Low
Low
er
ering t
ing t he v
he vehicle (v
ehicle (v ehicles wit
ehicles wit h
hO.-r
O.-r oad
oad pack-
pac k-
ag
ag e)
e) #
Pull rock er switch 1.
R O.- road le vel +3: theve hicle is lo weredto
o.-road le vel +2. Two indicator lamps 2
light up continuously when theve hicle has
/nished lo wering.
R O.-road le vel +2: theve hicle is lo weredto
o.-road le vel +1. One indicator lamp 2
lights up continuously when theve hicle
has /nished lo wering.
R O.-road le vel +1: theve hicle is lo weredto
th e normal le vel. No indicator lamp 2
lights up when theve hicle has /nished
lo we ring.
Yo ur selection is sa ved. The o.- road le vel set
re mains stored even aTer the ignition has been
switched o..
Se
Se tting tting O.-r
O.-road
oadAssist
Assist
R
R eq
eq uir
uir ements:
ements:
R theve hicle is stationar y.
R theve hicle is set too.-road le vel 1 or 2 R
the O.- road or O.-road Plus (only vehicles
with O.-road pac kage ) drive prog ram has
been selected
R the ignition is switched on
R all doors and the bonnet are closed
R the transmission is not engaged in position j
R there is no trailer coupled
R theve hicle is outdoors
R the de tected lateral inclination of theve hicle
must not exceed appr ox. 15°
R the system is within its operating temp erature
R the on-board voltage is su1ciently high
Multimedia system: 4 © 5
Settings 5
Assistance
5 Offroad Assist
R
R ecov
ecov er
ery mode
y mode
Re covery mode assists the driver when pulling
awa y on rough terrain, such as sand or sno w. #
Select Free driving mode . #
Select Start.
Re covery mode is activated. #
Select Stoptostop reco very mode.
Re covery mode is automatically deactivated in the
fo llowing situations:
R you are actually tr avelling faster than 15 km/h
R aTer a running time of 30 seconds
R it is de tected that an object has hit the under-
body of theve hicle hard
R not all conditions are met
% Further information on reco very mode
(/ page 276).
Individual wheel contr Individual wheel contr ol ol
Individual wheel control enables theve hicle le vel
to be set separately for each wheel. #
Select Individual wheel control . #
Set theve hicle le velfo rth e desired wheel.
% You can also use theto uchscreen toset the
le ve lfo r two or more wheels at the same
time. #
Select Resettoset all wheels tothe default
setting. 280
280
Driving and parking
ular
the data pr otection regulations, in your
countr y.
Fo rth is reason, before using the dashcam
inform yourself about there gulation de tails for
th ere specti vecount ry.
This function is not permitted in all countries. #
Obser vethe count ry-speci/c regula-
tions. Selecting a USB de
Selecting a USB de
vice f
vice for a video r
or a video r ecor
ecording with
ding with
t
t he dashcam
he dashcam R
R
eq
eq uir
uir ements:
ements:
R Atleast one USB device is connected with the
multimedia system .
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam #
Select the USB device.
% When USB devices contain multiple partitions,
re corded video /les are not alw ays displa yed
in there cording list. Mercedes-Benz
recommends that you use
USB devices with one partition. S
S
t
tar
ar ting or st
ting or st opping video r
opping video r ecor
ecording wit
ding wit h t
h the
he
dashcam
dashcam R
R
eq
eq uir
uir ements:
ements:
R A USB device is connected with the multime-
dia system .
R The vehicle is switched on.
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam #
If se veral USB devices are connected with the
multimedia system, select a USB device
(/ page 336). #
Select theIndividual recording orLoop
recording recording mode.
If Individual recording is selected andthe
memory is full there cording stops.
If Loop recording has been selected, se veral
short video /les are recorded. When the mem-
ory limit is reached, the oldest video /le is dele
ted and recording is continued automati-
call y. #
T
To st
o st art
art::select Start recording.
The length of there cording is shown. The
Please do not remove the storage medium.
message appears. The video /le is stored on
th e USB device. #
T To end:
o end: selectEnd recording .
A report may appear in thefo llowing cases:
R Forth eIndividual recording recording mode:
th e memory is full or there are only a few
minutes recording time available. The video
re cording stops or will be stopped imminent ly.
Change the USB device or dele tea video /le.
R If a video recording has star ted and a national
border is de tected, theNational border
crossed. Please observe the countryspecific
regulations regarding video recording. mes-
sage appears.
This function is not available in all countries.
R The camera is not functional, theCamera
unavailable message appears. 336 336
MBUX multimedia system
%
Websites cannot be shown while theve hicle is
in motion. Ov
Ov
er
ervie
vie w of smar
w of smar tphone int
tphone int egr
egration
ation Wi
th Sma rtphone Integ ration, you can use cer tain
functions on your mobile phone via the multime-
dia system displa y.
Only one mobile phone at a time can be connec-
te d via Smartphone Integ ration tothe multimedia
system. Also for use with two phone mode with
smartphone integ ration, only one additional
mobile phone can be connec ted using Blue tooth ®
with the multimedia system.
The full range of functions for Smartphone Inte-
gr ation is only possible with an Internet connec-
tion. The appropriate application must be down-
loaded on the mobile phone touse Smartphone
Integ ration. The mobile phone must be switched
on and connec tedto a USB port with theç
symbol on the multimedia system using a suitable
cable.
Apps for Smartphone Integ ration
R Apple CarPlay ® R
Android Auto
% For saf etyre asons, the /rst activation of
Smartphone Integ ration on the multimedia
system must be car ried out when theve hicle
is stationary and the parking brake is applied.
Yo u can start Apple CarPlay ®
or Android Auto
from the device manager.
% Mercedes-Benz recommends disconnecting
th e connecting cable only when theve hicle is
stationar y.
Ov
Ov er ervie
vie w of tr
w of tr ansf
ansferr
erred v
ed v ehicle data
ehicle data
When using Smartphone Integ ration, cer tain vehi-
cle data is transfer redto the mobile phone. This
enables youto get the best out of selected mobile
phone services. Vehicle data is not directly acces-
sible.
The following system information is transmitted:
R SoTware release of the multimedia system
R System ID (anonymised)
The transfer of this data is used tooptimise com-
munication between theve hicle and the mobile
phone. To
do this, and toassign se veralve hicles tothe
mobile phone, a vehicle identi/er is random lyge n-
erated.
This has no connection totheve hicle identi/ca-
tion number (VIN) and is dele ted when the multi-
media system is reset (/ page 328).
The following driving status data is transmitted:
R Transmission position engaged
R Distinction between par ked, standstill, rolling
and driving
R Day/night mode of the inst rument clus ter
R Drive type
The transfer of this data is used toalter how con-
te nt is displa yedto cor respond tothe driving sit-
uation.
The following position data is transmitted:
R Coordinates
R Speed
R Compass direction
R Acceleration direction 348 348
MBUX multimedia system
Fo
r accident clari/cation purposes, thefo llowing
measures can be take n up toan hour aTer the
emer gency call has been initia ted:
R The cur rent vehicle position can be de ter-
mined.
R Avo ice connection totheve hicle occupants
can be es tablished.
R Emer gency call data can be called up.
% ForRu ssia: various functions, e.g. receiving
tra1c information, cannot be per form ed for
up totwo hours aTer sending an emer gency
call. Self diagnosis function of t
Self diagnosis function of t
he emerg
he emerg ency call sy
ency call sy s-
s-
t
t em
em Yo
ur car veri/es the operability of the emer gency
call system each time theve hicle is ON. In case of
system failure, you will be informed with text mes-
sage on the inst rument clus ter and with red indi-
cator SOS NOT READY on the displa y.
Please, ma kesure, that during 30 seconds aTer
switching vehicle ON there d indicator SOS NOT
READY in the upper right corner of display is switched OFF,
this means the emer gency call sys-
te m passed diagnostics successfull y. S
S
t
tar
ar ting/ending ERA
ting/ending ERA -GL
-GLON
ONASS t
ASS t es
est mode
t mode R
R
eq
eq uir
uir ements:
ements:
R The star ter battery is su1ciently charge d.
R The vehicle is switched on.
R The vehicle has been stationary for at least
one minute.
% The test mode is cu rrently available in thefo l-
lowing countries, forex ample:
R Russia
R Belarus
R Kazakhstan
R Armenia
R Kyrgyzs tan #
T
To st
o st ar
art t
t t he t
he t es
est mode:t mode: press and hold the
~ button on the multifunction steering
wheel for at least /ve seconds.
The test mode is star ted and automatically
ends aTer the language test has been pe r-
fo rm ed. #
T
To st
o st op manual t
op manual t es
est mode:t mode: switch o. theve hi-
cle.
The test mode is ended. Inf Inf
or
ormation on dat
mation on dat a pr
a processingocessing Pr
Processing of per
ocessing of per sonal dat
sonal data via t
a via the Mer
he Mercedes- cedes-
Benz emerg
Benz emerg ency call sy st
enc y call sy stem
em
All processing of pe rsonal data via the Mercedes-
Benz emer gency call system cor responds with the
speci/cations in the EU Regulation 2016/679 "on
th e pr otection of individuals with rega rd tothe
processing of personal data (GDPR)".
The data is solely used bythe Mercedes-Benz
emer gency call system forre scue and reco very in
th eev ent of an accident.
The owner of a vehicle, that is equipped with a
Mercedes-Benz emer gency call system in addition
to the 112 emer gency call system (EU eCall), has 354 354
MBUX multimedia system
#
Ensure there is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The 360° Camera or there ve rsing camera is
switched o..
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The outside mir rors are folded in.
R The blo werfo rth eve ntilation/heating is
switched o..
R The windsc reen wiper switch is in position g.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise theta ilgate could
open unintentionall y. R
In automatic car washes with con veyo r sys-
te ms:
- Neutral iis engaged.
- Ifyo uwo uld like tolea vetheve hicle while
it is being washed, make sure theke y is
located in theve hicle. The park position
j isotherwise automatically engaged.
% Toprev ent damage tothe tyres and wheels,
drive straight and in tothe centre of the guide
ra ils of the car wash.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise.
A A ut ut omatic car w
omatic car w ash mode
ash mode
In car wash mode, theve hicle is prepared for driv-
ing into the automatic car wash. Car wash mode
can be activated at a speed of up to20 km/h
Ac tivate (/ page 373).
The following settings are made when car wash
mode is activated:
R The outside mir rors are folded in. R
Topreve ntthe windscreen washer system
from starting up automaticall y,thera in sensor
is deactivated.
R The rear wind owwiper is deacti vated.
R The windo wsand the sliding sunroof are
closed.
R Mer
Mer cedes-Ma
cedes-Ma ybac
ybach v
h vehicles:
ehicles: theru nning
boa rds are retracted.
R The air conditioning system is set toair-recir-
culation mode.
R Parking Assist PARKTRONIC is deactivated.
R V
Vehicles wit
ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
activated aTer appr ox. eight seconds.
R V
Vehicles wit
ehicles wit h AIRMA
h AIRMATIC:
TIC:theve hicle is raised
to the maximum possible chassis
le ve l(/ page 269).
If rising take s lon gerth an 25 seconds, thefo l-
lowing message appears onthe multifunction
displa y:
Preparation for car wash incomplete See
media display . ATer some time, theve hicle
automatically continues rising. 372 372
Main
tenance and ca re
R
V
Vehicles wit
ehicles wit h E-A
h E-ACTIVE BOD
CTIVE BOD Y C
Y CONTR
ONTR OL:
OL:the
ve hicle is raised tothe maximum possible
ch assis le vel(/ page 277).
If rising take s lon gerth an 25 seconds, thefo l-
lowing message appears onthe multifunction
display:
Preparation for car wash incomplete See
media display . ATer some time, theve hicle
automatically continues rising.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
Ab ove a speed of 20 km/h Car wash mode is
automatically deacti vated.
The following settings are reset when car wash
mode is deacti vated:
R The outside mir rors are folded out.
R The rain sensor is activated.
R The rear wind owwiper is activated.
R The air conditioning system is set tofresh air
mode. R
Parking Assist PARKTRONIC is reset tothe
pr ev iously selected setting.
R The windo wsand the sliding sunroof remain
closed.
R Mer
Mer cedes-Ma cedes-Ma ybac
ybach v
h vehicles:
ehicles: theru nning
boa rdsre main retracted.
R V
Vehicles wit
ehicles wit h 360° Camer
h 360° Camer a:
a:the front image is
deactivated at speeds abo ve18 km/h.
R V
Vehicles wit
ehicles wit h AIRMA
h AIRMATIC:
TIC:theve hicle is lo wered
to the pr eviously set chassis le vel.
R V
Vehicles wit
ehicles wit h E-A
h E-ACTIVE BOD
CTIVE BOD Y C
Y CONTR
ONTR OL:
OL:the
ve hicle is lo weredto the pr eviously set chassis
le ve l. A
A ctiv
ctiv ating/deactiv
ating/deactiv ating aut
ating automatic car w
omatic car w ash mode
ash mode R
R eq
eq uir
uir ements:
ements:
R theve hicle is stationar y.
R the engine is running. Multimedia system:
4 © 5
Settings 5
Quick access
A
A ctiv
ctiv ating aut
ating aut omatic car w
omatic car w ash mode
ash mode #
Select Car wash mode . #
Select Start.
If one of the settings cannot be selected, this is
displa yedby a% behind there specti veset-
ting.
% For an overview of the settings made when
activating automatic car wash mode
(/ page 371).
Deactiv
Deactiv ating aut ating aut omatic car w
omatic car w ash mode
ash mode #
Select Stop.
The automatic car wash settings are reset.
% The automatic car wash mode is automatically
deacti vated as soon as a speed of 20 km/h is
ex ceeded. Main
tenance and ca re
373
373
Wi
th MOEx tended tyres (run-0at tyres), you can
continue todrive your vehicle even if there is a
to ta l loss of pressure in one or more tyres. Ho w-
ev er, the tyre a.ected must not show any clear ly
visible damage.
Yo u can recognise MOExtended tyres bythe
MOEx tended ma rking which appears on the side
wa ll of the tyre.
V
V ehicles wit ehicles wit h tyr
h tyr e pr
e pressur
essur e monit
e monit or
oring sy
ing sy st
stem:
em:
MOExtended tyres may only be used in conjunc-
tion with an activated tyre pressure monitoring
system.
If a pressure loss warning message appears inthe
driver's displa y,proceed as follo ws:
R Check the tyre for damage.
R If driving on, obser vethefo llowing no tes. Dr
Dr iving dist iving dist ance possible in emerg
ance possible in emerg ency mode
ency mode
aTer
aTer t
the pr
he pr essur
essur e loss w
e loss w ar
arning:
ning: Load condition
Load condition
Dr
Driving dist
iving dist ance possi-
ance possi-
ble in emerg
ble in emerg ency mode
ency mode
Pa rtially laden 80 km
Fu lly laden 30 km The driving distance possible in emer
gency mode
may vary depending on the driving style. Obser ve
th e maximum permissible speed of 80 km/h.
If a tyre has gone 0at and cannot be replaced with
an MOExtended tyre, you can use a standard tyre
as a temp orary measure. S
S
t
tor
or ag
ag e location of t
e location of t he TIREFIT kit (no
he TIREFIT kit (no t plug-in
t plug-in
h
h ybr
ybr id)
id) The TIREFIT kit is located under
the load compart-
ment 0oor. Example: TIREFIT kit
1
Tyre sealant bottle
2 Tyre in0ation compressor
Depending on the model, the TIREFIT kit may also
be located in other places under the load com-
partment 0oor.
% You can /nd information on the po wer cate-
gory (LK) and/or electrical data on the back
of the tyre in0ation compressor:
R LK3 – 12 V/20 A,240 W,1 kg Breakdown assistance
383 383
Fo
r tyres, pay attention tothefo llowing:
R Designation
R Manufacturer
R Type &
W
WARNING
ARNING Risk of inju rythro ugh exceed-
ing the speci/ed tyre load-bearing capa-
city or the permissible speed rating
Exceeding the load-bearing capacity of the
tyres can lead totyre damage and could cause
th e tyres toexplode. #
Therefore, only use tyre types and sizes
appr ovedfo ryo ur vehicle model. #
Obser vethe tyre load-bearing capacity
ra ting and speed rating requ ired foryo ur
ve hicle. *
N NOOTE
TE Vehicle and tyre damage thro ugh
tyre types and sizes that ha venot been
app roved Fo
r saf etyre asons, only use tyres, wheels and
accessories which ha vebeen specially
appr oved byMercedes-Benz foryo ur vehicle.
These tyres are special lyadap tedto the active
saf ety sy stems, su chas ABS, ESP ®
and
4MATIC, and mar ked as follo ws:
R MO = Mercedes-Benz Original
R MOE = Mercedes-Benz Original Ex tended
(run-0at tyres only for cer tain wheels)
R MO1 = Mercedes-Benz Original (only cer-
ta in AMG tyres)
Otherwise, cer tain properties, such as han-
dling characteristics, vehicle noise emissions,
consu mption, etc. could be adversely a.ec-
te d. Furthermore, other tyre sizes could result
in the tyres rubbing against the body and axle
components when loaded. This could result in
damage tothe tyre or theve hicle. Only use tyres, wheels and accessories
that
ha ve been checked and recommended by
Mercedes-Benz. *
N
NOOTE
TE Risk todriving saf ety from retrea-
ded tyres Re
treaded tyres are neither tested nor recom-
mended byMercedes-Benz, since pr evious
damage cannot alw ays be de tected on retrea-
ded tyres.
Fo rth is reason driving saf ety cann otbe guar-
anteed. #
Do not use used tyres if you ha veno
information about their pr evious usage. *
N NOOTE
TE Possible wheel and tyre damage
when driving over obstacles Lar
gewheels ha vea smaller section width. As
th e section width decreases, therisk of
wheels and tyres being damaged when driving
ov er obstacles increases. Wheels and tyres
405 405