2021 MERCEDES-BENZ AMG GT COUPE display

Se
Se
tting t
tting t he easy entr
he easy entr y and e
y and exit f
xit feature
eature Multimedia system:
4 © 5
Settings 5
Vehicle
5 Automatic seat adjustment
5 Easy Entry/Exit #
Activate or deactivate the function. Memor
Memor
y function
y function F
F
unction of t
unction of t he memor
he memory function
y function &
W
WARNING
ARNING Risk of an accident if the mem-
ory function is used while driving
If yo u use the memory function on the driver's
side while driving, you could lose control of
th eve hicle as a result of the adjustments
being made. #
Only use the memory function on the
driver's side when theve hicle is station-
ar y. &
W
WARNI NG
ARNI NGRisk of entrapment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat,
yo u and other vehicle occupants – particular ly
ch ildren – could become trapped. #
During the adjustment process of the
memory function, make sure that no one
has any body parts in the sweep of the
seat. #
If someone becomes trapped, press a
preset position button or seat adjust-
ment switch immediatel y. &
W WARNI NG
ARNI NGRisk of entrapment if the mem-
ory function is activated bychildren
Children could become trapped if they acti-
va te the memory function, particular lywhen
unat tended. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. Yo
u can use the memory function when theve hi-
cle is switched o..
Seat adjustments for up tothre e people can be
stored and called up using the memory function.
Yo u can sa vesettings forth efo llowing systems:
R Seat, backrest and head restraint
R Steering wheel
R Outside mir rors
R Head-up display Seats and st
owing
117 117

Thr
Through-loading f
ough-loading f eatur
eature in t
e in the r
he rear benc
ear benc h seat
h seat
(EASY
(EASY -PAC
-P AC K Quic
K Quic kf
kfold)
old) F
F
olding t
olding t he r
he rear seat bac
ear seat bac kr
kres
est f t forw
orw ar
ards
ds &
W
WARNI NG
ARNI NGRisk of accident if there ar
ben chseat, rear seat and seat backrest
are not engaged
The rear ben chseat, rear seat and seat bac k-
re st ma yfo ld forw ards, even while theve hicle
is in motion.
R As a result, theve hicle occupant will be
pressed into the seat belt with increased
fo rc e. The seat belt will not be able topro-
te ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. If
th e leT and right seat backrests are not
engaged and loc ked in place, this will be shown
on the multifunction display on the inst rument
cluster. A warning tone will also sound.
If th e centre seat backrest is not engaged and
loc ked in place, the lock veri/cation indicator will
be red.
R
R eq
eq uir
uir ements:
ements:
R Tofold the centre seat backrest forw ards: the
cent reseat backrest has been unloc ked.
Yo u can fold the centre and outer seat backrests
fo rw ards separatel y.
Yo u can unlock the outer seat backrests electri-
call y.The buttons for unlocking are located in the
load compartment. #
V
Vehicles wit
ehicles wit hout a memor
hout a memor y function:
y function:movethe
driver's or front passenger seat forw ards, if
necessar y.
V
V ehicles wit
ehicles wit h a memor
h a memor y function:
y function: if necessary,
when the seat backrest in there ar is folded
fo rw ard, the cor responding front seat will mo ve
fo rw ards slightly toavo id a collision. 122
122
Seats and st
owing

#
If necessar y,fully insert the head restraints in
th ere ar seat backrest. #
T
To f
o f old t
old t he
heleT
leT and r
and r ight seat bac
ight seat bac kr
kres
es ts
ts
f
f orw
orw ar
ard:
d: pull right or leT release handle 1. #
V
Vehicles wit
ehicles wit h a centr
h a centre seat bac
e seat bac kr
krest:
est: pull
re lease catch 3of seat backrest 2forw ard. #
Fold seat backrest 2forw ards. #
If necessar y,reset the driver's or front
passenger seat.
F
F olding bac
olding bac k t
k the r
he r ear seat bac
ear seat bac kr
krest
est &
W
WARNING
ARNING Risk of becoming trapped when
adjusting the seats
When you adjust a seat, you may trap yourself
or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. *
N
NOOTE
TE Damage caused bytrapping the
seat belt when folding back the seat bac k-
re st The seat belt could become trapped and
thus
be damaged when the seat backrest is folded
bac k. #
Make sure that the seat belt is not trap-
ped when folding back the seat backrest. #
Movethe driver's or front passenger seat for-
wa rds, if necessar y. #
Foldthe cor responding seat backrest 1back
until it engages.
LeT LeT and r
and r ight seat bac
ight seat bac kr
kres
es ts:
ts: ifth e seat bac k-
re st is not engaged and lo cked in place, this
will be shown on the multifunction display on
th e inst rument cluster.
A wa rning tone will also sound.
V
V ehicles wit
ehicles wit h a centr
h a centre seat bac
e seat bac kr
krest:
est: ifthe
seat backrest is not engaged and loc ked in Seats and st
owing
123
123

A list of Qi-compatible mobile phones can be
fo und at: https://www.mercedes-benz-
mobile.com. #
Place the mobile phone as close tothe centre
of mat 1as possible with the display facing
upwards.
When thech arging symbol is shown in the
multimedia system, the mobile phone is being
ch arge d.
Malfunctions during thech arging process are
shown in the central displa y.
% The mat can be remo vedfo r cleaning, e.g.
using clean, luk ewarmwater. R
R adio eq adio eq uipment appr ov
uipment appr oval number
al number s f
s for Br
or Br azil
azil
This device operates on a secondary basis, that is
to say it has no pr otection against harmful inter-
fe re nce, not even from the same type of stations,
and must not cause inter fere nce with systems
ope rating on a prima rybasis.
This product is permitted in accordance with the
procedure de/ned in Directive 242/2000 bythe
Brazilian telecommunications agency ANATEL and
meets the applicable tech nical requ irements.
Fu rther information is available on the ANATEL
we bsite. www.anatel.go v.br #
Further information on the declaration of con-
fo rm ity forve hicle components which receive
and/or transmit radio waves. W
W
ir
irelessl
elessl y c
y char
har ging a mobile phone in t
ging a mobile phone in t he r
he rear
ear
passeng
passeng er com
er compar
partment
tment R
R
eq
eq uir
uir ements:
ements:
R The mobile phone is suitable for wireless
ch arging (Qi-compatible mobile phone). A list of Qi-compatible mobile phones can be
fo
und at: https://www.mercedes-benz-
mobile.com Example:
vehicles with luxury individual rear seats #
Open the st owage compartment in there ar
cent reconsole. 132 132
Seats and st
owing

The
vehicle in front will be illuminated bythe low
beam.
At speeds below 25 km/h or when there is su1-
cient street lighting:
R The partial high beam and the high beam will
be switched o. automaticall y.
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.
At speeds greater than appr oximately 50 km/h:
R The headlamp range of the low beam is regu-
lated automatically based on the distance to
ot her road users.
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist Plus t Pluson/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
When the high beam is switched on automati-
cally in the dar k, the_ indicator lamp will
light up on the central display section of the
inst rument displa y.
Switc Switc hing
hing o.
o. #
Switch o. the high beam using the combina-
tion switch. Se
Se
tting t
tting t he lo
he low beam (v
w beam (v ehicles wit
ehicles wit h MUL
h MULTIBEAM
TIBEAM
LED headlam
LED headlam ps onl
ps only)
y) Multimedia system:
4 © 5
Settings 5
Lights
5 Dipped-beams #
Select Right-side traffic, Left-side trafficor
Automatic. Se
Se
tting t
tting t he e
he ext
xt er
er ior lighting
ior lighting switc
switch-o.
h-o. dela
delay time
y time R
R
eq
eq uir
uir ements:
ements:
R The light switch is in theà position. Multimedia system:
4 © 5
Settings 5
Lights
5 Ext. light. del. sw. off #
Set the swit ch-o. delay time.
When theve hicle engine is switched o., the
ex terior lighting will be activated forth e set
time. Switc
Switc
hing t
hing t he surr
he surr ound lighting
ound lighting on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Surround lighting
When Surround lighting is active,theex terior
lighting lights up for 40 seconds aTer theve hicle
is unloc ked. When you start theve hicle, the sur-
ro und lighting is deactivated and the automatic
driving lights are activated. #
Activate or deactivate the function. 140
140
Light and sight

#
Foldthe wiper arms back onto the wind-
screen. #
Switch on theve hicle. #
Press theî button on the combination
switch (/ page 142).
The wiper arms will return totheir original
positions. #
Switch o. theve hicle.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing. Maint
Maint enance display
enance display #
Remo veprotective /lm 1from the mainte-
nance displa yson the tips of the ne wly/tted
wiper blades.
When the colour of the maintenance displa ys
ch anges from black toyello w, replace the wiper
blades. %
The duration until the colour changes varies
depending on the usage conditions. Mirr
Mirr
ors
ors Oper
Oper
ating t
ating t he outside mirr
he outside mirr ors
ors &
W WARNING ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi-
cle is in motion #
Before starting theve hicle: in particular,
adjust the driver's seat, head restraint,
stee ring wheel and mir ror,and fasten
yo ur seat belt. 144
144
Light and sight

Switc
Switc
hing on immediat
hing on immediat ely
ely #
Press and hold theu button.
Se
Se tting t
tting t he depar
he depar tur
ture time
e time #
Brie0y press button u. #
Press the, or. button repeatedly
until the time tobe changed appears on the
displa y. #
Press theu and^ buttons simultane-
ousl y.
The Îsymbol on there mo tecont rol display
will 0ash. #
Use the, and. buttons toset the
desired departure time. #
Press theu and^ buttons simultane-
ousl y.
The new departure time will be stored.
Up tothre e departure times can be stored. #
T
To activ
o activ at
ate t
e t he depar
he depar tur
ture time:
e time: selectthe
desired departure time and press and hold
th eu button.
The Ísymbol, the departure time and,
depending on the selected departure time, the
letter A A, B , B or CCwill appear on the displa y. #
T
To deactiv
o deactiv at
ate t
e t he depar
he depar tur
ture time:
e time: selectthe
desired departure time and press and hold
th e^ button.
OFF
OFF will appear on the displa y. #
T
To c
o c hec
hec k t
k the st
he st atus of t
atus of t he activ
he active st
e stationar
ationar y
y
heat
heat er
er:
:brie0y press theu button. Switc Switc
hing hingo.
o.immediat
immediat ely
ely #
Press and hold the^ button.
Ov
Ov er
ervie
vie w of t
w of t he r
he remot
emot e contr
e contr ol display
ol display s (st
s (station-
ation-
ar
ar y heat
y heat er/v
er/ventilation)
entilation) 1
Stationary ventilation switched on
2 Stationary heater switched on
3 Selected departure time
4 Remaining time forth e stationary heater/
ve ntilation (in minutes)
5 Stationary heater/ ventilation active
6 Departure time activated
7 Signal strength Climate cont
rol
159
159

R
R
ectifying pr
ectifying pr oblems wit
oblems with t
h the r
he r emot
emot e contr
e contr ol f
ol for
or
t
t he st
he st ationar
ationar y heat
y heater/v
er/ventilation
entilation
F
F AIL
AIL ¨
¨appear
appear s on t
s on the r
he remot
emot e contr
e contr ol display
ol display
Po ssible cause:
R The signal transmission between the transmit-
te r and receiver is malfunctioning. #
Change your position in relation totheve hicle,
moving closer if necessar y.
F
F AIL appear
AIL appear s on t
s on the r
he remot
emot e contr
e contr ol display
ol display
Po ssible cause:
R The star ter battery is not su1ciently charge d. #
Char gethe star ter batter y.
R The fuel tank content is below there ser vefuel
le ve l. #
Refuel at the nearest /lling station.
F
F AIL
AIL ¯
¯ appear
appear s on t
s on the r
he remot
emot e contr
e contr ol display
ol display
Po ssible cause:
R There is a malfunction in the stationary heater. #
Have the stationary heater checked at a quali-
/ed specialist workshop. Air v
Air v
ents
ents A
A
djus
djusting t ting t he fr
he front air v
ont air v ents
ents &
W
WARNING
ARNING Risk of burns or frostbite due to
being too close tothe air vents
Ve ry hot or very cold air can 0ow from the air
ve nts. #
Make sure that all vehicle occupants
alw ays maintain a su1cient dis tance
from the air vents. #
If necessar y,direct the air0ow toano ther
area of theve hicle interior. To
guarantee the 0ow of fresh air thro ugh the air
ve nts into theve hicle interior, comply with thefo l-
lowing:
R Alwayske ep theve nts and ventilation grilles in
th eve hicle interior clear.
R Keep the air inlet free of deposits
(/ page 343). #
T To open or close: o open or close: hold airvent 1 inthe
cent reand turn it tothe leT or right as far as it
will go. #
T
To se
o se t t
t the
he air0ow
air0ow dir
direction:
ection: hold air vent 1 in
th e centre and mo veit up or down or tothe
leT or right. Climate control
161
161