5. Train the tire pressure monitoring
system sensors in the tires using the
following system reset sequence
starting with the left front tire in the
following clockwise order: Left front -
driver side front tire, Right front -
passenger side front tire, Right rear -
passenger side rear tire, Left rear -
driver side rear tire.
6. Remove the valve cap from the valve stem on the left front tire. Decrease the
air pressure until the horn sounds.
Note: The single horn tone confirms that
the sensor identification code has been
learned by the module for this position. If a
double horn is heard, the reset procedure
was unsuccessful, and you must repeat it.
7. Remove the valve cap from the valve stem on the right front tire. Decrease
the air pressure until the horn sounds.
8. Remove the valve cap from the valve stem on the right rear tire. Decrease the
air pressure until the horn sounds.
9. Remove the valve cap from the valve stem on the left rear tire. Decrease the
air pressure until the horn sounds.
Training is complete after the horn
sounds for the last tire trained, driver
side rear tire, the system indicator
stops flashing, and a message shows
in the information display.
10. Turn the ignition off. If two short horn
beeps are heard, the reset procedure
was unsuccessful and you must
repeat it. If after repeating the
procedure and two short beeps are
heard when the ignition is turned to
off, seek assistance from your
authorized dealer. 11.
Set all four tires to the recommended
air pressure as indicated on the
Safety Compliance Certification
Label, affixed to either the door hinge
pillar, door-latch post, or the door
edge that meets the door-latch post,
next to the driver seating position or
Tire Label located on the B-Pillar or
the edge of the driver door.
CHANGING A ROAD WHEEL (IF
EQUIPPED) WARNING:
If the tire pressure
monitor sensor becomes damaged it
may not function.
Note: You should only use tire sealants in
roadside emergencies as they may cause
damage to the tire pressure monitoring
system sensor.
Note: The tire pressure monitoring system
indicator light illuminates when the spare
tire is in use. To restore the full function of
the monitoring system, all road wheels
equipped with tire pressure monitoring
sensors must be mounted on the vehicle.
If you get a flat tire when driving, do not
apply the brake heavily. Instead, gradually
decrease your speed. Hold the steering
wheel firmly and slowly move to a safe
place on the side of the road.
Have a flat serviced by an authorized
dealer in order to prevent damage to the
tire pressure monitoring system sensors.
See
Tire Pressure Monitoring System
(page 263). Replace the spare tire with a
road tire as soon as possible. During
repairing or replacing of the flat tire, have
the authorized dealer inspect the tire
pressure monitoring system sensor for
damage.
268
Explorer (CTW) Police, Canada/United States of America, Police, enUSA, Edition date: 202007, Second-Printing Wheels and Tires
Information Contained on the Tire
Sidewall........................................................... 250
Police Wheels and Tires................................. 260
Temperature A B C............................................ 248
Traction AA A B C.............................................. 248
Treadwear............................................................ 248
Tire Pressure Monitoring System...........263 Changing Tires With a Tire Pressure
Monitoring System....................................... 264
Understanding Your Tire Pressure Monitoring System ...................................... 264
Tires See: Wheels and Tires..................................... 246
Towing a Trailer.............................................185
Load Placement................................................. 185
Towing the Vehicle on Four Wheels..........................................................190
Emergency Towing............................................ 190
Recreational Towing......................................... 190
Towing..............................................................185
Traction Control
............................................156
Principle of Operation....................................... 156
Transmission..................................................142
Transporting the Vehicle...........................199
U
Under Hood Overview - 3.0L..................220
Under Hood Overview - 3.3L....................221
Unique Driving Characteristics................123
USB Port.........................................................306 Locating the USB Ports.................................. 306
Using All-Wheel Drive
.................................144
Driving In Special Conditions With
All-Wheel Drive (AWD)............................... 146
How Utility Vehicles Differ from Other Vehicles............................................................. 146
Operating AWD Vehicles With Mismatched Tires.................................................................... 146
Using Snow Chains......................................261
Using Stability Control...............................158
Using SYNC™ With Your Media Player
.............................................................314
Audio Voice Commands.................................. 315
Media Sources..................................................... 314
Using SYNC™ With Your Phone.............310 Accessing Features through the Phone
Menu.................................................................... 311Pairing a Phone...................................................
310
Phone Controls..................................................... 311
Phone Voice Commands................................. 310
Using Traction Control................................156 Switching the System Off............................... 156
System Indicator Lights and Messages.......................................................... 156
Using a Switch..................................................... 156
Using the Information Display Controls............................................................. 156
Using Voice Recognition...........................308 Initiating a Voice Session............................... 308
System Interaction and Feedback.............309
Utilizing the Mediation/Arbitration Program (Canada Only)........................204
V
Vehicle Care
...................................................238
General Information......................................... 238
Vehicle Identification Number................279
Vehicle Storage
.............................................243
Body........................................................................\
243
Brakes.................................................................... 244
Cooling system................................................... 244
Disconnecting Your 12 Volt Battery.............244
Engine ..................................................................... 243
Fuel system.......................................................... 244
General.................................................................. 243
Miscellaneous..................................................... 244
Plugging in Your HYBRID................................ 244
Removing Vehicle From Storage.................244
Tires........................................................................\
244
Ventilation See: Climate Control.......................................... 101
VIN See: Vehicle Identification Number............279
Voice Control...................................................66
W
Warning Lamps and Indicators.................79 Anti-Lock Braking System................................. 79
Battery...................................................................... 79
Blind Spot Monitor............................................... 79
Brake System Warning Lamp.......................... 79
Cruise Control....................................................... 80
Deep Snow and Sand........................................ 80
408
Explorer (CTW) Police, Canada/United States of America, Police, enUSA, Edition date: 202007, Second-Printing Index