damage
theve hicle soc ket,thech arging cable
connector or their contacts. #
Ifyo ufe el there is increased resis tance,
pull thech arging cable connector out of
th e soc ket and reinsert it. R
R
eq
eq uir
uir ements:
ements:
R The transmission is in position j.
R The hybrid system is not activated. The õ
display in the Instrument Display is o..
R The vehicle is unloc ked.
R The charging cable is not taut.
% Depending on the national version, theve hicle
is equipped with one of thefo llowing vehicle
soc kets. Ty
pe 1 vehicle soc ket Ty
pe 2 vehicle soc ket #
Press theto p leT of soc ket 0ap 1and swing
th e soc ket 0ap open outwards.
The % indicator lamp 4and soc ket lamp
5 light up whi te.
% When thehy brid system is activated (the
õ display in the Instrument Display lights
up), soc ket 0ap 1cannot be opened. Driving and parking
199
199
#
Press catch 3tothe leT and fold open
soc ket co ver7. #
Tocharge at a mains soc ket, insert the mains
plug into the mains soc ket of theex tern al
po we r source tothe stop and set the maxi-
mum charging cur rent if requ ired
(/ page 195). #
Insert thech arging cable connector into vehi-
cle soc ket2 tothe stop. If thewa llbox/
ch arging station is not equipped with a charg-
ing cable, inse rtthe plug of theve hicle's
ch arging cable into thewa llbox/charging sta-
tion soc ketto the stop.
Make sure that thech arging cable is not taut
when inser ted.
The # indicator lamp 6and soc ket lamp
5 0ash orange and, as soon as the high-volt-
age battery is charge d, gre en.
When thech arging cable is connected totheve hi-
cle, theve hicle cann otbe star ted or mo ved.
At the start of thech arging process, thech arging
side is shown in the Instrument Display with a
ch arging prediction. The charging prediction re
fers to the time at which the high-voltage bat-
te ry will be fully charge d.
% Depending on thete mp erature, thefa n and
bat tery cooling system may audibly switch on
during thech arging process.
% Ifth eve hicle is idle for lengt hyperiods and
connected tothe mains suppl y,the high-volt-
age battery will be rech arge d automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
% The vehicle is equipped with an elect rical fuse
which pr otects it against overvoltage in the
mains suppl y.This electrical fuse may trip dur-
ing se vere thunderstorms, forex ample, and
may cause the fuse in the building totrip or
may inter rupt thech arging process. These
functions pr otect theve hicle.
ATer the fuse in the building is switched on
again, thech arging process resumes automat-
icall y.Fo llowing an inter ruption in the po wer
supply without the fuse in the building being
tripped, it may take up to te n minutes for
ch arging toresume automaticall y. Ending t Ending t
he c
he char
harging pr
ging pr ocess
ocess %
Depending on the national version, theve hicle
is equipped with one of thefo llowing vehicle
soc kets. Ty
pe 1 vehicle soc ket 200
200
Driving and parking
Ty
pe 2 vehicle soc ket #
Unlo cktheve hicle.
The charging process is then ended. The %
indicator lamp 1lights up white. The vehicle
soc ket is unloc ked. #
V
Vehicle soc ke
ehicle soc ket, type 1:
t, type 1: press and hold button
2 onthech arging cable connector and re
mo vethech arging cable connector from the
ve hicle soc ket. #
V
Vehicle soc ke
ehicle soc ket, type 2:
t, type 2: remo vethech arging
cable connector from theve hicle soc ket within
30 seconds.
ATer the 30 seconds ha veelapsed, theve hicle
soc ket will be loc ked again.
% Ifyo u cannot remo vethech arging cable con-
nector, repeat the unlocking procedure. If the
ch arging cable connector is still loc ked, con-
ta ct a quali/ed specialist workshop. #
Close the soc ket co ver and the soc ket 0ap.
% ATer thech arging cable connector has been
disconnected, the leT % indicator lamp 1
on theve hicle soc ketre mains lit for some
time before switching o.. #
Remo vethech arging cable connector from
th e mains soc ket, or from the soc ket on the
wa llbox/charging station, and st owtheve hi-
cle's charging cable safely in theve hicle
(/ page 191). F F
unction of t
unction of t he c
he charg
harg e lev
e lev el displa
el displa y in t
y in t he Ins
he Ins tr
tru-
u-
ment Displ ay
ment Display 1
Current charge level
2 Time at which comple tely ch arged
3 Preselec ted departure time
4 Current charging capacity
When theve hicle is connected tothe mains sup-
ply and is switched o., the Instrument Display
sho ws th ech arge leve l display for appr oximately
two minutes.
The value of cur rent charging capacity 4can dif-
fe r from the display on thech arging station. Driving and parking
201 201
Appl
Appl
ying/r
ying/r eleasing t
eleasing t he electr
he electric par
ic parking br
king br ake
ake
manual ly
manually
Appl Appl ying
ying #
Push handle 1.
The red! indicator lamp lights up in the
inst rument clus ter. %
The electric parking brake is only securely
applied if there d! indicator lamp is lit
continuousl y.
R R eleasing
eleasing #
Switch on theve hicle. #
Pull handle 1.
The red! indicator lamp in the inst rument
cluster goes out.
Emerg Emerg ency br
ency br aking
aking #
Press and hold handle 1.
As long as theve hicle is in motion, the
Release parking brake message is displayed
and there d! indicator lamp 0ashes.
When theve hicle has been braked toa stand-
still, the electric parking brake is applied. The
re d! indicator lamp lights up in the inst ru-
ment cluster. Inf
Inf
or
ormation on collision det
mation on collision det ection on a park
ection on a parked
ed
v
v ehicle
ehicle If a collision is de
tected when theto w- awa y pro-
te ction is primed on a loc kedve hicle, you will re
ceive a noti/cation in the multimedia system
when you switch theve hicle on.
Yo u will receive information about thefo llowing
points:
R The area of theve hicle that may ha vebeen
damaged.
R The forc e of the impact.
The following situation can lead toinadver tent
activation:
R The par kedve hicle is mo ved, forex ample, in a
two-s tore yga rage.
% Deactivate tow- awa y protection in order to
pr ev ent inadver tent activation. If you deacti-
va te to w-awa y protection, collision de tection
will also be deactivated.
Syst
Syst em limits em limits
De tection may be restric ted in thefo llowing situa-
tions:
R theve hicle is damaged without impact, for
ex ample, if an outside mir ror is torn o. or the
paint is damaged byakey
R an impact occurs at low speed Driving and parking
207 207
#
ESP ®
should only be deactivated in the
fo llowing situations. When ESP
®
is deactivated, theå and¤
wa rning lamps light up continuously in the inst ru-
ment clus ter.
Deactivating ESP ®
has thefo llowing e.ects:
R Driving stability will no longer be impr oved.
R The drive wheels could spin.
R ETS/4ETS traction control is still active.
R V
V ehicles wit
ehicles wit h tr
h trailer hitc
ailer hitc h:
h:stabilisation of the
ve hicle/trailer combination is no lon ger
active.
R Crosswind Assist is no lon ger active.
% Even when ESP ®
is deactivated, you are still
assisted byESP ®
when braking hard.
It may be best toactivate ESP ®
SPORT or deacti-
va te ESP ®
in thefo llowing situations:
R When using snow chains.
R In deep sno w.
R On sand or grav el. %
Spinning the wheels results in a cutting
action, which enhances traction.
% Activate ESP ®
as soon as the situations
described abo veno longer app ly. ESP ®
will
ot herwise not be able tostabilise theve hicle
if th eve hicle starts toskid or a wheel starts
to spin.
If th e÷ ESP®
wa rning lamp lights up continu-
ousl y,ESP ®
is not available due toa malfunction.
Obser veany information which is displ ayed in the
inst rument cluster:
R Indicator and warning lamps (/ page 472)
R Display message s (/page 406)
ET
ET S/4ET
S/4ET S (Electr
S (Electr onicTr
onic Traction Syst
action Syst em)
em)
ETS/4ETS traction cont rol is partof ESP ®
.
ETS/4ETS can impr ovetheve hicle's traction by
inter vening in thefo llowing ways:
R The drive wheels are braked individually if they
spin.
R More drive torque is tr ansferredto the wheel
or wheels with traction. F
F
unction of ESP
unction of ESP ®
®
Cr
Cr osswind Assist
osswind Assist ESP
®
Crosswind Assist de tects sudden gusts of
side wind and helps the driver tokeep theve hicle
in the lane:
R ESP ®
Crosswind Assist is active at vehicle
speeds between appr ox. 75 km/h and
200 km/h when driving straight ahead or cor-
nering slightl y.
R The vehicle is stabilised bymeans of individual
brake application on one side. F
F
unction of ESP
unction of ESP ®
®
tr
trailer st
ailer st abilisation
abilisation &
W
WARNING
ARNING Risk of accident in poor road
and weather conditions
In poor road and weather conditions, the
trailer stabilisation cannot pr event lurching of
th eve hicle/trailer combination. Trailers with a
high cent reofgrav ity may tip over before
ESP ®
de tects this. #
Always adapt your driving style tosuit
th e cur rent road and weather conditions. Driving and parking
213
213
When driving with a trailer, ESP
®
can stabilise
yo ur vehicle if the trailer begins toswer vefrom
side toside:
R ESP ®
trailer stabilisation is active abo ve
speeds of 65 km/h.
R Slight swerving is reduced bymeans of a tar-
ge ted, individual brake application on one
side.
R Intheev ent of se vere swerving, the engine
output is also reduced and all wheels are
braked.
ESP ®
trailer stabilisation may be impaired or may
not function if:
R The trailer is not connected cor rectly or is not
de tected proper lyby theve hicle. A A
ctiv
ctiv ating/deactiv
ating/deactiv ating ESP
ating ESP®
®
(Electr
(Electr onicSt
onic Stability
ability
Pr
Pr ogr
ogr am)
am) Multimedia system:
4 © 5
Settings 5
Quick access
% ESP®
can only be activated/deactivated using
qu ick access when at least one other function is
available in quick access. ESP ®
can other-
wise be found in theAssistance menu. #
Select ESP. #
Select Onorå Off.
% If ESP ®
is deactivated and drive prog ram
Î was pr eviously selected, drive prog ram
A is automatically activated the next time
th eve hicle is star ted.
ESP ®
is deactivated if theå ESP®
OFF warn-
ing lamp lights up continuously in the inst rument
cluster.
Obser vethe information on warning lamps and
display message s which may be shown in the
inst rument cluster. A A
djus
djus ting ESP
ting ESP ®
® #
T
To activ
o activ at
ate ESP
e ESP ®
®
SPORT
SPORT :
:press and hold dis-
play button 1until thero ad in but ton symbol
2 lights up yello w.
The å andÆ warning lamps appear in
th e inst rument cluster. 214
214
Driving and parking
#
T
To deactiv
o deactiv at
ate ESP
e ESP ®
®
:
:press and hold display
button 1until thero ad in but ton symbol 2
lights up red.
The å and¤ warning lamps appear in
th e inst rument clus ter.
% When you deactivate ESP ®
in theI drive
prog ram, AMG Dynamics automatically
switches tothe MasMast ter
er leve l. #
T
To activ
o activ at
at e ESP
e ESP ®
®
:
:press and hold display but-
to n1 until thero ad in but ton symbol 2
lights up blue.
The å, Æand¤ warning lamps go
out.
When the÷ symbol is shown with a red !!on
th e display button, ESP ®
is malfunctioning.
Obser vethe information on warning lamps and
display message s which are shown in the inst ru-
ment clus ter. F F
unction of EBD
unction of EBD Electronic Breakforce Distribution (EBD) is
char-
acterised bythefo llowing:
R Monitoring and regulating the brake pressure
on there ar wheels.
R Impr oved driving stability when braking, espe-
cially on bends. F
F
unction of S
unction of S TEER C
TEER CONTR
ONTROL
OL ST
EER CONTROL assists youby transmitting a
noticeable steering forc eto the steering wheel in
th e direction requ ired forve hicle stabilisation.
If yo u brake and bo thright wheels or bo thleT
wheels are on a wet or slippery road sur face, you
will receive a steering recommendation.
Syst
Syst em limits
em limits
ST EER CONTROL may be impaired or may not
function in thefo llowing situations:
R ESP ®
is deactivated.
R ESP ®
is malfunctioning.
R The steering is malfunctioning. If ESP
®
is malfunctioning, you will be assisted fur-
th er by the electric po wer steering. HOLD function
HOLD function
HOLD function
HOLD function
The HOLD function holds
theve hicle at a stand-
still without requ iring youto depress the brake
pedal, e.g. while waiting in tra1c.
The HOLD function is only an aid. The responsibil-
ity forth eve hicle safely standing still remains with
th e driver.
Syst Syst em limits
em limits
The HOLD function is only intended toprov ide
assistance when driving and is not a su1cient
means of safeguarding theve hicle against rolling
awa y when stationa ry.
R The incline must not be greater than 30%. Driving and parking
215
215
A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the HOLD function
he HOLD function &
W
WARNING
ARNING Risk of an accident due tothe
HOLD function being active when you
lea vetheve hicle
If th eve hicle is only braked with the HOLD
function it could, in thefo llowing situations,
ro llawa y:
R Ifth ere is a malfunction in the system or in
th e po wer suppl y.
R Ifth e HOLD function is deactivated by
depressing the accelerator pedal or brake
pedal, e.g. byave hicle occupant. #
Always secure theve hicle against rolling
awa y before you lea veit. R
R
eq
eq uir
uir ements:
ements:
R The vehicle is stationar y.
R The driver's door is closed or the seat belt on
th e driver's side is fastened.
R The vehicle has been star ted or has been
automatically switched o. bythe ECO start/
stop function. R
The electric parking brake is released.
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The transmission is in position h,kori.
A
A ctiv
ctiv ating t
ating t he HOLD function
he HOLD function #
Depress the brake pedal, and aTer a short
time quickly depress fur ther until theë
display appears in the Instrument Displa y. #
Release the brake pedal.
Deactiv Deactiv ating t ating the HOLD function
he HOLD function #
Depress the accelerator pedal topull away.
or #
Depress the brake pedal until theë display
disappears from the Instrument Displa y.
The HOLD function is deactivated in thefo llowing
situations:
R Active Distance Assist DISTRONIC is acti va-
te d.
R The transmission is shiTed toposition j.
R The vehicle is secured with the electric par k-
ing brake. In
thefo llowing situations, theve hicle is held by
transmission position jand/or bythe electric
parking brake:
R The seat belt is unfastened and the driver's
door is opened.
R The vehicle is switched o..
R There is a system malfunction.
R The po wer supply is insu1cient. F F
unction of Hill St
unction of Hill Star
art Assist
t Assist Hill
Start Assist holds theve hicle for a short time
when pulling away on a hill under thefo llowing
conditions:
R The transmission is in position hork.
R The electric parking brake is released.
This gives you enough time tomo veyour foot
from the brake pedal tothe accelerator pedal and
depress it before theve hicle begins torollawa y. 216
216
Driving and parking