R
Cruise control
R Servic einter vals
Setting thet imea nd da te #
Press the0078button toselect thet ime and
dat edispla y. #
Use the0074or0075 button tosetthe hour sand
press 0078toconfirm. #
Use the0074or0075 button tosetthe minutes
and press 0078toconfirm. #
Use the0074or0075 button tosetthe da yand
press 0078toconfirm. #
Use the0074or0075 button tosetthe mont hand
press 0078toconfirm. #
Use the0074or0075 button tosetthe year and
press 0078toconfirm.
The displa yshows the Settings menu again. Menus and submenus (vehicles with
steer‐
ing-wheel but tons) Service menu
Overview
#
Use the0059 or0065 button toselect the
Service menu.
Depending on thee quipment, youh avet he fol‐
lowing option sinthe Service menu:
R Calling up displa ymessages in them essage
memor y(/pag e235).
R Checking thet irep ressur eelectronicall yor
re startin gthe tir epressur emonitoring sy stem
(/ page209).
R Calling up thes ervice due dat e(ASS YST
PLUS) (/ page175) Assistanc
emenu #
Use the0059 or0065 button toselect the
DriveAssist menu. Depending on
thev ehicle's equipment, youh ave
th ef ollowing options on theDriveAssist menu:
R Displaying thes tatus overview
R Showing thea ssis tant displ ay forActiv eBrake
Assi st (/ pag e113)orA ctiv eDista nce Assi st
DISTRONI C(/pa ge120).
R Swit ching ESP ®
on/of f(/pag e111,112 ).
R Switching ActiveB rake Assi ston/off
(/ page115).
R Setting thes ensitivity of ATTENTION ASSIST
(/ page128)
R Switchin gBlindS potA ssis ton/off
(/ page129)
R Setting thes ensitivity of Lane Keeping Assist
(/ page130)
St atus overview St
atus overview( example)
1 BlindSpotA ssis tswitched on and active
2 Rear wind owwiper swit ched on
3 ATTENTION ASSIS Tswitched on
4 Distance warning function of ActiveB rake
Assi stswitched on
5 Lane Keeping Assis tswitched on and ready
fo ru se #
Use the0064 or0063 button toselect the
ove rview. #
Press the0076 button.
The status overviews hows onlythe symbols
of thed riving sy stems or driving saf etys ys‐
te ms that ha vebeen switched on.
The symbols forB lind Spo tAssis tand Lane
Ke eping Assis tmayvary depending on the
sy stem status:
R Ifth es ymbol forB lind Spo tAssist 1
does no tshowa nyradar waves between
th et wo vehicles, Blind Spo tAssis thas
been switched on but is no tready foru se. 14 4
Instrument clus tera nd on-boar dcomputer
Fo
rm orei nformation, see "Blind Spot
Assist" (/ page129).
R Ifth es ymbol forL ane Keeping Assist 5
sho wsthel ane marking as abroke nl ine,
Lane Keeping Assis thas been switched
on but is no tready foru se.
Fo rm orei nformation, see "Lane Keeping
Assist" (/ page129).
% In addition,
youc an displ aythee valuatio nof
AT TENTION ASSIS Torthe attention le velin
th es tatus overview( /pag e127). Calling up displa
yson theT ripm enu Displaying
ther ang eand cur rent fuel con‐
sum ption #
Use the0059 or0065 button toselect the
Trip menu. #
Use the0064 or0063 button toselect range
1 and consu mption 2.
App roxima terange 1is de term ined bythec ur‐
re nt driving stylea nd fuel suppl y.Ifth er eiso nlya
small amount of fuel lef tinthe fuel tank ,the dis‐
pla yw ill sho wavehicle being refueled Ï
ins tead of thea ppr oximat erange.
Re cuperation display 3showswhe ther and, if
so, ho wmuchk inetic energy is being con verted
to electric energy while thev ehicle is coasting.
The recuperated energy is then stored in the
st ar terb atter y.Re cuperation display 3is
dependent on thee ngine ins talled and is there‐
fo re nota vailable in all vehicles.
Displaying trip computer "F roms tart" or
"F romr eset" #
Use the0059 or0065 button toselect the
Trip menu. #
Use the0064 or0063 button toselect the
From Start orFrom Reset submenu.
The following values will be displa yed:
R Distance
R Leng thof journey
R Averag efuel consum ption
R Averag espeed
The values in theFrom Start submenurelat eto
th ose measured since thes tart of thej ourne y.
The values in theFrom Reset submenurelat eto
th ose measured since thes ubmenu waslast
re set.
The From Start trip computer will automatically
be rese tu nder thef ollowing conditions:
R The ignition has been switched of ffor longer
th an four hours.
R Atimeof9 99hour shas been exceeded.
R Adista nce of 9999 mi (999 9km) ha sbeen
exc eeded.
The From Reset trip computer will automatically
be rese tu nder thef ollowing conditions:
R Atimeof9 999h our shas been exceeded.
R Adista nce of 99,999 mi (99,999 km) has
been exceeded.
Displaying the digita lspeedome ter #
Use the0059 or0065 button toselect the
Trip menu. #
Select thed igital speedome teru sing
the 0064 or0063 button.
The following will be shown on thed isplay:
R Gearshif trecommendation:
Ve hicles wit hautomatic transmission
R Digital speedome ter
Re setting values
The values of thef ollowing function scan be
re se t:
R Trip dis tance
R "Fro ms tart"t ripc omputer
R "Fro mr eset" trip computer #
Use the0059 or0065 button toselect the
Trip menu. #
Use the0064 or0063 button toselect the
function tobe reset. #
Press the0076 button. Instrument clus
tera nd on-boar dcomputer 14 5
#
Use the0064 button toselect Yesand con‐
fi rm withthe 0076 button. Na
vigation menu In
the Navi menu, thed ispla yshows then aviga‐
tion instruction sfromt he audio and/or naviga‐
tion sy stem. Further information on thea udio
and/or navigation sy stem can be found in the
separat eoperating instructions. #
Switc hthe audio and/or navigation sy stem
on (see separat eoperating instructions). #
Use the0059 or0065 button toselect the
Navi menu. #
Press the0076 button toconfirm.
Ro uteg uidanc enotactive 1
Direction of tr avel
2 Name of cur rent road
Ro uteg uidanc eactive No
chang eofd irection announced
1 Distance tothen extd estination
2 Change-of-direction symbol
3 Distance tothen extc hang eofd irection
4 Name of cur rent road Chang
eofdirection announced without lane rec‐
ommendation
1 Road towhic hthe chang eofd irection leads
2 Distance tothec hang eofd irection and dis‐
ta nce indica torg raphic
3 Change-of-direction symbol
If yo un eedtom akeac hang eofd irection ,you
will see adynamic bar as adista nce indica tor
graphic abo vedis tance information 2.
Thi sb arreduces in size from bottom to topas
yo ua pproac hthe announced chang eofd irection.
When thed ista nce indica tornol onger sho ws a
bar ,this means youh ave reached thep oint at
whic hyou ar etoc hangedirection. Chang
eofdirection announced wit hlane recom‐
mendation
1 Road towhic hthe chang eofd irection leads
2 Distance tothec hang eofd irection and dis‐
ta nce indica torg raphic
3 Recommended lane and ne wlaned urin ga
ch ang eofd irection
4 Possible lane
5 Lane no trecommended
6 Change-of-direction symbol
If th ed igital map contains thec orresponding
data, lane recommendations foru pcoming
ch anges of direction can be displa yedint he case
of multi-lane roads. Ne wlane smaybe added dur‐
ing thec hang eofd irection. 14 6
Instrument clus tera nd on-boar dcomputer
Lane no
trecommended 5:inthis lane, youw ill
no tbea bletocomple tethen extc hang eofd irec‐
tio nw ithout changing lane.
Po ssible lane 4:only in this lane will youbea ble
to mak ethe next chang eofd irection.
Re commended lane 3:inthis lane, youw ill be
able tocomple teboth th enextc hang eofd irec‐
tio na nd theo ne af tert hat.
The following additional navigation status dis‐
pla ysarep ossible:
R New Route... orCalculatingRoute...
An ew routeisb eingcalculated.
R Road Not Mapped
The vehicle's position is within thea reaoft he
digital map, but ther oad is no tknown, e.g. it
ma ybeanu npavedr oad.
R No Route
Noroutec oul dbec alculated tothes elected
destination.
R 004B
Youh ave reached thed estination or an inter‐
mediat edestination. Au
dio menu Selecting
aradio station
The statio nisd isplayedw itht he statio nfre‐
qu ency or statio nname. The memor yprese tis
displa yeda long wit hthe frequency band only if
th es tatio nh as been stored. #
Switc hont he audio sy stem and select the
ra dio function (see thes eparat eoperating
instructions). #
Use the0059 or0065 button toselect the
Audio menu.
The displ aywill sho wthe statio ncurrently
selected. #
Toselect astoreds tation: brieflyp ress
the 0064 or0063 button. #
Toselect astatio nfromt hestation lis t:
press and hold the0064 or0063 button.
If no statio nlistisr eceived: #
Toselect astatio nusingthe station
sear chfunction: press and hold the0064 or
0063 button.
Operating data storage media
Depending on them ultimedia sy stem, youc an
pla yb acka udio files from dif fere nt audi osour‐ ces, su
chas an SD card, aUSBstorag edevice or
aB luetooth ®
audio device. #
Swit chon them ultimedia sy stem and select
th ea udio source (see thes eparat eoperating
instructions). #
Use the0059 or0065 button toselect the
Audio menu. #
Toopen thet rack list:press the0064 or
0063 button. #
Toselect then extorp revious trac kon
th et rack list:briefly press the0064 or0063
button. #
Toselect atrack from thet rack listu sing
ra pid sc roll: press and hold the0064 or
0063 button until thed esired tra ckis
re ached.
If yo up ress and hold the0064 or0063 but‐
to n, ther apid scroll speed will increase af ter
as hor ttime. No tall audio sources support
th is function.
If th ec orresponding trac kinformation is stored
on thed atas torage medium, thed ispla ymay
sho wthe following:
R Trac kn umber
R Artis tand/or trac kname
R Folder name
If an extern al audio source has been connec ted
via theA UX connection, no trac kinformation is
displa yed. Te
lephone menu &
WARNING Risk of distraction from infor‐
mation sy stems and communications
equipment
If yo uo perat einformation and communica‐
tio ne quipment integrated in thev ehicle when
driving, youw ill be distracted from thet raffic
situation. This could also cause youtol ose
control of thev ehicle. #
Onlyoperat ethis equipment when the
traf fics ituation permits. #
Ifyo uc anno tbes ureoft his,stop the
ve hicle whils tpaying attention toroad
and traf ficc onditions and ope rate the
equipment wit hthe vehicle stationar y. When using
thep hone, youm usto bse rvet he
legal requirements fort he countr yinwhichyou
ar ec urrently driving. Instrument clu
ster and on-boar dcomputer 147
#
Switc hont he audio sy stem (see thes eparate
operating instructions). #
Switc hont he mobile phone (see thes eparate
operating instruction sfromt he manufac‐
turer). #
Establish aBluetooth ®
connection between
th em obile phone and thea udio sy stem (see
th es eparat eoperating instructions). #
Use the0059 or0065 button toselect the
Telephone menu.
The displa ywill sho wone of thef ollowing
messages:
R The name of them obile phone network
pr ov ider or PhoneREADY:
The mobile phon ehasfound anetwo rk
and is ready toreceive.
R Phone No Service:
No networ kisavailable or them obile
phone is sear ching foran etwo rk.
R Bluetooth ready:
Yo uh aven ot ye testablishe daBluetooth ®
connection between them obile phone
and thea udio sy stem.
Yo uc an obtain fur ther information about suitable
mobile phones and connectin gvia Blue tooth®
:
R AtaM ercedes-Ben zCommercial VanC enter
R OntheI nterne tath ttps://www.mercedes-
benz.com/connect
Ac ceptin gacall #
Press the0061 button on thes teering wheel.
If someone calls youw hen youa reinthe Tele-
phone menu,acorresponding messag ewill
appearont he display.
Re jectin gore ndingac all #
Press the0076 button on thes teering wheel.
Dialing anumber from thet elephone book #
Use the0059 or0065 button toselect the
Telephone menu. #
Press the0064 ,0063 or0076 button to
switc htot hetelephon ebook. #
Use the0064 or0063 button toscroll
th ro ugh then ames.
If yo up ress and hold theb utton forl onger
th an one second ,the names in thet elephone
book will be scrolled thro ugh rapidl y.
or #
Press and hold the0064 or0063 button for
longer than five seconds.
Ra pid scrolling –the name that starts with
th en extlette rort he pr evious letter in the
alphabe tisdisplayed.
Ra pid scrolling will stop when your elease the
button or reac ht he end of thel ist.
If onl yone telephon enumbe risstore df or a
name: #
Press the0061 or0076 button.
Dialing starts.
If se veraltelephone number sarestored fora
name: #
Press the0061 or0076 button.
The phone number swill be displa yed. #
Press the0064 or0063 button toselect a
te lephon enumbe r. #
Press the0061 or0076 button.
Dialing starts. #
Toexitth et elephone book: pressthe0076
or 0038 button.
Re dialing
The on-board compu terw ills ave thel astn ames
or number sdialed in ther edial memor y. #
Use the0059 or0065 button toselect the
Telephone menu. #
Press the0061 button toswitc htot heredial
memor y. #
Press the0064 or0063 button toselect a
name or telephon enumbe r. #
Press the0061 or0076 button.
Dialing starts. #
Toexitth er edial memo ry:press the0076
or 0038 button. Settings menu
Settings
menu (example) 14 8
Instrument clus tera nd on-boar dcomputer
Changing
thea rrangemen tofapplications on
th eh om escreen Yo
uc an cus tomize theh ome screen wit hvarious
widg etsa nd apps and access it at an ytime. #
Press on ©.
The home screen is called up.
Ad ding or changing buttons #
Toassig nana pptoan em ptyb utton:
select an em ptyb utton. #
Tochang eane xisting app: hold downthe
app ico nuntil thea pp tile selection window
appear sonthe home screen. #
Select an app and assign it tother espective
tile. Operating
thet ouchsc reen Ta
pping #
Tapont he displa ytoselect an element.
Single-finger swipe #
Draw or swipe afinger ac ross thed ispla yto
til tortos croll. Calling up applications
The main menu is shown in
them edia display
when yous tart thev ehicle. #
Select thea pplication byswiping and tapping.
or #
In an ydispla y:tapont he© symbol on
th et ouchscreen. #
Select thea pplication byswiping and tapping. Sy
stem settings Configuring basic settings
#
Press on 003B.
The following option sareavailable:
R Connected Devices:O ptions forc ontrolling
connected devices that use Android Auto,
Apple CarPl ay®
or Blue tooth®
tech nology.
R Phone:S etso ptions foru se wit hyour smart‐
phone
R Navigation :Setting options forn avigation and
map interaction
R Notifications:D efines settingsford iffe re nt
notification types
R Displa yand Language :Define ssettings for
displa yand language
R Sound:S etso ption sfor sound and volume
R Time and Units:D efines unitsofmeasure‐
men tused
R About :Displa yssystem information ,end user
license agreement sand advanced settings
Displaying of theE -label wit hconformity
ma rkings and information on legal requ ire‐
ments: #
Press 003B and select Settings*About
* Regulatory . Configuring settings
forc onnected devices #
Press 003B and select Connected Devices .
The following option sareavailable:
R Bluetooth:S etso ptions forc onnecting and
configuri ng device sthat use Blue tooth ®
tech‐
nology
R Android Auto :Setso ptions ford evices that
use theA ndroid Autoapp
R Apple CarPlay :Setso ptions ford evices that
use Apple CarPlay ®
R Bluetoot hName::S etsa nam efor aB lue‐
to oth ®
connection
R Add adevice:S tartst he procedur efor pairing
th em ultimedia sy stem wit hanavailable Blue‐
tooth ®
device Configuring smartphone and
text message
settings #
Press on 003Band select Phone. Multimedia sy
stem 15 3
This could also cause
youtol ose control of
th ev ehicle. #
Onlyoperat ethis equipment when the
traf fics ituation permits. #
Ifyo uc anno tbes ureoft his,stop the
ve hicle whils tpaying attention toroad
and traf ficc onditions and ope rate the
equipment wit hthe vehicle stationar y. Yo
um usto bse rvet he legal requirements fort he
countr yinwhich youa recur rentl yd riving when
ope rating them ultimedia sy stem.
The sear chmenu help stofindthed estination.
The following sear choptions ar eavailable:
R Tosear chall locatio ninformation quickl y,
enter sear chterm s.
R Brow se or sear chexistin gpoint sofi nterest
by catego ry.
R Tofind specific positions, e.g. addresses,
intersections or geographical coordinates,
use sear chfunctions.
R Locatio nsear chwithin thev icinit yofo ther
cities or areas
R Save favo rite s.
R Sear chforp reviousl ydisco veredd estinations
again.
Re sults of thed estination sear ch
The results of thed estination sear chared is‐
pla yedinal ist, withthe neares tlocation at the
to p. Youc an sc roll down tosee mor eresults.
Sear ch to ols
Sear chtools allo wyoutosear chfors pecific loca‐
tion types using prom ptsont he media displa y.
Sear ching fora nd en tering destinations
Fi nding destinations with thes ear chbar
Yo uc an sear chfors pecific locations in the
sear chbar byentering acategor y,brand name,
address or location name. #
Select ªonthem ap. #
Select Keyword or Address inthes ear chbar. #
Ente rall or par tofthe sear chterm.
Sug gested sear chterm sa redispla yedb elow
th es ear chbar. The
following option sareavailable:
R Tosear chforana ddress near you, enter the
st re et and house number.
R Tosear chforana ddress in ano ther city ,enter
th es treet, hous enumber ,citya nd stat eor
pr ov ince.
R Tosear chforac ity,e nter thec ity and the
st at eorp rovince.
R Tosear chfors pecific coordinates, enter the
latitude and longitude.
R Tosear chfors pecific businesses, enter the
appropriat ecategor y,e.g. cinemas.
R Tosear chforab usiness wit haspecific name,
enter all or par tofthe name #
Select one of thef ollowing options. #
Tosear chforo ne of thes ugges teds ear ch
te rm s, select thec orresponding term.
or #
Press Donefort he entered term ss ear ched
fo r. #
Select adestination if necessar y.
Changing thes ear charea #
Select ªonthem ap. #
Select å. #
Select one of thea vailable options.
Sear ching forana ddress
Depending on thea vailable map material, the
sequence of steps can be dif fere nt. #
Select ªonthem ap. #
Select åif it is necessar ytochangethe
sear charea. #
Select Address. #
Followt he instructions on them edia display
to enter thea ddress information. #
Select thea ddress.
Sear ching forac ity
Befor eyou can sear chforac ity,you mus tadd
th e" Cities" shortcut tothes ear chmenu. #
Select ªonthem ap. #
Select Cities. #
Select one of thef ollowing options. #
Select acityf romt he list.
or #
Enter then ame of thec ity youa relooking for
and press Done. 15 6
Multimedia sy stem
Select one of
thef ollowing options:
R Detour by Distance:A voids arout efor ac er‐
ta in dis tance.
R Route detoured.:A voids aparticular road on
th er oute.
R Detour:C alculatesacomple tely ne wr oute.
Editing arout ew ith intermediat edestina‐
tions
Requ irements
R Arout ehas already been star ted
( / pag e158).
Yo uc an add intermediat edestinations in them id‐
dle or at thee nd of your route. #
Select ªonthem ap. #
Sear chforap osition. #
Select aposition. #
Press on Go!.
Select one of thef ollowing options:
R Add as Next Stop:S etst he location as the
next intermedia tedestination on ther oute.
R Add as Last Stop:A ddsthel ocation at the
end of ther oute.
R Add to ActiveR oute:Addsthel ocation and
manages theo rder of destinations on the
ro ute.
The navigatio nsystem adds this position tothe
ro ute. The routeisr ecalculated wit hthe individ‐
ua ld estinations in thed esired order.
Planning routes with myTrips
Wi th th e"my Trips" function youc an se tand sa ve
ar oute. This can useful fort he planning of a
deliver yroute, aholid ayorajourne y.Yo uc an
manag easavedroute, e.g. torearrang ep osi‐
tions ,optimize theo rder of thes tops or add posi‐
tions.
Ar out ecan include man ydestinations but must
ha ve at leas tone star tlocatio nand one destina‐
tion. The star tlocatio nisplace from wher eyou
wish toseto ffon your journe y.Ifyo us tart navi‐
ga tio nfor thet ripf roma nother location ,the mul‐
timedia sy stem of fers theo ption of driving tothis
location firs t. Fo rar ound-trip, thes tart and desti‐
nation locatio ncan be thes ame.
Setting aroute #
Select ª*myTrips *Create Trip on
th em ap. #
Select Add Starting Point. #
Select aposition fort he startin gpoint. #
Select Add Destinations. #
Setap osition fort he destination and select
with Select. #
Ifre qu ired, add mor edestination sfor other
positions and then select e. #
Select Trip Settings *Trip Name . #
Ente rthe name of ther out eand select Done.
Managing and rearra nging positions on a
ro ute #
Select ª*myTrips onthem ap. #
Select asave droute. #
Select Edit Destinations. #
Select one of thef ollowing options: #
Using theg ripn exttoi t, drag thed estination
to an ew position on ther oute.
or #
Select an additi onal locationwithAdd Desti-
nations.
Deletin groutes #
Select ª*myTrips *Delete Trips on
th em ap. #
Select one or mor eroutes. #
Select Delete. Showing traf
fici nformation Re
al-time traf ficd ataisano ptional featur efor
yo ur vehicle. Contact your vehicle dealer form ore
information on traf ficf unctions. Traf fici nforma‐
tion is no tavailable in all areas.
% Daimler
AGand Garmin ar enotresponsible
fo rt he accuracy and timeliness of tra ffic
information.
Displaying traf fica head #
Select æ*Traffic .
Displ aying thet raffic map #
Select æ*Traffic *Traffic Map.
Displaying thet raffic legends #
Select æ*Traffic *Traffic Map *
þ *Traffic Legend. 16 0
Multimedia sy stem