2020 VOLKSWAGEN TRANSPORTER lock

[x] Cancel search: lock

Page 234 of 486

VOLKSWAGEN TRANSPORTER 2020  Owners Manual A WARNING (Continued) 
• In addition, a leak/function check must be carried out on the gas system by a qualified workshop every time the system is repaired or the gas system connections are opened.

Page 235 of 486

VOLKSWAGEN TRANSPORTER 2020  Owners Manual Connecting the gas bottle 
Fig. 199 Connected gas bottle with bottle safety valve and pressure regulator 
r-ln First read and observe the introductory L-J.:.IJ information and safety warnings & on pa

Page 236 of 486

VOLKSWAGEN TRANSPORTER 2020  Owners Manual Remove the central and lower shelves from the stowage compartment. 
Unscrew the cover on the gas bottle holder com-pletely and remove it. 
Make sure that the bottle safety valve 199 G) is completely c

Page 237 of 486

VOLKSWAGEN TRANSPORTER 2020  Owners Manual • Keep the knob pressed in for approx. 15 sec-onds to temporarily bridge the igniter safety device. If you let go of the knob too quickly, the gas flame goes out. If this occurs, re-light the burner

Page 238 of 486

VOLKSWAGEN TRANSPORTER 2020  Owners Manual Fresh water system 
Fig. 202 Fresh water filler neck CD. 
l"""(n First read and observe the introductory L-J.:.I.I Information and safety warnings & on page 237. 
The fresh water level is displayed

Page 239 of 486

VOLKSWAGEN TRANSPORTER 2020  Owners Manual Sterilising agent 
f"""(n First read and observe the Introductory L-J,:,U information and safety warnings & on page 237. 
Volkswagen Commercial Vehicles recommends adding a sterilising agent to the f

Page 241 of 486

VOLKSWAGEN TRANSPORTER 2020  Owners Manual Cleaning the drain 
r-fn First read and observe the introductory l.-.lo=-U information and safety warnings & on page 237. 
• Make sure that there is no food debris or water in the sink. 
• You wi

Page 243 of 486

VOLKSWAGEN TRANSPORTER 2020  Owners Manual • Pump for fresh water 
• Auxiliary heater 
230-volt grounded safety socket 
The 230-volt grounded safety socket is supplied with 230 V alternating current via electrical feed from the external so