2021 MAZDA MODEL CX-30 Owners Manual

Page 105 of 594

MAZDA MODEL CX-30 2021  Owners Manual NOTE
After locking by pressing the door-lock
switch and when all the doors are
closed with the transmitter left in the
vehicle, all the doors, liftgate, and
fuel-filler lid are unlocked.
 
Door-lock

Page 106 of 594

MAZDA MODEL CX-30 2021  Owners Manual (Without theft-deterrent system)
When locking, the hazard warning
lights and a beep sound operate 1
time.
In addition, before the liftgate closes,
the hazard warning lights operate 2
times and a long

Page 107 of 594

MAZDA MODEL CX-30 2021  Owners Manual 3. Unlock
 
Operation from outside
To lock any door using its door-lock
knob from the outside, press the
door-lock knob to the lock position
and close the door (holding the door
handle in the open pos

Page 108 of 594

MAZDA MODEL CX-30 2021  Owners Manual Liftgate
▼Liftgate
WARNING
Never allow a person to ride in the
luggage compartment:
Allowing a person to ride in the
luggage compartment is dangerous.
The person in the luggage
compartment could be

Page 109 of 594

MAZDA MODEL CX-30 2021  Owners Manual Do not modify or replace the liftgate
damper stay. Consult an Authorized
Mazda Dealer if a liftgate damper
stay is deformed or damaged for
reasons such as a collision or if there
is some other prob

Page 110 of 594

MAZDA MODEL CX-30 2021  Owners Manual Closing the liftgate
Lower the liftgate slowly using the
liftgate grip recess, then push the
liftgate closed using both hands.
Do not slam it. Pull up on the liftgate
to make sure it is secure.
For th

Page 111 of 594

MAZDA MODEL CX-30 2021  Owners Manual Never allow children to operate the
power liftgate system:
Allowing children to operate the
power liftgate switch and the keyless
entry system is dangerous. Children are
not aware of the dangers of pe

Page 112 of 594

MAZDA MODEL CX-30 2021  Owners Manual NOTE
When opening the liftgate by
pressing the power liftgate button on
the transmitter, the liftgate can be
opened even when it is locked.
If the power liftgate button on the
transmitter is pre