2021 GENESIS G80 Getting Started Guide

ONLINE RESOURCES AND INFORMATION AT MYGENESIS.COM9
Main menu
HERE ARE A FEW COMMON VOICE COMMANDS TO USE AFTER
YOUR PHONE HAS BEEN PAIRED:
“Help” provides guidance on commands that can be used within the
current function.
Say “Call” to initiate a call followed by saying the name of the saved
contact with whom you wish to speak. For example: “Call John Smith.”
“Dial” makes a call by dialing the spoken numbers.
For example: “Dial 1-800-633-5151.”
To enable voice command,
press the ‘Push to Talk’ button
located on the steering wheel.
Note
Compatibility and performance may vary based on your phone, the phone’s software,
and your wireless carrier.
COMMON VOICE COMMANDS
MAKING A CALL

ONLINE RESOURCES AND INFORMATION AT MYGENESIS.COM10
Main menu
1.
4. 3.
Select either the recommended or
alternate route. The destination route
will display on the screen and route
guidance will begin.
The results will be listed on the screen.
Say the line item number
(for example: “Three”) to make
your selection.
Press the ‘Push to Talk’ button located
on the steering wheel.
You will hear “Please say a command,”
followed by a beep. After the beep,
say the command “Find Coffee Shop.”
Press the ‘Push to Talk’ button
located on the steering wheel and say
“Cancel Route” to stop route guidance.
FINDING A DESTINATION USING VOICE COMMANDS
NAVIGATION
2.

ONLINE RESOURCES AND INFORMATION AT MYGENESIS.COM11
Main menu
The vehicle must be in ‘Park.’*
Press the ‘Nav’ button.
**
*Manual destination input is only available when the vehicle is in ‘Park.’
**Button location may differ from the image shown.
4. 3.
2. 1.
Select ‘Search.’
Enter the address of your destination
or the name of your POI and press
the ‘Search’ icon.
The route to your destination will
be displayed on the map.
Select ‘Set as Destination’ to
begin your route.
5.
Press the ‘Push to Talk’ button
located on the steering wheel and
say “Cancel Route” after the prompt
to stop route guidance.
INPUTTING A DESTINATION
NAVIGATION

ONLINE RESOURCES AND INFORMATION AT MYGENESIS.COM12
Main menu
*The display, button, and/or icon locations may differ from the images shown.
HERE ARE A FEW COMMON VOICE COMMANDS
AVAILABLE TO USE:
“Help” provides guidance on commands that can be used within the
current function.
Say “Find

ONLINE RESOURCES AND INFORMATION AT MYGENESIS.COM13
Main menu
Select a category to see a list of
commands that are available to use.3. Press the ‘Push to Talk’ button.
Select ‘Help’ on the lower left corner
of the screen.
1.
2.
D yNAMIC VOICE RECOGNITION
Your Genesis is equipped with Dynamic Voice Control, which allows you to use
voice commands to control your vehicle’s windows, climate, radio, navigation,
and more. Additional POI and Internet search functions are available with a
GCS subscription. To explore these commands, follow the instructions below.

ONLINE RESOURCES AND INFORMATION AT MYGENESIS.COM14
Main menu
Genesis Voice Recognition:
Press the ‘Push to Talk’ button
and say a command.
Follow these simple instructions to toggle between your vehicle’s voice
recognition and Android Auto’s or Apple CarPlay’s voice recognition.
Android Auto or Apple CarPlay:
First, make sure your phone is connected to Android Auto or Apple CarPlay.
Then hold down the ‘Push to Talk’ button until prompted by Android Auto or
Apple CarPlay to provide a command.
DUAL VOICE RECOGNITION
ANDROID A UTO APPLE CARPLAy

ONLINE RESOURCES AND INFORMATION AT MYGENESIS.COM15
Main menu
2. 1.
4. 3.
Checking ‘Display Traffic’ will show
traffic conditions on your map .
Tap ‘Menu’ in the lower left corner.
Press the ‘Map’ button.
Select ‘Navigation Settings’

to modify additional settings.
MAP DISPLA yS
Customize the way that your Genesis displays maps by
following the steps below.

ONLINE RESOURCES AND INFORMATION AT MYGENESIS.COM16
Main menu
6.5.
Select ‘Display,’

then select ‘Map.’
Select each category on the
menu to set your map preferences.
MAP DISPLA yS