2021 Alfa Romeo 4C Instructieboek (in Dutch)

127
DIMENSIONS
Dimensions are expressed in mm and refer to the vehicle equipped with its standard-supplied tyres.
Height is measured with vehicle unladen.
BOOT VOLUMEUnladen capacity (V.D.A. standards) = 110 dm
3
108A0L0119
BACDEFGHL
3990 864 2380 746 1184 1639 1868 1606 2090
Small variations with respect to the reported values are possible depending on the dimensions of the rims.

TECHNICAL DATA
128
Versions1750 Turbo Petrol
Unladen weight (with all fluids, fuel tankfilled to 90% and without optional equipment): 993
Payload including the driver: (*) 255
Maximum permitted loads (**)
– front axle: 510
– rear axle:



755
– total: 1230
Towable loads (kg)
– braked trailer: 0
– unbraked trailer: 0
Maximum load on roof: 0
Maximum load on ball joint (braked trailer): 0
(*) If special equipment is fitted, the unladen vehicle weight increases, thus reducing the specified payload within the maximum permitted loads.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment within the maximum permitted loads.
WEIGHTS

129
Prescribed fuels /
Fluids and original lubricants1750 Turbo Petrol
kglitres
REFUELLING
Fuel tank 40 –
Unleaded petrol no
including a reserve of 4 - 5 – lower than 95 RON (EN228 specifications)
Engine cooling system 10,6 9,4 50% mixture of distilled water and
PARAFLUUP(*)
Engine sump 5.4 4.6
SELENIA SPORT POWER
Engine sump and filter 5.8 5.0
Gearbox/differential 1.88 1.6 TUTELA TRANSMISSION GEARTECH
Hydraulic gearbox actuator system 1.45 1.2 TUTELA CS SPEED
Hydraulic brake circuit with
0.52 0.56 TUTELA TOP 4 or TUTELA TOP 4/S
ABS anti-locking device
Windscreen washer liquid vessel 1.9 1.7 Water and liquid mixture
PETRONAS DURANCE SC 35
(*) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLU
UPand 40% of
demineralised water.

TECHNICAL DATA
130
FLUIDS AND LUBRICANTS
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the
Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications.
Lubricant quality is crucial for engine operation and duration.
PRODUCT SPECIFICATIONS
28)
Petrol engine
lubricant
Replacement interval /
applicationsUseFeatures Genuine fluids and
lubricants
SAE 5W-40 ACEA C3 / API SN SELENIA SPORT POWER
Contractual Technical
Reference N. F052.H12According to Scheduled
Servicing Plan
In case of emergency, if the above specified lubricants are not available, products with the minimum indicated ACEA performance can be used for
topping up; in this case optimal performance of the engine is not guaranteed.SAE 75W-85 grade synthetic-base
lubricant. SAE 75W 85 API GL4TUTELA TRANSMISSION
GEARTECH
Contractual Technical
Reference N.F704.C08TCT automatic transmission
–TUTELA CS SPEED
Contractual Technical
Reference N. F005.F98Lubricant for electro-
hydraulic actuator
Molybdenum disulphide grease, for use
at high temperatures.
NL.G.I. 1-2 consistency TUTELA ALL STAR
Contractual Technical
Reference N. F702.G07Constant velocity joints
wheel side
Grease for constant velocity joints with
low friction coefficient.
NL.G.I. 0-1 consistencyTUTELA STAR 700
Contractual Technical
Reference N. F701.C07 Oils and greases
for driveline
Differential side constant
velocity joints
Specifications
9.55535-GH2
9.55550-MZ3
or
MS.90030-M2
9.55550-SA1
or
MS.90030-H1
9.55580-GRAS II
9.55580-GRAS II

131
(*) IMPORTANT Do not top up or mix with other fluids which have different specifications from those described.
(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLUUPand 40% of demineralised
water.Synthetic fluid for brake and clutch
systems. That passes
FMVSS n. 116 DOT 4 specifications,
ISO 4925, SAE J1704 TUTELA TOP 4
Contractual Technical
Reference N° F001.A93
or
TUTELA TOP 4/S
Contractual Technical
Reference N° F005.F15Hydraulic brakes and
hydraulic clutch controls
Mixture of alcohol, water and
surfactants
CUNA NC 956-11 ^

SC 35
Contractual Technical
Reference N. F201.D02To be used diluted or
undiluted in
windscreen washer/wiper
systems Windscreen
washers liquidRed protective with antifreeze action,
based on inhibited monoethyl glycol
with organic formula. Exceeds CUNA NC
956-16, ASTM D 3306 specifications. PARAFLU
UP(*)
Contractual Technical
Reference N. F101.M01Proportions of use:
50% demineralised water
50% PARAFLU
UP(**) Protective agent
for radiators Brake liquid
Adhesive for glassBasic adhesive MS Polymer
FIAT qualification 9.55738/CSIMSON ISR 70-08 AP Gluing windows to body
Replacement interval /
applicationsUseFeatures Genuine fluids and
lubricants
28)The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.
WARNING
Specifications
9.55597
or
MS.90039
9.55523
or
MS.90032
9.55522
or
MS.90043
–

TECHNICAL DATA
132
PERFORMANCE
Top speed (km/h)Acceleration 0-100 km/h (sec.)
1750 Turbo Petrol 258 4.5
Versions
FUEL CONSUMPTION ACCORDING TO THE CURRENT EUROPEAN DIRECTIVE (litres/100 km)
FUEL CONSUMPTION
The fuel consumption figures given in the table below are determined on the basis of the type-approval tests laid down by specific
European Directives.
The following procedures are used to measure the fuel consumption:
❒ urban cycle: cold starting followed by driving that simulates urban use of the car;
❒ extra-urban cycle: driving that simulates extra-urban use of the car, with frequent acceleration in all gears; the speed varies from
0 to 120 km/h;
❒ combined consumption: this is calculated with a weighting of about 37% urban cycle consumption and about 63% extra-urban
consumption.
IMPORTANT The type of route, traffic situations, weather conditions, driving style, general conditions of the car, trim
level/equipment/accessories, load, climate control system, roof rack, other situations that affect air drag may lead to different fuel
consumption levels than those measured.
VersionsUrban Extra-urbanCombined
1750 Turbo Petrol 9.8 5.0 6.8

133
EMISSIONS OF CO2
The CO2emission levels shown in the following table refer to combined fuel consumption.
CO2emissions as per the European directive in force (g/km)
1750 Turbo Petrol 157
Versions

TECHNICAL DATA
134
PRESCRIPTIONS FOR HANDLING THE VEHICLE AT THE END OF ITS LIFE (where provided)
FCA has been committed for many years to safeguarding the environment through the constant improvement of its production
processes and manufacturing products that are increasingly “eco-compatible”. To grant customers the best possible service in terms
of respecting environmental laws and in response to European Directive 2000/53/EC governing vehicles at the end of their life, FCA
is offering its customers the chance to hand over their vehicle at the end of its life without incurring any additional costs.
The European Directive sets out that when the vehicle is handed over, the last keeper or owner should not incur any expenses as a
result of it having a zero or negative market value.
To hand your vehicle over at the end of its life without extra cost, contact one of our dealerships if you are purchasing another vehicle
or an FCA-authorised collection and scrapping centre.
These centres have been carefully chosen to offer high quality service for the collection, treatment and recycling of vehicles at their
end of life, respecting the surrounding environment.
You can find further information on these collection and scrapping centres either from an FCA dealership or by calling the number in
the Warranty Booklet or by consulting the websites of the various FCA brands.