2021 KIA SEDONA warning

SEDONA FEATURES & FUNCTIONS GUIDE10


Blind-Spot Collision
Warning w/ RCCW Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
(Button panel located left of Steering Wheel)
Blind-Spot Collision Warning (BCW) *†6
The BCW system uses radar sensors to help alert the driver in certain situations if it
detects an approaching vehicle in the driver’s blind spot area before changing lanes
To enable BCW system, go to the User Settings > Driver Assistance > Blind-Spot
Collision Warning To turn BCW on, press the BCW button
A
The system will become active when the vehicle is traveling faster than 20 mph and
will alert the driver if another vehicle is detected by the radar sensor
Blind-Spot Collision Warning (BCW)
1st-stage alert: When another vehicle is detected within the BCW system boundary
B, or a
vehicle approaches at a high speed, a yellow indicator will illuminate on the outside rearview
mirrors
C
2nd-stage alert: When the 1st-stage alert is on and the driver activates a turn signal, a flashing
yellow indicator will illuminate on the outside rearview mirrors and the system will sound an alert
REMINDERS:
•The BCW system will not show a warning if the vehicle speed is only 6 mph above the surrounding vehicles

•If the BCW is turned ON and the ignition is cycled, the BCW system returns to ON
Refer to section 5 in the Owner’s Manual for more information.
Rear Cross-Traffic Collision Warning (RCCW) *†6
If the RCCW system sensors detect approaching vehicles from the rear left or rear right side
of the vehicle D, the system will sound an audible alert, the yellow-flashing indicators on the
outside rearview mirror will illuminate and a message will appear on the LCD screen when
these conditions are met:

• The gear shift is moved into Reverse

• The vehicle is moving slower than 6 mph
To turn the RCCW system on, go to User Settings > Driver Assistance > Rear Cross-Traffic Collision Warning
REMINDERS:

•When vehicle power is cycled, RCCW will remain in the previous state

•When a vehicle is approaching within the sensing range and traveling between 2 5 and 22 mph, the RCCW system will show a warning
Refer to section 5 in the Owner’s Manual for more information. The BCW and RCCW systems are
supplemental systems. Do not
solely rely on these systems and
always pay attention to drive safely.
Images are for illustrative purposes
only and may not reflect actual
feature or operation.
*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
A
B
C
D
DRIVER'S PANEL

ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER11


Lane Departure
Warning Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
When the LDW sensor does not detect the
lane traveling in, the lane is not illuminated When the LDW sensor detects the

lane traveling in, the lane is illuminated
Lane Departure Warning
Lane Departure Warning Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
When the LDW sensor detects the vehicle veering outside of the lane traveling in,
the lane the vehicle is crossing will blink (shown in both images at left)
Lane Departure Warning
Lane Departure WarningLane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning Lane Departure Warning
Lane Departure Warning
(Button panel
located left of
Steering Wheel)
Lane Departure Warning (LDW) *†6
Lane Departure Warning system is designed to detect the lane markers
using a front view camera on the windshield and can warn the driver
when the vehicle starts departing from the lane
With the Engine Start /Stop button in the ON position, press the LDW
button
A to turn the system ON The instrument cluster indicator
will initially illuminate white It will remain white when the vehicle is
traveling slower than 40 mph and the system does not detect the lane
markers When the LDW system detects the lane markers, the LDW
icon will illuminate green
If LDW detects that you are moving outside of your lane, the system
may issue a warning on the LCD screen and an alert may sound
The system will operate under the following conditions:
• The vehicle speed exceeds approximately 40 mph

• The LDW system recognizes the lane the vehicle is traveling in

• The vehicle is between the lane markers
REMINDERS:
• LDW will not issue a warning if the turn signal or hazard signal is activated
• If the LDW system is set on or off and the ignition is cycled, the system returns
to its previous state
Refer to section 5 in the Owner’s Manual for more information. Lane Departure Warning (LDW) is
not a substitute for safe and proper
driving. Always drive safely and use
caution. LDW may not always alert
the driver if the vehicle is driven
outside of its lane.
Images are for illustrative purposes
only and may not reflect actual
feature or operation.
A
DRIVER'S PANEL

SEDONA FEATURES & FUNCTIONS GUIDE12*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Forward Collision-Avoidance Assist (FCA) *†6
FCA is designed to help alert the driver and, under certain conditions, temporarily apply emergency braking when
rapidly approaching a vehicle that is slowing down, braking or stopped Initially, FCA provides Forward Collision
Warning (FCW ) when it detects a potential collision with a vehicle or pedestrian in front, emitting an audible
warning and visual alert on the instrument cluster
If the system detects that the collision risk has increased, FCA automatically applies the brakes to reduce your
speed, potentially helping to reduce the effects of a possible collision
To turn the FCA system on, go to User Settings > Driver Assistance > Forward Collision-Avoidance Assist The alert
settings (Early, Normal, Late) can also be adjusted in the User Settings
FCA / FCW will become active when the:
• Engine Start /Stop button is ON
• Vehicle is traveling faster than approximately 6 mph
• Electronic Stability Control (ESC) is ON
Manual Folding Mirrors *
To fold the mirrors in manually, pull the mirror
towards the window
REMINDERS:
• FCA / FCW will be activated by default when vehicle power is cycled on, even when previously set to off
• FCA / FCW will not operate when the vehicle is traveling faster than approximately 50 mph
• If FCA is operating and the ESC (Electronic Stability Control) is tu rned off, the FCA system is automatically turned off
• When FCA is off, the FCA warning indicator is on in the Instrument Cluster
Refer to section 5 in the Owner’s Manual for more information. Forward Collision-Avoidance Assist
(FCA)* / Forward Collision Warning
(FCW)* are not substitutes for safe
and proper driving. Always drive
safely and use caution. FCA / FCW
may not always alert the driver
when the vehicle is approaching
another vehicle.
Images are for illustrative purposes
only and may not reflect actual
feature or operation.


Forward Collision-
Avoidance Assist Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
If needed, pull the mirror firmly until it folds
QUICK TIP
Refer to section 4 in the Owner’s Manual for more information.
DRIVER'S PANEL

13ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED
(Button located left of
Steering Wheel)
Power Windows, Window Lock & Central Door Lock
A Pull/Press to operate Front Windows Auto Up/Down*
B Press to Unlock /Lock All Doors
C Press to disable Rear Passenger Windows and Rear Sunroof* passenger controls
REMINDER: When C is pressed, window controls for the Rear Passenger Windows are disabled

Refer to section 4 in the Owner’s Manual for more information.
Power Folding Outside Mirrors *
Press the L or R buttons D to select the mirror to adjust
Press button arrows
E left /right or up/down to adjust mirror position
Toggle button
F left /right to unfold/fold the outside rearview mirrors
Toggle button
F to center to automatically fold/unfold mirrors when:

• The Smart Key* Lock /Unlock buttons are pressed

• The door outside handle button is pressed

•

•Auto Door Lock /Unlock* will engage when the gear shift is moved into or out of the P (Park) position

•To turn Auto Door Lock /Unlock* OFF, go to User Settings* in the LCD Instrument Cluster modes
QUICK TIPS

•

•The mirrors will automatically unfold when the Smart Key* is within close proximity to the vehicle

•To automatically fold mirrors when exiting vehicle, press the LOCK button once on the Smart Key*
QUICK TIPS


Press button again to stop Auto Up/Down function QUICK TIP
Power/Heated Outside Mirrors*
Mirror heaters automatically turn ON/OFF at the same time
the Rear Window Defroster is turned ON/OFF The Rear
Window Defroster button* is located on the climate control
system panel
Refer to section 4 in the Owner’s Manual for more information.
Automatic Door Lock/Unlock
When the gear shift is moved into or out of P (Park), all doors
will Lock /Unlock Refer to the User Settings on how to turn
Auto Door Lock /Unlock ON/OFF
Refer to section 4 in the Owner’s Manual for more information.
Fuel Filler Lid Release Button
Press the Fuel Filler Lid Release button
to release the fuel door
Refer to section 4 in the
Owner’s Manual for more
information..
REMINDER:
To lock position of mirrors, toggle switch to the neutral (center) position
Refer to section 4 in the Owner’s Manual for more information.
A
B
F
CE
D
D
(Button/switch panel located on Driver’s Door )
Button configuration may vary depending on vehicle model.
DRIVER'S PANEL

15ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Headlight position
Parking light position
AUTOAuto Light* / HBA*
OFFOFF position
It may be helpful to pull/push the bottom of the
Steering Wheel towards/away from you to adjust the
desired distance prior to adjusting the angle
QUICK TIP
REMINDERS:
•HBA will operate when vehicle speed exceeds 25 mph
•
If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams will be on continuously
If the lever is pulled toward you while HBA is operational, HBA will turn off

•
If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
Tilt/Telescoping Steering Wheel†2 5
To adjust the Steering Wheel, press the Lock-
Release Lever A down and adjust B to the
desired angle and C distance
When finished, pull the Lock-Release Lever
A
up to lock the Steering Wheel in place
Headlights & High Beams
To o p e r a t e :

• Rotate the switch to change
the Headlight function

• Push the lever to turn High Beams ON

• Pull the lever to flash Headlights /
High Beams
AUTO Light function* — When the light switch is in the AUTO Light position, the tail lights and
headlights will turn ON/OFF automatically depending on the amount of light outside the vehicle
High Beam Assist (HBA)* — The High Beam Assist is designed to automatically adjust the headlight
range by switching between high and low beams based on light detected from oncoming vehicles and
road conditions
To enable HBA, toggle the light switch to the AUTO Light position and turn on the high beams by
pushing the lever away from you The High Beam Assist indicator
will illuminate

Refer to section 4 in the Owner’s Manual for more information.
Refer to section 4 in the Owner’s Manual for more information.A
B
C
STEERING WHEEL CONTROLS

17ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
(Type B shown)
Cruise Control†2 3
A CRUISE Control ON/OFF butt on: Press to turn the Cruise Control ON/OFF
(CRUISE indicator will illuminate on the Instrument Cluster when ON)
B Resume Cruising Speed button: Press up to resume or increase the
cruising speed
Set Cruising Speed button: Press down to set or decrease the cruising speed
C Cruise Control CANCEL button: To cancel the Cruise Control setting, do one of the following:

• Press the brake pedal

• Press the CANCEL but ton


•Cruise Control is designed to function above 20 mph

•The Cruise Control system will not activate until the brake pedal has been depressed
at least once after ignition ON or engine start
QUICK TIPS
REMINDER: Cruise Control is a part of Smart Cruise Control with Stop and Go* and can be set as the operating mode To switch
from Smart Cruise Control (SCC) to Cruise Control, press and hold the CRUISE button A (the SCC system must not be activated
to change modes) Repeat to switch back to SCC mode

Your vehicle’s steering wheel buttons may differ from those in the illustrations.
Refer to section 5 in the Owner’s Manual for more information.
A
B
C
STEERING WHEEL CONTROLS

AUDIO SYSTEMS
19ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
STEERING WHEEL CONTROLS
Smart Cruise Control (SCC)
with Stop & Go System *
†6,23 (continued)
The SCC system is a supplemental system and is not a substitute for safe driving. It is the
responsibility of the driver to always check the speed and distance to the vehicle ahead.
Refer to section 5 in the Owner’s Manual for more information.


To change the Cruise Control mode from SCC to standard Cruise Control,
press and hold CRUISE button
A (see previous page) Repeat to switch
modes again ( The SCC system must not be activated to change modes)
For the SCC System to operate:

•When no vehicle is in front, you must be traveling at a minimum speed
of 20 mph

•When following a vehicle, there is no minimum speed requirement
When following a vehicle, the system will automatically adjust your cruise
speed based on the vehicle detected in front It may even bring the vehicle
to a complete stop if necessary
QUICK TIPS
REMINDERS:

•
When the ignition is cycled, the SCC is turned on, which is the default setting The speed
setting will need to be reset when ignition is cycled

•
If the SCC system is left on, it can be activated inadvertently Keep the system off when
not in use to avoid setting a speed that the driver is not aware of

•
In standard Cruise Control, the driver needs to manually assess the distance from other
vehicles as the system will not apply brakes to slow down automatically in order to turn
SCC ON/OFF

•
The SCC is also canceled when the driver’s door is opened, gear shift is changed out of
D (Drive) and various other conditions See Owner’s Manual for other conditions
Audio Controls†2 3
A Audio MODE button: Press to cycle through the FM/AM/SiriusXM®*†20
Media Modes; Audio System ON/OFF: Press to turn the power on
B Seek/Track button:
FM/AM/SiriusXM
®* Modes: Press up/down to advance through Preset
Stations Press and hold to auto seek
Media Modes: Press up/down to move the track up/down Press and hold
to fast forward/rewind (except for Bluetooth
® Audio)
C Volume button: Press up/down to raise/lower the volume
Mute button: Press to mute all audio
Driving while distracted is dangerous and should be avoided. Drivers should remain attentive
to driving and always exercise caution when using the steering-wheel-mounted controls
while driving. For further audio system operation, refer to pages 22-26.
Your vehicle’s steering wheel buttons may differ from those in the illustrations.
Refer to section 4 in the Owner’s Manual for more information.
A
BC

21ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER


Voice Recognition
Tips Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
Voice Recognition* and Phone Contact Tips
The system may have difficulty understanding
some accents or uncommon names Improve
the performance by making a few simple
changes to your phone contacts, listed below
To help optimize the Bluetooth Wireless
Technology Voice Recognition system, see
other tips and reminders under Quick Tips

• Use full names (first and last names) vs
short or single-syllable names (“John Smith”
vs “Dad,” “Smith Residence” vs “Home”)

• Avoid using special characters, emojis or
hyphenated names (@, &, #, /, -, *, +, etc )

• Avoid using acronyms (“In Case of
Emergency” vs “ICE”) or words with all
capital letters

• Spell words completely, no abbreviations
(“Doctor Smith” vs “Dr Smith”)
Bluetooth® Wireless Technology *†5,23 (continued)
Pairing a Phone
For instructions on how to pair a phone, refer to the audio system’s
user’s guide or your vehicle’s Quick Start Guide

How to Place a Call
Below are methods for placing a call using the Steering Wheel controls:
When using the voice command feature*, waiting for the system BEEP
before speaking the command

• Option 1: Press the Receive/Place Call button
C (displays the phone
screen with call history)

• Option 2: Press the Talk button*
A Then say the command
“Call {name}” or “Dial {number}” followed by contact name or number


During the pairing process, be sure to accept the connection requests on the
phone for phone book download and to allow acceptance of all future
Bluetooth
® connection requests
QUICK TIP
For more information, refer to the Car Multimedia System User’s Manual.
• Bluetooth® Music Streaming – If the Bluetooth® music is inaudible or too low, you
may need to turn up the volume on the connected phone
• When placing a call, speak in a natural, moderate tone, with clear pronunciation The
system may have trouble recognizing commands if you speak too softly or too loudly
• Always wait for the beep before speaking any commands
• Close windows and sunroof and turn off A /C Open windows, sunroof, weather (wind/
rain), or an A /C fan operating at higher speeds can interfere with Voice Recognition
• Press the talk button and say “Help” to get a list of available commands
QUICK TIPS
STEERING WHEEL CONTROLS