2021 GENESIS G80 key

160
Making Phone Calls
swiT ching KeYpad
Switching to ARS number entrance screen during a phone conversation is available.
1. Press [Keypad] during a phone conversation.
2. Press [Keypad] to switch back to phone call screen.

175
System Settings
sYsTem seTTings
seTTings screen composiTion
Press [Setup] > [Menu] on the home screen.
Display Off
Turns off the screen.
Search Setup
Enter menu name or settings keyword.
Reorder
Moves setup menu up/down to reorder.
Split screen
Displays split screen selection menu.

186
Device Connection settings
auTo connec Tion prioriTY
You can automatically connect Bluetooth device by priority at startup.
You can change the set priority by long pressing the desired bluetooth device.
Also, you can change the set priority by pressing the touchpad on front seat control key.
In the Bluetooth settings screen, press [Auto Connection Priority].

199
Vehicle settings
door
1. Press [Door] on the vehicle settings screen.
2. Press the desired item.
䠐[Auto Lock]: Select the timing for automatic locking all doors.
䠐[Auto Unlock]: Select the timing for automatic unlocking all doors.
䠐[Walk Away Lock]: All doors will lock when the smart key is no longer nearby.
䠐[2 Press Unlock]: Press door unlock button of the key to unlock all doors.
䠐[Power Trunk]: The power trunk button can be used to automatically open/close the
trunk.
䠐[Power Trunk Opening Height]: Selects the height the power trunk automatically moves.
䠐[Smart Trunk]: Opens the trunk automatically when approaching the trunk with the
smart key.

200
Vehicle settings
digiTal KeY
1. Press [Digital key] on the vehicle settings screen.
2. Press the desired item.
䠐[Enable Digital Key]: Unlocks doors and turn vehicle on using a digital key.
䠐[Smartphone Key]/[Card Key]: Saves or deletes smartphone key or card key.
䠐[Digital Key Information]: Shows the serial number of the digital key.

220
Connected Settings
connecTed seTTings
serVice a cTiV aTion
After you buy your car, you need to activate (register for) Genesis connected services to use
any Genesis connected services features, including calendar and vehicle diagnostics.
1. Press [Connected Services] > [Activate Connected Services] on the home screen.
2. Press [Activate].
,no Te
䠐Activation may take up to five minutes.
䠐Do not turn the engine off while activation is in progress.
䠐If activation fails, contact your service partner or an authorized Genesis partner.
䠐During service activation, the hard keys in the head unit do not work.

229
General settings
KeYboard
This menu is used to change the type of keyboard used within the system for each language.
The set keyboard will be applied to all input modes across the entire system.
1. On the general settings screen, press [Keyboard].
2. Press the desired item.
,noTe
When you adjust the angle of handwriting and touch gesture recognition based on
individual posture, Press [Touchpad Recognition].
uniT
This menu is used to change the type of unit used within the system.
1. On the general settings screen, press [Unit].
2. Press the desired item.

242
Using Voice Recognition System
sTar Ting V oice recogniTion
1. Press the [i] button on the steering wheel remote control.
2. Say the desired voice command after the beep sound.
,noTe
䠐For proper recognition, please say the command after the voice instruction and beep
sound.
䠐When starting voice recognition, the voice command entry window with four
representative commands is displayed.
䠐If voice recognition is in [Beginner], then the system will provide the detailed voice
recognition guidance. If voice recognition is in [Standard], then the system will provide
the simple version of voice recognition guidance. If voice recognition is in [Expert], then
you will only hear a beep.
sKipping prompT messages
While a prompt is playing, press the [i] button on the steering wheel remote control quickly.
The prompt is immediately ended and a beep will sound.
After the beep, please say the voice command.
re-s Tar Ting V oice recogniTion
While the system waits for input, press the [i] button on the steering wheel remote control
quickly.
The beep tone will sound, indicating the system is listening for a new input.
Say a voice command.
ending Voice recogniTion
䠐While voice recognition is operating, press and hold the [i ] button on the steering wheel
remote control, or say "Exit".
䠐While using voice recognition, pressing other button except on the steering wheel remote
control or a different button on head unit will end voice recognition.
adjusTing V oice recogniTion V olume
While voice recognition is operating, turn [:/VOL] the wheel up/down on the front seat
control key or press [J/I] on the steering wheel remote control.