueled Ï
ins tead of thea ppr oximat erange.
Re cuperation display 3showswhe ther and, if
so, ho wmuchk inetic energy is being con verted
to electric energy while thev ehicle is coasting.
The recuperated energy is then stored in the
st ar terb atter y.Re cuperation display 3is
dependent on thee ngine ins talled and is there‐
fo re nota vailable in all vehicles.
Displaying trip computer "F roms tart" or
"F romr eset" #
Use the0059 or0065 button toselect the
Trip menu. #
Use the0064 or0063 button toselect the
From Start orFrom Reset submenu.
The following values will be displa yed:
R Distance
R Leng thof journey
R Averag efuel consum ption
R Averag espeed
The values in theFrom Start submenurelat eto
th ose measured since thes tart of thej ourne y.
The values in theFrom Reset submenurelat eto
th ose measured since thes ubmenu waslast
re set.
The From Start trip computer will automatically
be rese tu nder thef ollowing conditions:
R The ignition has been switched of ffor longer
th an four hours.
R Atimeof9 99hour shas been exceeded.
R Adista nce of 9999 mi (999 9km) ha sbeen
exc eeded.
The From Reset trip computer will automatically
be rese tu nder thef ollowing conditions:
R Atimeof9 999h our shas been exceeded.
R Adista nce of 99,999 mi (99,999 km) has
been exceeded.
Displaying the digita lspeedome ter #
Use the0059 or0065 button toselect the
Trip menu. #
Select thed igital speedome teru sing
the 0064 or0063 button.
The following will be shown on thed isplay:
R Gearshif trecommendation:
Ve hicles wit hautomatic transmission
R Digital speedome ter
Re setting values
The values of thef ollowing function scan be
re se t:
R Trip dis tance
R "Fro ms tart"t ripc omputer
R "Fro mr eset" trip computer #
Use the0059 or0065 button toselect the
Trip menu. #
Use the0064 or0063 button toselect the
function tobe reset. #
Press the0076 button. Instrument clus
tera nd on-boar dcomputer 14 5