2021 MERCEDES-BENZ EQA SUV maintenance

Then,
you can select a service and be connected
to a specialist at the Mercedes-Benz Customer
Centre.
Calling t
Calling t he Mer he Mercedes-Benz Cust
cedes-Benz Cust omer Centr
omer Centre
eaTer
aTer
aut
aut omatic accident or br
omatic accident or br eakdo
eakdown det
wn det ection
ection
R
R eq
eq uir
uir ements:
ements:
R The vehicle has de tected an accident or break-
down situation.
R The vehicle is stationar y.
R The hazard warning lights are switched on.
% This function is not available in all countries.
The vehicle can de tect accident or breakdown sit-
uations under cer tain circumstances.
In theev ent an accident or breakdown is de tec-
te d, the emer gency guide sh ows saf ety no tes in
th e multimedia system displa y.
ATer quitting the emer gency guide display on the
multimedia system, a prom ptappears asking
whe ther youwo uld like toget support from the
Mercedes-Benz Customer Centre. #
Select Call.
R ATer your ag reement, or if the Mercedes
me connect service "Accident and Break-
down Management" is active, theve hicle
data is transfer red automatically
(/ page 281).
R The Mercedes-Benz Customer Centre
ta ke syo ur call and or ganises the break-
down and accident assistance.
Yo u may be charge dfo rth ese services.
% Depending on the se verity of the accident, an
automatic emer gency call can be initia ted.
This has priority over all other active calls.
% In addition, if the Mercedes me connect
service "Telediagnostics" is active, a similar
prom ptcan appear aTer a delay in theev ent
of a breakdown. If you are already in contact
with the Mercedes-Benz Customer Centre or
ha ve already received support, this prom pt
can be ignored or declined.
% Ifyo u answer the prom ptfor support from the
Mercedes-Benz Customer Centre with Later,
th e message will be hidden and appear again
later. The prom
pttriggered bythe Mercedes me
connect service "Telediagnostics", can either
be con/ rmed or declined. ATer being
declined, this will not be shown again.
Arr Arr anging a ser
anging a ser vice appointment via a Mer
vice appointment via a Mer cedes
cedes
me call
me call
If yo u ha veactivated the maintenance manage-
ment service, releva nt vehicle data is transfer red
automatically tothe Mercedes-Benz Customer
Centre. You will then receive individual recom-
mendations rega rding the maintenance of your
ve hicle.
Re gardless of whe ther you ha veconsen tedto the
maintenance management service, the multime-
dia system reminds you aTer a cer tain amount of
time that a service is due. A prom ptappears ask-
ing if youwo uld like tomake an appointment. #
T To arr
o arr ang
ange a ser
e a ser vice appointment
vice appointment: :select Call.
ATer your ag reement, theve hicle data is
transfer red and the Mercedes-Benz customer
centre take syo ur prefer red appointment date.
The information is then sent toyour desired
service outlet. 278
278
MBUX multimedia system

This will contact
youto con/rm the appoint-
ment and if necessary consult about the
de tails.
% Ifyo u select LateraTerthe service message
appears, the message is hidden and reap-
pears at a later time.
Giving consent t
Giving consent t o dat
o data tr
a transf
ansf er dur
er dur ing a Mer
ing a Mer cedes
cedes
me call
me call
R R eq
eq uir
uir ements:
ements:
R There is an active Mercedes me call via the
multimedia system or the me button in the
ove rhead control panel (/ page 276).
% The prom pttocon/rm data transfer does not
appear in all count ries.
If th eAc cident and Breakdown Management ser v-
ices are not activated on Mercedes me, theDo
you want to transmit vehicle data and the vehi-
cle's position to the Mercedes-Benz Customer
Centre in order to improve the processing of
your request? message is shown. #
Select Yes.
Re leva nt identi/cation data is transmitted
automaticall y. More information on Mercedes me: https://
ww w.mercedes.me
T T r
ransf
ansf err
erred dat
ed dat a dur
a during a Mer
ing a Mer cedes me call
cedes me call
When you make a service call via Mercedes me,
data is transmitted. This enables targ eted advice
and a smoo thservice.
The following requ irements must be ful/lled for
th e transfer of the data:
R The vehicle is switched on.
R The required da tatransfer tech nology is sup-
por tedby the mobile phone network pr ovider.
R The quality of the mobile connection is su1-
cient.
Multi-s tage transfer depends on thefo llowing fac-
to rs:
R Reason forth e initiation of the call
R The available mobile phone transmission tech-
nology.
R The activated Mercedes me connect services.
R The service selected in thevo ice control sys-
te m. %
A prom ptfor consent tothe data transmission
only occurs if the cor responding Mercedes
me connect service is not activated.
Dat
Dat a tr
a transf
ansf er if Mer
er if Mer cedes me connect ser
cedes me connect ser vices
vices
ar
ar e no
e no t activ
t activ at
ated
ed
If no Mercedes me connect services are activated
and the data pr otection prom pthas been con-
/rmed thefo llowing data is transmitted:
R Vehicle identi/cation number
R Time of the call
R Reason forth e initiation of the call
R Con/ rmation of the data pr otection prompt
R Country indicator of theve hicle
R Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle
If a call is made for a service appointment via the
service reminder, thefo llowing data is also trans-
mitted:
R Current mileage and maintenance data MBUX multimedia system
279
279

If a call is made aTer automatic accident or break-
down de
tection using the multimedia system, the
fo llowing data is also transmitted:
R Current mileage and maintenance data
R Current vehicle location
If Ac cident and Breakdown Management is called
via thevo ice control system and no service has
been activated, but the data pr otection query has
been con/ rmed, thefo llowing data can also be
called up from theve hicle bythe Mercedes-Benz
Customer Centre:
R Current vehicle location
If th e data pr otection prom pthas been rejec ted,
th efo llowing data is transmitted toenable targe-
te d advice and an e1cient service:
R Reason forth e initiation of the call
R Rejection of the data pr otection prompt
R Country indicator of theve hicle
R Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle Dat
Dat a tr a transf
ansf er if Mer
er if Mer cedes me connect ser
cedes me connect ser vices
vices
ar
ar e activ
e activ at
ated
ed
Only if there specti veservice is activated will
additional incident-speci/c data be transmit ted in
th e second stage toenable an optimal service.
An ove rview of the data transmitted can be found
in there specti veterm s of use for Mercedes me
connect services. These can be obtained in the
Mercedes me por tal: https://
me.secure.mercedes-benz.com
Dat Dat a pr
a pr ocessing
ocessing
The data transmitted within the scope of the call
is dele ted from the processing system aTer the
call is /nished, in so far as this data is not being
used forot her activated Mercedes me connect
services.
The incident-speci/c data is processed and stored
in the Mercedes-Benz Customer Centre and, if
re qu ired toprocess the incident, forw arded tothe
service partner authorised bythe Mercedes-Benz
Customer Centre. Please take note of the data
pr otection information on the Mercedes me Inter-
net page https://www.mercedes.me or in there
corded message immediately aTer calling the
Mercedes-Benz Customer Centre.
% The recorded message is not available in
ev ery countr y. Mer Mer
cedes me connect
cedes me connect Inf
Inf
or
ormation on Mer
mation on Mer cedes me connect
cedes me connect
% Mercedes me connect or individual Mercedes
me connect services are not available in every
countr y.Find out at a Mercedes-Benz service
centre if these functions are available in your
countr y.
Mercedes me connect consists of multiple ser v-
ices.
Yo u can use thefo llowing services via the multi-
media system and theove rhead control panel, for
ex ample:
R Accident and Breakdown Management (me
button or situation-dependent display in the
multimedia system)
R Mercedes-Benz emer gency call system (auto-
matic eme rgency call and SOS button) 280 280
MBUX multimedia system

ASS
YS
ASS YST PL
T PL US ser
US ser vice int
vice int erv
erval display
al display F
F
unction of t
unction of t he ASSYS
he AS SYST PL
T PL US ser
US ser vice int
vice int erv
erval dis-
al dis-
play
play The ASS
YST PLUS service inter val display on the
inst rument display informs you of the next regular
service due date.
Depending on the operating conditions of the
ve hicle, there maining time or distance until the
next service due date will be displa yed.
Yo u can hide this service display using the back
button Gonthe leT-hand side of the steering
wheel.
Yo u can obtain information concerning the servic-
ing of your vehicle from a quali/ed specialist
wo rkshop, e.g. a Mercedes-Benz service cent re.Displa Displa
ying t
ying the ser
he ser vice due date
vice due date On-board computer:
4 Service 5
ASSYST PLUS
The next service due date is displa yed. #
T
T o e
o e xit t
xit t he displa y:
he displ ay:press the back button
G onthe leT-hand side of the steering
wheel.
Bear in mind thefo llowing related topic:
R Operating the on-board computer
(/ page 246). Inf
Inf
or
ormation on r
mation on r egular maint
egular maint enance w
enance work
ork *
N
NOOTE
TE Premature wearthro ugh failure to
obser veservice due dates Main
tenance workwhich is not car ried out at
th eright time or inco mplete ly can lead to
increased wear and damage totheve hicle. #
Adhere tothe prescribed service inter-
va ls. #
Always ha vethe prescribed maintenance
wo rkcar ried out at a quali/ed specialist
wo rkshop. *
N
NOOTE
TE Irre parable damage tothe high-volt-
age battery due tomaintenance worknot
being ca rried out The high-voltage battery is subject
towe ar.
Main tenance workwhich is not car ried out in
time can lead toirre parable damage tothe
high- voltage batter y. #
Always obser vethewa rning messages
about the high-voltage battery and
immediately consult a quali/ed specialist
wo rkshop. #
Have the necessary maintenance work
on the high-voltage battery car ried out at
a qu ali/ed specialist workshop. N
No
ot
tes on special ser
es on special ser vice r
vice req
equir
uir ements
ements The prescribed service inter
val is based on nor-
mal operation of theve hicle. Main tenance work
will need tobe per form ed more oTen than speci-
/ed if theve hicle is operated under arduous con-
ditions or increased loads. This is the case for fre-
qu ent operation in mountainous terrain or on poor
ro ad sur faces, forex ample. 298
298
Main
tenance and ca re

In
these or similar operating conditions, ha vethe
interior air /lter changed more frequentl y.The
tyres must be checked more frequently if theve hi-
cle is operated under increased loads. Further
information can be obtained at a quali/ed special-
ist workshop.
The AS SYST PLUS service inter val display is only
an aid. The driver of theve hicle bears responsibil-
ity as rega rdsto whe ther maintenance work
needs tobe per form ed more oTen than speci/ed
based on the actual operating conditions and/or
loads. Batt
Batt
er
ery disconnection per
y disconnection per iods
iodsThe ASS
YST PLUS service inter val display can cal-
culate the service due date only when the battery
is connected. #
Display and no tedown the service due date
on the inst rument display before disconnect-
ing the battery (/ page 298). Engine com
Engine com
par
partment
tment A
A
ctiv
ctiv e bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otection)
ection) Oper
Oper
ation of t
ation of t he activ
he active bonne
e bonne t (pedes
t (pedestr trian pr ot
ian pr otec-
ec-
tion)
tion)
In cer tain accident situations, the actuation of the
active bonnet reduces therisk of injury topedes-
trians. The rear area of the bonnet is raised by
appr oximately 70 mm.
Fo rth e drive tothewo rkshop, reset the actuated
active bonnet yourself (/ page 299).
ATer the active bonnet has been actuated, pedes-
trian pr otection may be limited.
Ha ve the full functionality of the active bonnet
re stored in a quali/ed specialist workshop.
R
R ese ese tting t
tting t he activ
he activ e bonnet
e bonnet &
W
WARNING
ARNING Risk of burns from hot compo-
nents in the engine compartment
Cer tain components in the engine compart-
ment can be very hot, e.g. the drive system
and the cooler. #
Allow the drive system tocool down and
to uch only the components described
belo w. #
With your hand 0at, push down active bonnet
1 inthe area around the hinges on bo th
sides (ar rows ).
In doing so, the actuator is depressurised and
yo u may hear a hissing sound.
The engine bonnet must engage in position. #
If active bonnet 1can be raised slightly at
th ere ar in the area of the hinges, repeat the
step until it engages co rrectl y. Maintenance and ca
re
299
299

Opening and closing t
Opening and closing t
he bonnet
he bonnet&
W
WARNING
ARNING Risk of accident due todriving
with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine
bonnet is loc ked. &
W
WARNING
ARNING Risk of accident and inju ry
when opening and closing the bonnet
The bonnet may suddenly drop into the end
position.
There is a risk of injury for an yone in the
engine bonnet's range of mo vement. #
Do not open or close the bonnet if there
is a person in the bonnet's range of
mo vement. &
W WARNING
ARNING Risk of injury due tooverheated
ve hicle
If yo u open the bonnet in theev ent of an over-
heated vehicle or /re in the engine compart-
ment, thefo llowing situations may occur:
R You may come into contact with hot gases.
R You may come into contact with other
escaping hot operating 0uids. #
Intheev ent of overheating or /re in the
engine compartment, keep the bonnet
closed and call the /re service. #
Allow theov erheated vehicle tocool
down /r stifyo u need toopen the bon-
net. &
W
WARNING
ARNING Risk of injury due tomoving
parts
Components in the engine compartment may
continue torun or start unexpectedly even
when the drive system is switched o.. Obser
vethefo llowing if you must open the
bonnet: #
Switch o. theve hicle. #
Neverto uch the danger zones sur round-
ing moving components, e.g. thero tation
area of thefa n. #
Remo vejewe llery and watches. #
Keep items of clo thing and hair away
from moving pa rts. &
W
WARNING
ARNING Risk of burns from hot compo-
nents in the engine compartment
Cer tain components in the engine compart-
ment can be very hot, e.g. the drive system
and the cooler. #
Allow the drive system tocool down and
to uch only the components described
belo w. 300
300
Maintenance and care

&
W
W ARNI NG
ARNI NGRisk of injury from using the
windscreen wipers when the bonnet is
open
If th e windscreen wipers start moving when
th e bonnet is open, you could be trapped by
th e wiper linkage. #
Always switch o. the windscreen wipers
and theve hicle /r stifyo u need toopen
th e bonnet. Opening t
Opening t
he bonnet
he bonnet #
Torelease the bonnet, pull on handle 1. #
Push yellow handle 1onthe bonnet catch to
th e leT as far as it will go (palm down wards).
LiT the bonnet until it is automatically raised
by the pneumatic spring.
Closing t
Closing t he bonnet
he bonnet #
Lowe rth e bonnet and let it drop from a height
of appr oximately 20 cm. Maintenance and care
301
301

K
K
eeping t
eeping t he air
he air-w
-wat
ater duct fr
er duct fr ee
ee #
Keep the area between the bonnet and the
windscreen free of deposits, e.g. ice, snow
and lea ves. Cleaning and care
Cleaning and care
Inf
Inf
or
ormation on w
mation on w ashing t
ashing the v
he v ehicle in a car w
ehicle in a car w ash
ash &
W
WARNING
ARNING Risk of an accident due to
re duced braking po wer aTer washing the
ve hicle
Braking e1ciency is reduced aTer washing the
ve hicle. #
ATer theve hicle has been washed, brake
carefully while paying attention tothe
tra1c conditions until braking po wer has
been fully restored. *
N
NOOTE
TE Dama gefrom au tomatic braking If one of
thefo llowing functions is switched
on, theve hicle brakes automatically in cer tain
situations:
R Active Brake Assist
R Active Distance Assist DISTRONIC
R HOLD function
R Active Parking Assist
To avoid damage totheve hicle, deactivate
th ese systems in thefo llowing or similar situa-
tions: #
during towing #
in a car wash *
N
NOOTE
TE Damage due tounsuitable car wash #
Before driving into a car wash make sure
th at the car wash is suitable forth eve hi-
cle dimensions. #
Ensu rethere is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The 360° Camera or there ve rsing camera is
switched o..
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The blo werfo rth eve ntilation/heating is
switched o..
R The windsc reen wiper switch is in position g.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise theta ilgate could
open unintentionall y. Maintenance and ca
re
303
303