2021 INFINITI QX80 display

25
Around View® Monitor with Moving Object Detection
• With the ignition switch in the ON position, activate the Intelligent Around View® Monitor by pressing
the
CAMERA button , located on the control panel, or by moving the shift lever to the
R (Reverse) position. The monitor displays various views of the position of the vehicle.
MOVING OBJECT DETECTION (MOD) (if so equipped)
• The MOD system helps inform the driver of moving objects around the vehicle.
• The system will operate when the shift lever is in the D (Drive), N (Neutral), R (Reverse) or P (Park)
position and the vehicle is driven at speeds of approximately 5 mph (8 km/h) or less.
• If the MOD system detects moving objects, a yellow frame will be displayed on the camera image.
• When the following is displayed:
• Green MOD icon ; the system is active.
• White MOD icon; the system is not active.
• No MOD icon; the system is off. The indicator will also be off if all of the warning systems are
deactivated using the Settings menu.
• The MOD system will not operate if the liftgate is open.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information.

26
Lane Departure Warning (LDW)
(if so equipped)
Lane Departure Warning (LDW) warns you if the vehicle is beginning to leave
the traveling lane.
• LDW is activated at speeds of 45 mph (70 km/h) and above
and the lane markings are clear.
• If a front wheel passes over a lane marking, LDW will warn
you through a visual alert
and an
intermittent vibration in the steering
wheel for up to 1.5 seconds.
• The Warning Systems switch is located
in the lower switch bank.
TURNING LANE DEPARTURE
WARNING ON OR OFF
1. Push the MENU button and touch “Driver
Assistance” on the lower display.
2. Touch “Blind Spot Assist”.
3. Touch “Blind Spot Warning” to turn Lane Departure
Warning ON or OFF.
Please see your Owner’s Manual for important safety information, system limitations, and additional
operating and feature information.
Hill Start Assist
The Hill Start Assist system allows time for the driver to
release the brake pedal and apply the accelerator when
the vehicle is parked on a hill. The brakes are applied
automatically for 2 seconds after the driver releases the
brake pedal.
• The Hill Start Assist system will operate automatically
under these conditions:
• The shift lev er is shifted into a
forward or a reverse gear.
• The vehicle is stopped completely on a hill by applying
the brake.
• The Hill Start Assist system will not operate when the
shift lever is in the N (Neutral) or
P (Park) position or
when the vehicle is on a flat and level road.
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.

27
Predictive Forward Collision
Warning (PFCW)
The Predictive Forward Collision Warning (PFCW) system uses
a sensor in front of the vehicle to analyze the distance and
speed of the vehicle ahead.
• The PFCW system operates above speeds of
3 mph (5 km/h).
• If there is a risk of a forward
collision, a warning to the driver by
flashing indicator will appear
,
along with an audible alert.
TURNING PREDICTIVE FORWARD
COLLISION WARNING ON OR OFF
1. Press the MENU button
below the lower display.
2. Touch the “Driver Assistance” key
on the lower display.
3. Touch the “Emergency Assist” key
4. Touch the “Emergency Braking”
key to turn system on or off.
• A warning light will illuminate
when the system is off. The PFCW system automatically
turns back on when the engine is restarted.
Please see your Owner’s Manual for important safety information, system limitations,
and additional operating and feature information.
The I-BI system can help alert
the driver of an approaching
vehicle or objects behind the
vehicle when backing out of
parking spaces.
• I-BI system will turn
on when the shift lever
is in reverse and the
vehicle speed is less than
5 mph (8 km/h).
• Warning chimes and the
indicator light located near the outside mirrors will
illuminate and indicators will appear on the touch screen
display
.
TURNING INTELLIGENT BACK-UP INTERVENTION
(I-BI) ON OR OFF
1. Press the MENU button
below the lower display.
2. Touch “Settings” and then touch “Camera”
on the lower display.
3. Touch “Camera”
4. Touch the “BCI” key to turn the system ON or OFF.
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
Back-Up Collision Intervention
(BCI) (if so equipped)