2021 MERCEDES-BENZ B-CLASS HATCHBACK reset

#
Stow all objects in theve hicle securely
so that they cannot getinto the driver's
fo ot we ll. #
Always /t the 0oor mats securely and as
prescribed in order toensure that there
is alw ays su1cient room forth e pedals. #
Do not use loose 0oor mats and do not
place 0oor mats on top of one ano ther. *
N
NO OTE
TE Battery discharging from using devi-
ces connected tothe diagnostics connec-
tion Using devices at
the diagnostics connection
drains the batter y. #
Check thech arge leve l of the batter y. #
Ifth ech arge leve l is lo w,charge the bat-
te ry, e.g. bydriving a considerable dis-
ta nce. Please also no
tethe information about the 12 V
battery and short-dis tance trips in the "Driving
and Parking" chap ter (/ page 173). Connecting and using ano
ther device with the
diagnostics connection can ha vethefo llowing
e.ects:
R Malfunctions in theve hicle system
R Perm anent damage tovehicle components
Please referto thewa rranty term s and conditions
fo rth is matter. Moreo
ver,connecting equipment tothe diagnos-
tics connection can lead toemissions monitoring
information being reset, forex ample. This may
lead totheve hicle failing tomeet there qu ire-
ments of the next emissions inspection during the
main inspection. Quali/ed
Quali/ed
specialis
specialist w
t work
ork shop
shop
A qu ali/ed specialist workshop has the necessary
special skills, tools and quali/cations tocor rectly
car ryout any necessary workon your vehicle.
This particular lyapplies tosaf ety-re leva nt wo rks.
Alw ays ha vethefo llowing workcar ried out on
yo ur vehicle at a quali/ed specialist workshop:
R Safety-re leva nt wo rks
R Service and maintenance work
R Repair work
R Modi/cations as well as installations and con-
ve rsions
R Workon electronic components
R Plug-in h
Plug-in h ybr
ybrid:
id:workon thehy brid system General no
tes
39
39

ing state, component loads, maintenance
requ ire-
ments and tech nical events or faults.
Depending on theve hicle equipment, thefo llo w-
ing data are stored:
R operating status of system components, such
as /ll le vels, tyre pressure or battery status
R malfunctions or faults in impor tant system
components, such as lights or brakes
R system reactions in special driving situations,
such as airbag depl oyment or the inter vention
of stability cont rol systems
R information on events leading tovehicle dam-
age
In cer tain cases, it may be requ ired tostore da ta
th at wo uld ha veotherwise been used only temp o-
rari ly. This may be the case if theve hicle has
de tected a malfunction, forex ample.
If yo u use services, such as repair services and
maintenance work, stored operational data as
we ll as theve hicle identi/cation number can be
re ad out and used. They can be read out by
service network emplo yees, such as workshops
and manu facturers or third parties, such as break- down services. The same is true in
the case of
wa rranty claims and quality assurance measures.
In general, there adout is per form ed via the legally
prescribed port forth e diagnostics connection in
th eve hicle. The operational data that are read out
document tech nical states of theve hicle or of
individual components and assist in the diagnosis
of malfunctions, compliance with warranty obli ga-
tions and quality impr ovement. Tothat end, these
data, in particular information about component
loads, tech nical events, malfunctions and other
fa ults may be transmitted along with theve hicle
identi/cation number tothe manufacturer. Fur-
th ermore, the manufacturer is subject toproduct
liability. Forth is reason the manufacturer also
uses operational data from theve hicle, forex am-
ple, forre calls. These data can also be used to
ex amine the customer's warranty and guarantee
claims.
Fa ult memories in theve hicle can be reset by a
service outl etor at your requ est as part of repair
or maintenance work. Conv
Conv enience and inf ot
enience and inf otainment functions ainment functions
Yo u can store con venience settings and individual
settings in theve hicle and change or reset them
at any time.
Depending on theve hicle equipment, this
includes thefo llowing settings, forex ample:
R seat and steering wheel positions
R suspension and climate cont rolsettings
R individual settings, such as interior lighting
Depending on the selected equipment, you can
import data into vehicle inf otainment functions
yo urself.
Depending on theve hicle equipment, this
includes thefo llowing data, forex ample:
R multimedia data, such as music, /lms or pho-
tosfo r playback in an integ rated multimedia
system
R address book data for use in connection with
an integ rated hands-free system or an integ ra-
te d navigation system
R entered navigation destinations
R data about the use of Internet services General no
tes
43 43

When
theve hicle is switched o., you can con-
tinue tooperate the side windo ws.
This function is available for around four minutes
or until a front door is opened.
A A ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he side windows
he side wind ows
If an obs tacle impedes a side window during the
closing process, the side window will open again
automaticall y.The automatic reve rsing function is
only an aid and is not a substitute foryo ur atten-
tiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite there being reve rsing pr otection
on the side window
The reve rsing function does not react:
R tosoT, light and thin objects, e.g. /n gers.
R during resetting.
The reve rsing function cannot pr event some-
one from becoming trapped in these situa-
tions. #
During the closing process, make sure
th at no body parts are in the closing
area. #
If someone becomes trapped, press the
0062 button toopen the side window
again. A
A
ut
ut omatic function of t
omatic function of t he side windows
he side wind ows In
thefo llowing cases, the side windo wswill be
closed automatically when theve hicle is switched
o.:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply
The side windo wswill be closed as far as theve n-
tilation position. V
V ehicles wit
ehicles wit h a panor
h a panorama sliding sunr
ama sliding sunroof: oof:the side
windo wswill be closed comple tely ifth e sliding
sunroof is open.
If th e side windo wsare obstructed during auto-
matic closing, the side window concerned will
open again slightl y.ATer an other automatic clos-
ing process, the automatic function forth e sun-
ro of and side windo wsmay be deactivated. The
automatic function will be active again the next
time theve hicle is star ted. Conv Conv
enience opening (v
enience opening (v entilating t
entilating the v
he vehicle
ehicle
bef
bef or
ore st
e st ar
arting a jour
ting a jour ne
ney)
y) &
W
WARNING
ARNING Risk of entrapment when open-
ing a side window
When opening a side windo w,parts of the
body could be dr awn in or become trapped
between the side window and window frame. #
When opening, make sure that nobody is
to uching the side windo w. #
Release the button immediately if some-
body becomes trapped. 96
96
Opening and closing

1
Raise
2 Open
3 Close/lo wer
Use the0057 button tooperate the panorama
sliding sunroof and thero ller sunblind.
The panorama sliding sunroof can be operated
only when thero ller sunblind is open. #
Check whe ther the sliding sunroof can be
ra ised or opened when a roof luggage rack is
/t ted. #
T
T o st o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:pressthe0057
button be yond the point of resis tance or pull
and release it. #
T
T o int
o int err
errup
upt aut
t aut omatic oper
omatic oper ation:
ation:brie0y press
th e0057 button in any direction.
The opening/closing process will be stopped.
A
A ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he sliding sun-
he sliding sun-
r
r oof
oof
If an obstacle obstructs the sliding sunroof during
th e closing process, the sliding sunroof will open
again automaticall y.The automatic reve rsing func-
tion is only an aid and is not a substitute foryo ur
attentiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite there ve rsing function being active
In particular, there ve rsing function does not
re act:
R tosoT, light and thin objects, e.g. /n gers.
R towa rdsth e end of the closing procedure.
R during resetting. #
During the closing process, make sure
th at no body parts are in the closing
area. #
Release the button immediately if some-
body becomes trapped.
or #
Brie0y press the button in any direction
during automatic operation.
The closing process will be stopped. A A
ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he r
he roller sunblind
oller sunblind
If an obstacle obstructs thero ller sunblind during
th e closing process, thero ller sunblind will open
again automaticall y.The automatic reve rsing func-
tion is only an aid and is not a substitute foryo ur
attentiveness. 100
100
Opening and closing

R
R
ectifying pr
ectifying pr oblems wit
oblems with t
h the sliding sunr
he sliding sunr oof
oof &
W
WARNING
ARNING Risk of becoming trapped or
fata l injuries when the sliding sunroof is
closed again
If th e sliding sunroof is closed again immedi-
ately aTer it has been bloc ked or reset, it will
close with increased forc e. #
Make sure that no parts of the body are
in the closing area. #
Release the button immediately if some-
body becomes trapped.
or #
Brie0y press the button in any direction
during the automatic closing process.
The closing process will be stopped. The sliding sunr
The sliding sunr
oof canno
oof cannot be closed and y
t be closed and y ou can-
ou can-
no
no t see t
t see t he cause.
he cause.
% The term "sliding sunroof" also refers to the
panorama sliding sunroof.
If th e sliding sunroof is obstructed during closing
and reopens again slightl y: #
Immediately aTer automatic reve rsing, pull
and hold the0057 button down again tothe
point of resis tance until the sliding sunroof is
closed.
The sliding sunroof will be closed with
increased forc e.
If th e sliding sunroof is obstructed again and
opens again slightl y: #
Repeat the pr evious step.
The sliding sunroof will be closed again with
increased forc e.
V V ehicles wit
ehicles wit h a panor
h a panorama sliding sunr
ama sliding sunr oof: t
oof: the slid-
he slid-
ing sunr
ing sunr oof or t
oof or the r
he roller sunblind is no
oller sunblind is no t oper
t operating
ating
smoot
smoot hly
hly.
. #
Reset the sliding sunroof and thero ller sun-
blind.
R
R ese
ese tting t
tting t he sliding sunr
he sliding sunr oof and t
oof and the r
he roller sun-
oller sun-
blind
blind #
Pull and hold the0057 button little bylittle
until the sliding sunroof is fully closed. #
Pull and hold the0057 button little bylittle
until thero ller sunblind is fully closed. #
Use automatic operation tofully open and
th en close the sliding sunroof. Anti-t
Anti-theT
heTprot
pr otection
ection F
F
unction of t
unction of t he immobiliser
he immobiliser The immobiliser pr
events your vehicle from being
star ted without the cor rect key.
The immobiliser is automatically activated when
th eve hicle is switched o., and deactivated when
th eve hicle is switched on. A A
T
TA
A (Anti-
(Anti- TheT
TheT Alar
Alarm syst
m syst em)
em) F
F
unction of t
unction of t heAT
he ATA systA syst em
em
If th eATA system is primed, a visual and audible
alarm is triggered in thefo llowing situations:
R when a door is opened
R when theta ilgate is opened
R when the bonnet is opened
R when interior pr otection is triggered
(/ page 104) 102
102
Opening and closing

Se
Se
tting t
tting t he easy entr
he easy entr y and e
y and exit f
xit feature
eature Multimedia system:
4 © 5
Settings 5
Vehicle
5 Automatic seat adjustment
5 Easy Entry/Exit #
Activate or deactivate the function. Memor
Memor
y function
y function F
F
unction of t
unction of t he memor
he memory function
y function &
W
WARNING
ARNING Risk of an accident if the mem-
ory function is used while driving
If yo u use the memory function on the driver's
side while driving, you could lose control of
th eve hicle as a result of the adjustments
being made. #
Only use the memory function on the
driver's side when theve hicle is station-
ar y. &
W
WARNI NG
ARNI NGRisk of entrapment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat,
yo u and other vehicle occupants – particular ly
ch ildren – could become trapped. #
During the adjustment process of the
memory function, make sure that no one
has any body parts in the sweep of the
seat. #
If someone becomes trapped, press a
preset position button or seat adjust-
ment switch immediatel y. &
W WARNI NG
ARNI NGRisk of entrapment if the mem-
ory function is activated bychildren
Children could become trapped if they acti-
va te the memory function, particular lywhen
unat tended. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. Yo
u can use the memory function when the igni-
tion is switched o..
Seat adjustments for up tothre e people can be
stored and called up using the memory function.
Yo u can sa vesettings forth efo llowing systems:
R Seat
R Seat contour
R Outside mir rors
R Head-up display Seats and st
owing
117 117

Oper
Oper
ating t
ating t he memor
he memor y function
y function S S
t tor
or ing
ing #
Set the desired position for all systems. #
Brie0y press memory button Vandthen
press preset position 0037,TorU
within thre e seconds. #
T
T o call up:
o call up: press and brie0y hold one of preset
position buttons 0037,TorU.
ATer releasing the button, all systems are
mo ved into the stored position. S
S
t
to
o w
w ag
ag e ar
e ar eas
eas N
No
ot
tes on loading t
es on loading t he v
he vehicle
ehicle &
D
DAN
AN GER
GER Risk of poisoning from exhaust
ga ses
Combustion engines emit poisonous exhaust
ga ses, such as carbon monoxide. Exhaust
ga ses can enter theve hicle interior if theta il-
ga te is open when theve hicle is running,
especially if theve hicle is in motion. #
Always switch o. theve hicle before
opening theta ilgate. #
Never drive with theta ilgate open. &
W
WARNING
ARNING Risk of injury from unsecured
items in theve hicle
If objects, lug gage or loads are not secured or
not secured su1cient ly,they could slip, tip
ov er or be thro wn around and thereby hit vehi-
cle occupants.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects in such a wayth at
th ey cannot be thro wn around. #
Before the journe y,secure objects, lug-
ga ge or loads against slipping or tipping
ove r. &
W WARNI NG
ARNI NGRisk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone brac kets cannot alw aysreta in all
objects they contain. 118
118
Seats and st
owing

&
W
WARNI NG
ARNI NGRisk of accident due tomis-
judgement of distance when using the
outside mir ror
The outside mir rors re0ect objects on a
smaller scale. The objects in vi eware in fact
closer than they appear. #
Therefore, alw ays look overyo ur shoul-
der in order toensure that you are aware
of the actual distance between you and
th ero ad users driving behind you. #
T To f o f old in or out:
old in or out: brie0y press button 2. #
T
T o set: o set: press button 1or3 toselect the
outside mir rorto be adjus ted. #
Use button 4toadjust the position of the
mir ror glass.
% Ifth e battery has been disconnected or com-
ple tely dischar ged, you will ha vetoreset the outside mir
rors. Only then will the automatic
mir rorfo lding function workproper ly. #
T
T o r o r eset:
eset: brie0y press button 2.
An outside mir rorth at has been pushed out of
position can be engaged in position again as fol-
lo ws: #
V
Vehicles wit
ehicles wit hout electr
hout electr icall
ically f
y folding outside
olding outside
mirr
mirr or
ors:
s: manually mo vethe outside mir ror into
th e cor rect position. #
V Vehicles wit ehicles wit h electr
h electricall
ically f
y folding outside mir-
olding outside mir-
r
r ors
ors: press and hold button 2.
Yo u will hear a click and the mir ror will audibly
click into place. The outside mir ror will now be
set tothe cor rect position. A
A
ut
ut omatic anti-dazzle mirr
omatic anti-dazzle mirr or
ors function
s function &
W
WARNING
ARNING Risk of acid burns and poison-
ing due tothe anti-dazzle mir ror electro-
ly te
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mir ror breaks. 154
154
Light and sight