2021 AUDI Q2 display

Navigation
- automatic: The route is automatically
opti­

mised using the current traffic information. If
the MMI system does not display
a
detour route
although the automatic traffic avoidance func­
tion is on and a traffic jam has been reported
on the planned route, this is because the
esti­

mated time required for the detour is longer
than the delay on the route with the traffic jam.
- manual: The MMI indicates that
a
better route
is available and informs you of the potential
time saving
^>page
226. You can then choose
which route you would like to use.
- off: The route is not updated automatically. No
optimised route is suggested.
(2) Motorways/ (f) Vignette roads1)/ (4) Toll
roads/(?)
Ferries1)/©Motorail1);
If
you
do not
wish
for
the navigation system to include motor­

ways,
vignette/toll roads, ferries or car trains
when calculating the route, you can select the
option avoid.

(7)
Time restricted
-
avoid:
Roads that are closed at certain times of
the day (e.g. pedestrian zones) are excluded
from the route calculation.
- automatic: The MMI system determines wheth­
er the restricted road can be included in the
route calculation based on the time tables cur­
rently stored in the navigation data.
- with: Roads that are closed at certain times of
the day are included in the route calculation.

(§)
Seasonally restricted1)
-
avoid:
Roads that are closed seasonally (e.g.
mountain passes) are excluded from the route
calculation.
- automatic: The MMI system determines wheth­
er the seasonally restricted road can be
inclu­

ded in the route calculation based on the time
tables currently stored in the navigation data.
-
with:
Roads that are closed seasonally are in­
cluded in the route calculation.
Voice guidance
Applies to: vehicles with navigation system

»•
Press the |NAV/MAP| button repeatedly until
the Enter destination menu is displayed

^page
207, Fig. 172.

•
Select: right control button
>
Voice guidance.
Voice guidance: The navigation cues can be
played in complete or compact form. You can use
the traffic option to have the system play only
those announcements on traffic obstructions
that are relevant
for
your route. SeLect off if you
do not want the system to play any navigation

cues.

Voice guidance during calls: Navigation cues
during a telephone call can be switched on/off.
Entertainment fader: Refer to
•=>page
261.
Volume of spoken cues: You can change the
vol­

ume of
a
spoken cue while it is being played us­
ing the ON/OFF button
opage
152. Further in­
formation can be found on
^>page
261.

11
This function is not available in the Mexican market.
218

Navigation

CO
< o rN
IV
rN
t-H
o <
00
Map
How to
use
the map

Applies
to: vehicles with navigation system
H

an^fc Hetnuc'ijlo

'
in
1,2 km
Blaubach
in
1,0
km
Autobahn-Flugh

Fig.
181 Example: Standard map with crosshairs switched

off

Aachen
AlexanderstraBe Komphausbad da n se m an n pi
a

Fig.
182 Example: Standard map with crosshairs switched

on

•
Press the |NAV/MAP| button repeatedly until
the map is displayed
^Fig.
181.
Zooming in/out on map
- Turn the rotary pushbutton clockwise or
anti­

clockwise. You can also zoom in or out on the
map using the MMI touch
pad*
^>page
157. Or:
Scroll the left thumbwheel on the multi-func­
tion steering wheel*
^>page
16.
Switching the crosshairs on/off
- To switch on the crosshairs: Press the rotary
pushbutton while the map is displayed

^Fig.
181.
- To switch off the crosshairs: Press the |BACK|

button.

With the crosshairs switched off
•=>
Fig.
181:

(l)
Orientation: The map is displayed either in
the 2D north
or
the 2D driving position per­
spective.

1J
Applies to vehicles without camera-based speed limit
dis­

play
only
(2) Distance to the destination
(D When the trailer mode function is switched
on
[vj,
a corresponding symbol is shown next
to the arrival time.
(4) Scale: Turn the rotary pushbutton clockwise/
anti-clockwise to zoom in or out. When the
Automatic zoom function is switched on
(vf,

an "A" for "automatic" is shown in the zoom

symbol.

(D Altitude
(?) Location of the vehicle
(7) Route information: Various information is
displayed during route guidance (e.g. the up­
coming manoeuvre including the calculated
distance and road name). Traffic information
or special destinations on your current route
are also displayed.
(D Road the vehicle is currently on. When the
vehicle is stationary, "offroad" is displayed

here.

With the crosshairs switched on
^>Fig.
182:
(9) The crosshairs: Move the crosshairs in the de­
sired direction using the MMI touch padVro-
tary pushbutton and select an item on the
map as the destination. Alternatively, have
information displayed on the map item.
© Speed display1); Display of the maximum
speed limit on motorways, dual carriageways
and other major roads.
© Entertainment drawer*: Refer to
^page
157.
© Additional information on the position of the
crosshairs: If
you
move the crosshairs onto a
point on the map, any existing information
on the current position of the crosshairs will
be displayed. Press the rotary pushbutton to
call up the destination details or start route
guidance. If the crosshairs are switched off,
the road you are currently on will be dis­

played.

© Map content (special destinations, favour­

ites).
If several special destinations are loca­
ted close to each other, their symbols are
stacked on the map.
219

Navigation
© Better route
If
a
better route is available
for the current route guidance, this will be
shown on the map together with the time

saved.
Further information can be found
from
^>page
226 onwards.
Further options on the map
Applies to: vehicles with navigation system
©
Whether the level of congestion is taken into
account when the route is being calculated
depends on your traffic avoidance settings

<=>
page 217.
Map functions
Applies to: vehicles with navigation system

•
Press the |NAV/MAP| button repeatedly until
the map is displayed
•=>page
219, Fig. 181.

•
Press the left control button.
The following map functions are available:
Switch to destination entry
The search function must be displayed in the En­
ter destination menu
•=>page
207, Fig. 172.
Traffic announcements
Up-to-date traffic information is shown on the in­
fotainment display. Further information can be
found from
^page
225 onwards.
Route list
The route list can only be displayed when the
route guidance function is active; it contains in­
formation on the route, road names and the
length of the route sections. On motorways, po­
tential parking areas and service stations will be

displayed.
You can select them as e.g. a stopover.
Special destinations along the route
Important: The route guidance function must be

active.

You can search for special destinations along
your current route. For more information, please
refer to
opage
211.

»•
Press the |NAV/MAP| button repeatedly until
the map is displayed
^>page
219, Fig. 181.

•
Press the right controL button.
Depending on the function chosen, the following
additional options may be available in the Map

menu:

Stop route guidance: Refer to
^>page
213
Adjust position: You can adjust the vehicle's po­
sition on the map manually and thus change the

route.

Map settings: Refer to
^>page
221.

Route criteria: Refer to
•=>page
217.
Voice guidance: Refer to
^>page
218.
Navigation settings: Refer to
<=>page
217.
Always display alternative routes: Refer to

<=>page
216.
Parking in vicinity of route*: Parking facilities
near the vehicle are displayed.
Store current position*: You can store your
vehi­

cle's current position as a favourite
opage
216
or as a contact in the directory
<^page
216.
Audi connect at this location*: Enables you to
search for e.g. Travel information in the location
entered (events, weather at destination etc.).
Online traffic data*: You can switch the onLine
traffic data on or off
(vf.

Country information: Refer to
^>page
213.
Exclude route*: When route guidance is activa­

ted,
a section of the calculated route that you
have set (max 20 km) will be avoided if possible.
The navigation system will calculate an alterna­
tive route. The route you entered will only be
blocked in the current route guidance; if re­

quired,
you will need to re-enter the route you
wish to avoid. If
you
exclude a route section, this
section will be hatched in red and white on the

map.
•
220

Navigation
Adjust route*: Move your finger
over
the MMI
touch padVrotary pushbutton to adjust the route
on the overview map.
Map settings

Applies
to: vehicles with navigation system

•
Press the
|NAV/MAP|
button repeatedly until
the map is displayed.

•
Select: right control button > Map settings.
Depending on the function seLected, you can use
the following settings:
Map colours
day/night: The map is displayed with a
Light/dark

background colour.
automatic: The colour of the map changes to
match the current light conditions (e.g. from day
to night when driving through tunnels).
Map display
Standard: Refer to
opage
219, Fig. 182.
Google Earth*: Refer to
^>page
222, Fig. 183.

Traffic*1);
Refer to
^>page
225, Fig. 187.
Map orientation
destination: The map indicates the destination
and is set to face north.
2D driving position/2D north map: The map de­
picts the vehicle's current position. The map is
set to face the direction of travel or north.
3D driving position*: The current vehicle
posi­

tion is displayed in a three-dimensional map, and
the map is set to face the direction of
travel.
If
the map scale is more than 100 km, the map is

set to
face north.
overview: The entire route from the vehicle
posi­

tion to the final destination or next stopover is
displayed on the map. The map scale varies ac­
cording to the Length of the route and is adapted
automatically. The map is set to face north.
Route information
The display of route information such as the
street you are currently on, upcoming turn-offs,
traffic information or special destinations on the
current route can be switched on/off.
Automatic zoom

on:
The map scale is adjusted automatically ac­
cording to the category of the road you are on
(motorway, major
road,
other road) to ensure

that
you always have the best possible overview
of the route ahead. When there is an upcoming
turn-off, the map display will also be automati­
cally adjusted so that you have a more detailed
view.
intersection: When route guidance is active and
there are upcoming turn-offs, the map dispLay
will temporarily switch to a more detailed scale
so that the road layout can be identified more
easily.
off: The map scale you have set will remain
unal­

tered.

Map content
The dispLay of map content such as weather in­

formation,
traffic information or favourite desti­
nations can be switched on and off.
The weather* is shown on the map if the scale is
set to 5 km or more
^>page
216, Fig. 179.

CO

rN
IV
rN
t-H
o <
x)
This function is not available in the Mexican market.
221

Navigation
Google Earth map
dispLay

Applies
to: vehicles with navigation system and Audi connect

(infotainment)

You
can have the map display satellite images
using the Google Earth map
display.

•• :•-:•

Fig.
183 Example: Google Earth map display

Ï7
--•
•
III
:•:•
in
in

Fig.
184 Example: Google Earth map display with Google

Street
View
Important: The requirements for Audi connect
(infotainment) must be met
^>page
191.

*•
Press the |NAV/MAP| button repeatedly until
the map is displayed.

*•
Select: right control button > Map settings >
Map display
>
Google Earth.
For this map dispLay the system uses data pack­
ets received online in the form of satellite pic­
tures and combines these pictures with the road
network from the Standard map display. The
MMI has 2 GB of flash memory for temporarily
storing the map/navigation data received online
(corresponds to map/navigation data for about
4000 km of route guidance). You can also use the
loaded satellite pictures for route guidance
with­

out an active data connection as long as these
pictures are stored.

Google
Street View
With Google Street View, you can explore many
locations all over the world virtually from the
perspective of
a
pedestrian. Google Street View is
available as soon as the
symbol®
^>Fig.
183 is
shown in crosshairs mode.
To start Google Street View: Turn the rotary
pushbutton to select
a
scale below 30 m.
The following options are available:
-To explore a destination step-by-step: Press
the rotary pushbutton when the
symbol @

^>Fig.
184 is visible.
- To zoom in/out of the current display (up to

4x):
Turn the rotary pushbutton to the left/

right
(D'=>F/g.JS4.

- To navigate in the street view: Move your
fin­

ger in the desired direction on the MMI touch

pad*
or move the rotary pushbutton in the de­
sired direction.
Additional information
In the Map content menu
^>page
221, you can
activate the function to show additional informa­
tion on the infotainment display. To show the ad­
ditional information move the crosshairs onto an
item on the map and press the rotary pushbut­

ton.

(i) Note

- You can delete the data stored by the Goo­
gle Earth map dispLay by selecting Factory
settings
>
Navigation and online memory

•=>
page 256.
- Google Earth is an Audi connect infotain­
ment service that is updated at regular in­
tervals when it is called up. This can take a
few seconds.
-When the Google Earth 3D map display is
switched on, the map display automatically
switches to the 2D map while you are driv­
ing through a tunnel.
- For safety reasons, the Google Street View
functions cannot be used while the vehicle
is moving.
- Please always note the information in the
chapter
^>page
204, General notes on Audi
connect (infotainment).
- Further information can be found on the In­
ternet at www.audi.com.
222

Navigation
Map
update

CO
< o rN
r^
rN
t-H
O
<
Introduction
Applies to: vehicles with navigation system
There are severaL different ways of updating the

map:

- Map updates via the online map update* func­
tion
^
page 223.
- Map updates via the online map update* func­
tion
•=>
page 223
1).

- Importing a map update to your MMI using an
SD card*
1).
Further information can be found
on the Internet at my.audi.com.
- Map update at your Audi dealer, who may
charge for this service.
Online map update
Applies to: vehicles with navigation system and Audi connect
(infotainment)
With the online map update function you can up­
date the map material
of
your navigation system
directly in the vehicle.
New navigation database
-S>
Eastern Europe
An update is available for your destination
region (Eastern Europe).

"\
Updates can also be downloaded from
' my.audi.com and installed via an SD
card.

Switch to online update

Fig.
185 Example: Display of
a
new online map update

^3>

Eastern Europe
—>
Recommended regions

| Belarus
3,3 MB
O

O
j

T

m
Albania 18,2 MB
D

Packets required OB
Start download
Cancel

Fig.
186 Example: Selection of
a
country package
Important:
The requirements for Audi connect infotainment
services must be met
<=>page
191.

x)
This function is not available in the Mexican market.
You must have a myAudi account and have added
your vehicle to it.
The MMI uses the vehicle's position to establish
which regions you are most often in. The MMI
uses this information to suggest update pack­
ages for these regions if any are available

<*Fig.
185.

•
Select and confirm
(T)
Switch to online update

oFig.
185 when the message informing you of
a new map update appears on the infotainment
display. Or:

•
Select:
IMENU|
button > Settings > left control
button > System maintenance > System up­
date > Online update.
A list of the available update packages is shown
on the infotainment display
^>Fig.
186.
Selecting online map update
- Select an update package from the list
(5f).
If
update packages with a large volume of data
are available for certain countries (e.g. France),
you can choose to update individual regions

(e.g.
only southern France).
- Press the
I
BACK
|
button to confirm your selec­
tion and return the list of available update
packages.
Starting download
- Select and confirm Start download.
- Confirm the safety query by selecting Start
download again.
The update packages will be downloaded, and
the download status will be shown on the info­
tainment display.
Installing online map update
The installation of the downloaded maps only oc­
curs after the vehicLe has been parked. The new
update packages are installed after the ignition is
switched off. When you restart the MMI, a mes­
sage indicating
that
the updates have been in­
stalled successfully will appear on the infotain­
ment dispLay.
- Confirm the successful update with OK.
223

Navigation
The
new
maps
can now be
used
for
navigation.
© CAUTION
If
you
cancel
a
map
update download,
the da­

ta already downloaded
is
permanently
de­

leted.
The
appropriate update package can
be

downloaded again
by
selecting
the
]MENU|

button > Settings > left control button
>
Sys­
tem maintenance > System update.
© Note
- Please always note
the
information
in the

chapter
^>page
191,
Audi connect (infotain­

ment).

- Because
of
the high level
of
data usage
when downloading large country update
packages
or the
entire package,
we
recom­
mend that
in
these cases you download
the

data
on
your computer from your myAudi
account, save them
on an
SD card
and
then
import them
to
your
MMI
system. Further
information
can
be found
on the
Internet
at

my.audi.com.
- Please always note
the
information
in the

chapter
^>page
204,
General notes
on
Audi
connect (infotainment).
myAudi special
destinations
Introduction

Applies
to:
vehicles with navigation system
You
can
import your myAudi special destinations
in
two
ways:
- Importing myAudi special destinations
via the

online update*
^page
224.

- Importing myAudi special destinations
to the

MMI using
an SD
card. Further information
can

be found
on the
Internet
at
my.audi.com.
myAudi special destinations (online
update)

Applies
to:
vehicles with navigation system
and
Audi connect

(infotainment)

You
can download your myAudi special destina­
tions from your myAudi account while
in the
ve­
hicle
and
use them
for
route guidance.
Important:
You must have a myAudi account and have stored
myAudi special destinations.
You must have already sent myAudi special desti­
nations from myAudi
to
your vehicle.
This function
is not
available
in the
Mexican
market.

•
Select:
|NAV/MAP|
button > left control button
> Special destinations
>
myAudi special desti­
nations.

•
If
you
have already imported myAudi special
destinations, select
the
right control button
>

Import myAudi special destinations.

•
Log in
with your myAudi user data/myAudi
PIN

if necessary.
The
update sources available will
be listed
on the
infotainment display.

•
Select and confirm Online update.
Selecting myAudi special destinations
to

import
- SeLect
all the
myAudi special destinations
de­

sired from
the
list
((vft.

- Select and confirm Start download.
Starting download
The size
of
the myAudi special destinations selec­
ted
is
shown
on the
infotainment dispLay.
- Confirm
the
download again
by
selecting Start
download.
The myAudi special destinations will
be
downloa­

ded,
and the
download status will
be
shown
on

the infotainment display.
- To finish importing
the new
myAudi special
destinations, confirm
the
update
by
selecting
OK.
•

224

Navigation

CO

â
rN
r^
rN
•-H
•H
00
Activating myAudi
special
destinations in the
map view
The myAudi special destinations must now be ac­
tivated in the map display so that they can be
used for the navigation system.
Traffic information (TMC/TMCpro*)
Applies to: vehicles with navigation system
- Select: |NAV/MAP| button > right control but­
ton > Map settings
>
Map content. The impor­
ted myAudi special destinations are Listed and
can be identified by the list names you assigned
to them.
- SeLect all myAudi special destinations that you
would like to be shown in the map dispLay.
- Press the
I
BACK|
button.
The selected myAudi special destinations are now
displayed in the map view and can be used for
route guidance.
Please always note the information in the
chapter
opage
204, General notes on Audi
connect (infotainment).

Calling
up
traffic

information

Dynamic traffic avoidance
Applies to: vehicles with navigation system
Using the traffic information received via TMC/
TMCproVonline
-
depending on availability - you
can have the MMI guide you past traffic obstruc­
tions whenever possible. For this, the traffic
avoidance must be switched on
^>page
217.

(T) Note

The "Traffic information" function is not avail­
able for the markets of the Gulf Cooperation
Council (GCC) member states or for the Mexi­
can market.

Map:
Traffic messages

*?
A
better route
is
available Time saving: 30 min

Nùrnberg ^
Halle/Leipzig

NUrnberg •*
Halle/Leipzig
A. in
122 km

Nurnberg -•
Halle/Leipzig

Fig.
187 View of traffic messages with better route

*•
Press the |NAV/MAP| button repeatedly until
the map is displayed.

•
Select: left control button
>
Traffic messages.
An overview
of all
the traffic messages will be
shown on the infotainment dispLay
^>Fig.
187.

The traffic messages are sorted according to road

name.
If
there are several traffic messages for
one
road,
an arrow is displayed next to the road
name in the corresponding line
(f)
(•)•
Press the
rotary pushbutton
to
have all the traffic messag­
es for the road displayed.
When route guidance is started, traffic obstruc­
tions relevant for your route are shown in the top
section of the list in order of the distance from
your current location.
If your MMI has calculated a better route for the
current route guidance, a corresponding message
is
shown
(T)<=>F/g.
187. Further information can
be found on
^>page
226.
Displaying traffic information on the map
The following coloured markings indicate the
traffic flow along your planned route:
-
Green:
no obstructions
- Orange: slow-moving traffic
- Red: traffic
jam

Traffic jams or other obstructions are marked
with a coloured warning symbol on the map
when route guidance is active. Hatched markings
show the stretch of road affected by the traffic
obstruction. Traffic obstructions marked with
grey warning symbols are not on your planned

route.
•

225