47ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Smart Power Liftgate *†21 (continued)
HOLDHOLD
HOLD
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information
Smart Power Liftgate
Video
Power Liftgate Opening
Height Adjustment VideoQR CODE
www.youtube.com/KiaFeatureVideos
• During the Smart Power Liftgate alert, the Smart Power Liftgate can be
deactivated with the Smart Key by pressing any button on the key fob
• The open height can be adjusted For information on how to set the open
height, see page 43 or your Owner’s Manual
QUICK TIP
REMINDERS:
•All doors are closed and locked after about 15 seconds
•If the POWER DOOR OFF button is depressed, the Smart Power Liftgate will not operate
•
The Smart Power Liftgate feature will not operate when the doors are recently closed and
locked, and the Smart Key is still detected after 15 seconds near the vehicle or within 60
inches of the door handles, a door is not locked or closed or the Smart Key is in the vehicle
•
Press any button on the Smart Key fob during the Detect and Alert stage to deactivate the
Smart Power Liftgate function
•Ensure obstacles and people are out of the way of the Liftgate
Smart Key:
To open the Smart Power Liftgate*, press and hold the Smart key Liftgate
button
A until the Liftgate begins opening Press again to close
REMINDER: Pulling the Liftgate upward by the handle or pressing the button a second time
will interrupt the automatic opening of the Smart Power Liftgate
Smart Power Liftgate*
When the Smart Key fob is on your person and you are near the back of
the vehicle, within close proximity, the hazard lights will blink and a chime
will sound for about 3 seconds as an alert that the Smart Power Liftgate*
is about to open
Then the alert system will blink and chime two additional times before
opening the Smart Power Liftgate*
B
The Smart Power Liftgate* feature is OFF by default To enable the Smart
Power Liftgate*, go to User Settings in the LCD Instrument Cluster modes
Refer to section 4 in the Owner’s Manual for more information.
A
B
OTHER KEY FEATURES
SEDONA FEATURES & FUNCTIONS GUIDE50*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
HomeLink® with Auto-Dimming Rearview Mirror *†12
A HomeLink® button
B HomeLink® button
C Indicator light
D HomeLink® button
E Glare detection sensor
F Automatic dimming ON
G Automati c dimming OFF
HomeLink
® with Auto-Dimming Rearview Mirror* is designed
to reduce glare from a vehicle’s headlights located in the rear
and also to connect up to three electronic transmitters into
one location
•
To turn automatic dimming ON, press
button F
•
To turn automatic dimming OFF, press
button G
REMINDER: Mirror indicator light C will illuminate when automatic dimming
is ON
•
•You can reprogram a single HomeLink® button by repeating
Step 2
•Erasing programmed buttons will delete all trained transmitters
QUICK TIPS
How to Sync Transmitter with HomeLink®*
If programming for the first time, begin with Step 1
(repeating this step will delete all information)
To program non-rolling and rolling code garage door
openers and other devices:
1 Press and hold the left
A and center E buttons
simultaneously until the indicator light C begins to
flash (to reprogram buttons, skip this step)
2 Press and hold the desired button
A, B or D
and hold the button on the transmitter while it is
approximately 1 to 3 inches away from the mirror The
HomeLink
® Indicator light C will flash rapidly once the
frequency signal has been successfully programmed
To finish programming rolling code garage door openers,
complete these steps:
3 Locate the “learn” or “smart” button on the garage door’s motor head unit Press and
release the button and complete Step 4 within 30 seconds
4 Firmly press and release the programmed HomeLink
® button up to three times
Operating HomeLink
®:
Press one of the programmed HomeLink
® buttons
Erasing programmed buttons:
Press and hold the left
A and center D buttons simultaneously for approximately
20 seconds, and then release both buttons within 30 seconds
If your garage door opener was manufactured in 2011 or later, and you’re unable to program your vehicle’s
HomeLink® system, you may need to purchase a HomeLink® Repeater Kit. For more information, go to
www.HomeLink.com or call (800) 355-3515, or refer to section 4 in the Owner’s Manual.
HomeLink Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
OTHER KEY FEATURES
ABFGCED
