2021 MAZDA MODEL CX-3 Owners Manual

Light bulbCategory
Wat tage UN-R*1(SAE)
Side turn signal lights
*LED ― (― )
High-mount brake light LED― (― )
Rear turn signal lights 21WY21W (7443NA)
Rear side-marker lights Bulb type
5W5W (―)
LED type LED― (― )
Brake lights/Taillights Bulb type
21/5W21/5W (7443)
LED type LED― (― )
Reverse lights Bulb type
16W16W (921)
LED type LED― (― )
Taillights
*LED type LED― (― )
License plate lights 5W5W (―)
*1 UN-R stands for United Nations Regulation.
Interior light
Light bulb Category
Wa t t ag e UN-R*1
Overhead light (Front)/Map lights 8―
Overhead light (Rear) 10―
Luggage compartment light 5―
*1 UN-R stands for United Nations Regulation.
▼Tires
NOTE
The tires have been optimally matched with the chassis of your vehicle.
When replacing tires, Mazda recommends that you replace tires of the same type originally
fitted to your vehicle. For details, contact an Authorized Mazda Dealer.
Check the tire pressure label for tire size and inflation pressure.
Refer to Tire Inflation Pressure on page 6-36.
Standard tire
(U.S.A. and Canada)
Tire size Inflation pressure
Front Rear
P215/60R16 94H 250 kPa (36 psi)240 kPa (35 psi)
P215/50R18 92V 250 kPa (36 psi)240 kPa (35 psi)
Specifications
Specifications
*Some models.9-7
CX-3_8JL1-EA-20G_Edition1_old 2020-5-22 15:31:00

(Mexico)
Tire sizeInflation pressure
Up to 3 persons ―Full load
215/60R16 95V Front
230 kPa (2.3 bar, 33 psi) 260 kPa (2.6 bar, 38 psi)
Rear 210 kPa (2.1 bar, 30 psi) 330 kPa (3.3 bar, 48 psi)
215/50R18 92V Front
230 kPa (2.3 bar, 33 psi) 260 kPa (2.6 bar, 38 psi)
Rear 210 kPa (2.1 bar, 30 psi) 330 kPa (3.3 bar, 48 psi)
1 person's weight: About 75 kg
Temporary spare tire
(U.S.A. and Canada)
Tire size Inflation pressure
T125/90D16 98M 420 kPa (60 psi)
(Mexico)
Tire sizeInflation pressure
185/60R16 86M 300 kPa (3.0 bar, 44 psi)
Lug nut tightening torque
When installing a tire, tighten the lug nut to the following torque.
108―147 N·m (12―14 kgf·m, 80 ―108 ft·lbf)
▼Fuses
Refer to Fuses on page 6-47.
Specifications
Specifications
9-8
CX-3_8JL1-EA-20G_Edition1_old
2020-5-22 15:31:00

Personalization Features
The following personalization features can be set or changed by an Authorized Mazda Deal‐
er. Consult an Authorized Mazda Dealer for details.
Additionally, some of the personalization features can be changed by the customer depend ‐
ing on the feature.
Personalization features and settings which can be changed differ depending on the market
and specification.
Settings Change Method
Settings can be changed by operating the center display screen.
A: Refer to Settings on page 5-123.
B: Refer to Fuel Economy Monitor on page 4-69.
C: Refer to Active driving display on page 4-18.
Settings can be changed by operating the vehicle switches.
D: Refer to Stopping The Smart City Brake Support (SCBS) System Operation on page
4-122.
E: Refer to Auto Lock/Unlock Function on page 3-16.
F: Refer to Transmitter on page 3-5.
G: Refer to Locking, Unlocking with Request Switch (With the advanced keyless function)
on page 3-13.
Settings can be changed by an Authorized Mazda Dealer.
Item FeatureFactory Set
‐
ting Available Settings Settings
Change
Method
Safety
Smart City Brake Support
(SCBS) (page 4-120) The system can be changed so
that Smart City Brake Support
(SCBS) does not operate.
*1On
On/Off A D ―
Advanced Smart City
Brake Support (Advanced
SCBS) (page 4-116)
Smart Brake Support (SBS)
(page 4-123) The system can be changed so
that Smart City Brake Support
(Advanced SCBS)/Smart Brake
Support (SBS) does not oper
‐
ate.
*1
On On/Off A ―
The distance at which the colli ‐
sion warning activates can be
changed. Med. Near/Med./Far A
―
The volume of the collision
warning can be changed. High High/Low/Off A
―
Specifications
Personalization Features
9-9
CX-3_8JL1-EA-20G_Edition1_old 2020-5-22 15:31:00

ItemFeatureFactory Set‐
ting Available Settings Settings
Change
Method
Lane Departure Warning
System (LDWS) (page
4-82) The warning timing in which
the Lane Departure Warning
System (LDWS) determines
that the vehicle may be deviat
‐
ing from its lane can be
changed. At At/Before A
―The sensitivity of the warning
for the Lane Departure Warning
System (LDWS) can be
changed. Low
High/Low A ―
Warning beep sound*2Beep Beep/Rumbl. A ―
Warning beep volumeRumbl. High High/Mid/Low A
―Beep HighHigh/Low A―
Blind Spot Monitoring
(BSM) (page 4-87) The system can be changed so
that Blind Spot Monitoring
(BSM) does not operate.*1On
On/Off A ―
Warning beep volume*3High High/
Low/ Off A
―
Traffic Sign Recognition
System (TSR)*4 (page
4-93) The Traffic Sign Recognition
System (TSR) can be set to in
‐
operable.
*1On On/Off A ―
The warning pattern of the ex ‐
cessive speed warning can be
changed. OffOff/
Vi s ua l /
Audio & Visual A
―
The activation timing for the
excessive speed warning can be
changed. 0 0/ 5/ 10 A
―
Distance Recognition Sup ‐
port System (DRSS) (page
4-99) The system can be changed so
that Distance Recognition Sup‐
port System (DRSS) does not
operate.*1
On
On/Off A ―
The distance at which the vehi‐
cle ahead and your vehicle indi ‐
cated in the display flashes in
white can be changed. Near Far/Med./Near A
―
Ve h i c l e
Specifications
Personalization Features
9-10
CX-3_8JL1-EA-20G_Edition1_old 2020-5-22 15:31:00

ItemFeatureFactory Set
‐
ting Available Settings Settings
Change
Method
Door locks (page 3-16) Operation condition of auto
lock/unlock function Lock: When
Driving Un ‐
lock: IGN Off Lock: Out of Park
Unlock: In Park/
Lock: Shifting Out of Park/
Lock: When Driving Unlock: In Park/
Lock: When Driving Unlock: IGN Off/
Lock: When Driving/ Off AE
Keyless entry system (page
3-4)
The method for unlocking the
doors using the transmitter can
be changed.
Driver's: Once,
All Doors:Tw i c e All Doors: Once/
Driver's: Once, All Doors: Twice AFThe time required for the doors
to relock automatically after
unlocking with the transmitter
can be changed. 60 seconds
90 seconds/
60 seconds/
30 seconds A
―
Advanced keyless entry
system (page 3-9) The method for unlocking the
doors using the request switch/
transmitter can be changed.
Driver's: Once,
All Doors:Tw i c e All Doors: Once/
Driver's: Once, All Doors: Twice A
F,
G
The volume of the answer-back
beep during advanced keyless
entry system operation can be
changed. MediumHigh/
Medium/ Low/
Off AG
The function to automatically
lock the doors wh
en leaving the
vehicle while carrying the key
can be changed. Off
On/Off A ―
The time required for the doors
to relock automatically after
unlocking with the request
switch/transmitter can be
changed. 60 seconds
90 seconds/
60 seconds/
30 seconds A
―
Illuminated entry system
(page 5-143) Time until interior lights turn
off after closing door
15 seconds60 seconds/
30 seconds/
15 seconds/
7.5 seconds A
―
Time until interior lights turn
off automatically when any
door is not closed completely 30 minutes60 minutes/
30 minutes/
10 minutes A
―
Auto-wiper control (page
4-48) Operational/non-operational On
On/Off*5A―
Specifications
Personalization Features
9-11
CX-3_8JL1-EA-20G_Edition1_old 2020-5-22 15:31:00

ItemFeatureFactory Set‐
ting Available Settings Settings
Change
Method
Daytime running lights
(page 4-45) Operational/non-operational On On/Off A
―
Auto headlight off*6 (page
4-40) Time until headlights
turn off 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/
Off
*7
A―
Auto-light control (page
4-40) Timing by which lights turn on Medium High/
Med.High/ Medium/
Med.Low/ Low A
―
High Beam Control System
(HBC) (page 4-79) Operational/non-operational*1On
On/Off A ―
Adaptive Front Lighting
System (AFS) (page 4-78) Operational/non-operational*1On
On/Off A ―
Lights-on reminder*8 (page
7-42) Warning beep volume
High High/Low/Off A―
Coming home light (page
4-44)Time until headlights
turn off 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/ Off A
―
Leaving home light (page
4-45) Operational/non-operational On On/Off A
―
Turn indicator (page 4-47) Beep volumeHighHigh/Low A ―
Three-flash turn signal
(page 4-47) Operational/non-operational On On/Off A
―
Rear window defogger
(page 4-52)The operation time for the rear
window defogger can be
changed.
15 minutes
15 minutes/
Continuous*9――
System
Language Language indicated in display US English Depends on mar
‐
ket
*10A ―
Temperature Temperature unit indicated in
display °F °F/°C A
―
DistanceDistance unit indicated in dis‐
play mi/km mi/km A
―
Fuel Economy Monitor (page 4-69)
Ending display Display/non-display Off On/Off B ―
Specifications
Personalization Features
9-12
CX-3_8JL1-EA-20G_Edition1_old 2020-5-22 15:31:00

ItemFeatureFactory Set
‐
ting Available Settings Settings
Change
Method
Fuel economy resetting
procedure Linkage/non-linkage with fuel
economy reset and trip meter
reset
Off
On/Off B ―
Active Driving Display (page 4-18)
Display Setting can be changed so that
the Active Driving Display is
not displayed.
On On/Off C
―
The display height (up/down
position) can be changed. 013 steps up/down
from initial setting (total: 27 steps) C
―
The method for adjusting the
display brightness (automatical ‐
ly/manually) can be changed. Auto Auto/Man. C
―
The standard brightness while
automatic adjustment is select‐
ed can be changed using the
brightness adjustment. 0
2 steps up/down from
initial setting (total: 5 steps) C
―
The standard brightness while
manual adjustment is selected
can be changed using the
brightness adjustment. 0
20 steps up/down
from initial setting (total: 41 steps) C
―
Navigation guidance Display/non-display OnOn/Off C ―
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed. The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*4 This system functions only when the navigation system is functioning.*5 If the auto-wiper control is set to Off, the wiper lever position is set to intermittent operation.*6 If the setting is changed to Off, the following opera tion is performed according to the headlight switch
position:
At position: Headlights turn off immediately after the ignition is switched off.At any position other than : Headlights do not turn off after the ignition is switched off.*7 When set to Off, the lights-on reminder is operable.*8 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to Off.
Refer to Lights-On Reminder on page 7-42.
*9 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of
the rear window defogger has been changed to Continuous.
*10 Available only in display from the center display.
Specifications
Personalization Features
9-13
CX-3_8JL1-EA-20G_Edition1_old 2020-5-22 15:31:00

MEMO
9-14
CX-3_8JL1-EA-20G_Edition1_old2020-5-22 15:31:00