2021 KIA SELTOS steering

1-6
Using the touch screen
This system is equipped with a touch-enabled screen. You can use
various practices by using this feature.
ÝWarning
Do not use the touch screen while driving as this will divert your
attention away from the safe operation of the vehicle. You may
lose your steering control which could cause an accident and
severe bodily injuries.
ÜCaution
Do not press the touch screen with excessive force or a sharp
object. The touch screen may become damaged.
Be careful for the touch screen not to contact any electrically
charged object. Static or other electric shock may cause the
system to malfunction or damage the touch screen.
A
A
The touch screen does not respond when you are wearing
gloves. Take off the gloves or wear electrostatic touch gloves.
ÜCaution
The system can be turned on even when the ignition switch is
in “ACC” or “ON.” However, when you use the system without
turning on the vehicle for a long time, it may cause battery
discharge. To use the system for a long time, be sure to turn
on the vehicle.
When you use the system with the vehicle turned off, the
battery warning message appears. The warning message
disappears as soon as you turn on the vehicle.
AA
The screen may differ depending on the vehicle model and
specifications.
A
A
When you turn off and on the vehicle, the system is turned on
with the mode and settings used when the vehicle was turned
off.
A
A
To prevent audio from playing loud when you turn on the
vehicle, adjust the system volume to an adequate level.
A
A
To automatically decrease the system volume, move to the All
Menus screen and press Setup >
Sound >
System Volumes
> Start-up Volume Limit to set the function.
> See “ Start-up
Volume Limit.”

2-4
Using the phone projection
function
When you connect an Android smartphone or iPhone to the
vehicle with a USB cable, you can run and control applications
on the phone through the widescreen using its user-friendly
interface.
ÝWarning
Do not adjust or set up any phone settings while driving. You may
lose your steering control which could cause an accident and
severe bodily injuries.
ÜCaution
Using an approved USB cable provided by your smartphone
manufacturer is recommended. Using unapproved USB cables
may cause a phone projection error or a system malfunction.
Pairing to an Android smartphone via
Android Auto
When you connect an Android smartphone to the vehicle with
Android Auto, you can run and control applications on the phone
through the widescreen using its user-friendly interface.
1 To use Android Auto, first check the following.
Visit the Android Auto website at https://www.android.
com/auto to check the list of countries, device types, and
models that support Android Auto.
Download and install the Android Auto application from
Google Play Store. It is not possible to install Android Auto
in countries that do not support the feature.
2 On the All Menus screen, press Setup
>
Device
Connections >
Android Auto and select the
Enable Android Auto checkbox.

2-5
Using the Android Auto
1 On the All Menus screen, press Android Auto.
2 Perform the desired function.
To run the functions for phone, music, or navigation on
the smartphone, press the corresponding app icon.
A
A
When you are using your smartphone′s navigation
via phone projection, sounds from both the system′s
radio/media function and the navigation will be output
through your vehicle′s speakers. When you turn the
Volume knob while both sounds are being output, the
navigation volume is adjusted first.
To use the Google voice recognition, press and hold the
Voice Recognition button on the steering wheel.
A
A
By pressing the [ MODE] button on the steering wheel, you
can run the media application on your smartphone as well as
the Radio/Media mode of the system.
A
A
To specify which functions to run when the [ MODE] button
on the steering wheel is pressed, press and hold the [ MODE]
button to display the settings screen.
A
A
By pressing the Call button on the steering wheel, you can
make a call via Bluetooth connection.
A
A
The screen may differ depending on the vehicle model
and specifications.
A
A
Select Use Split Screen at Android Auto screen to show
split screen when using Android Auto.
3 Connect a smartphone to the USB port on the
vehicle by using the provided USB cable.
A
A
When the connection is made for the first time, the system
screen displays a notification window. Check the details
and then press OK.
A
A
To end the Android Auto and disconnect from the
smartphone, remove the USB cable from the system.
ÜCaution
Do not repeatedly connect and remove the USB connector
within a short time. It may cause device errors or system
failures.
4 When the smartphone is locked, unlock it first and
then consent to the use of Android Auto.
When the smartphone is recognized successfully, the Android
Auto menu is activated on the All Menus screen.

2-6
Pairing to an iPhone via Apple CarPlay
After you connect an iPhone to the vehicle with Apple CarPlay,
you can run and control applications on the phone through the
system screen.
1 To use Apple CarPlay, first check the following:
For iPhone models that support Apple CarPlay, visit the
Apple website at https://www.apple.com/ios/carplay
.
Make sure Apple CarPlay and Siri are enabled in your
iPhone settings. If you do not see options for Apple
CarPlay or Siri, update to the latest iOS version.
2 On the All Menus screen, press Setup
>
Device
Connections >
Apple CarPlay and then check
Enable Apple CarPlay.
AA The screen may differ depending on the vehicle model
and specifications.
A
A
Select Use Split Screen at Apple CarPlay screen to show
split screen when using Apple CarPlay.
A
A
When phone projection is active, you cannot change the
phone projection settings. To change the settings, remove the
USB cable from your system.
A
A
The icons on the screen are subject to change according to
the policy of Google Corporation.
A
A
Applications or functions used through Android Auto
are subject to change according to the policy of Google
Corporation. For supportable functions, visit the Android
website at https://www.android.com/auto.
A
A
To use the functions on your smartphone with the minimized
system settings, update the smartphone OS to the latest
version.
A
A
The recognition time may differ depending on the device
type, firmware, and OS version.
A
A
Charges may apply for any mobile data used while Android
Auto is running.
A
A
Some functions may not work properly depending on the
network signal strength.
A
A
Avoid interacting with the smartphone while using Android
Auto.
A
A
You cannot use the following functions when Android Auto is
in use.

USB mode

Apple CarPlay

Searches using the control panel or the steering wheel
remote control

2-7
Using the Apple CarPlay
1 On the All Menus screen, press Apple CarPlay.
2 Perform the desired function.
To run any of functions (phone, messaging, navigation,
etc.) on your iPhone, press the corresponding function
icon.
A
A
When you are using your smartphone′s navigation
via phone projection, sounds from both the system′s
radio/media function and the navigation will be output
through your vehicle′s speakers. When you turn the
Volume knob while both sounds are being output, the
navigation volume is adjusted first.
To run the Siri voice recognition, press and hold the Voice
Recognition button on the steering wheel.
A
A
To display the system Home screen, press
.
A
A
By pressing the [ MODE] button on the steering wheel, you
can run the media application on your smartphone as well as
the Radio/Media mode of the system.
A
A
To specify which functions to run when the [ MODE] button
on the steering wheel is pressed, press and hold the [ MODE]
button to display the settings screen.
A
A
When you receive a call, press the Call button on the steering
wheel to answer it.
A
A
When phone projection is active, you cannot change the
phone projection settings. To change the settings, remove the
USB cable from your system.
3 Connect an iPhone to the USB port on the vehicle
by using the provided USB cable.
A
A
When the connection is made for the first time, the system
screen displays a notification window. Check the details
and then press OK.
A
A
To end the Apple CarPlay and disconnect from the iPhone,
remove the USB cable from the system.
ÜCaution
Do not repeatedly connect and remove the USB connector
within a short time. It may cause device errors or system
failures.
4 When the iPhone is locked, unlock it first and then
consent to the use of Apple CarPlay.
When the iPhone is recognized successfully, the Apple
CarPlay menu is activated on the All Menus screen.

2-9
a Moving direction lines (yellow)
Displays the vehicle’s moving direction based on the
steering angle.
b Neutral steering lines (blue)
Displays the moving direction if you reverse the vehicle in
neutral. Noting these lines, you can determine whether
the vehicle is stopped in correct direction and the
distances to the neighboring vehicles are adequate.
c Collision warning lines (red)
Used to prevent collision.
d Rear top view button (if equipped)
Press the button to display the rear top view.
e Parking distance warning (if equipped)
Depending on the distance to obstacles, the warning
color and alert sound change along with the level (1/2/3)
to notify of the distance.
f Camera image adjustment
Used to adjust the brightness and contrast of camera
images.
g Center
Used to initialize the brightness and contrast of camera
images.
Using the rear-view display
1 Press the “R” (Reverse) button shifter (or move the
shift lever to “R” in a previous vehicle model) with
the vehicle turned on.
The system automatically displays the rear view with parking
assist guidelines.
2 Safely park your vehicle, checking the rear view
and guidelines.
A
A
The example may differ from the actual screen display.
a
a
b
c
def
Type A
a
a
b
c
d
g
f
Type B

2-10
Viewing the rear top view display (if equipped)
You can look down the rear view from the top through the rear-
view display.
1 On the rear-view screen, press .
2 Check the top view display and assist guide lines.
A
A
The guide lines appear on the rear top view.

Displays the space required to open the trunk. After a
parking, check whether the space is sufficient to open
the trunk and there is no obstacle.

Displays the extension line from the center of the
vehicle. According to the steering direction, the moving
direction of the center is displayed on the screen.
A
A
Available settings may differ depending on the vehicle model
and specifications.
A
A
You can change the motion settings of the rear camera. On
the All Menus screen, press Setup >
Display >
Extend Rear
Camera Use and then check Extend Rear Camera Use to
turn on the function. The rear view appears continuously even
when you change the shift position other than “R” (Reverse)
after reversing (if equipped).
A
A
Noting the parking assist guide lines based on the steering,
you can see the moving direction.
AAA warning sound is heard when the vehicle approaches
obstacles while parking. When you set to automatically lower
the audio volume while parking, it can prevent accidents
caused by failure to hear the warning sound. On the All
Menus screen, press Setup >
Sound >
Driving Guidance >

Parking Safety Priority.
> See “Parking Safety Priority.”

2-15
2 Make conversation through the microphone of
the driver’s seat.
A
A
To end the Passenger Talk mode, press End.
A
A
When you move to another screen without pressing End,
shortly press the End Call button on the steering wheel to
end the passenger talk function.
A
A
When the Passenger Talk mode is active, the Radio/Media
functions are unavailable.
A
A
To access the online user’s manual on the Passenger Talk
screen, press Menu >
User's Manual on Web (QR Code) and
then scan the displayed QR code.
Using the Passenger Talk
mode in the rear seat
(if equipped)
When the driver’s voice cannot be delivered well to the rear seat,
you can use the microphone of the driver’s seat for smooth
communication.
1 On the All Menus screen, press Passenger Talk.
The passenger talk icon appears at the top right of the system
screen to display its status.