2020 VOLKSWAGEN ID.4 window

2. To enlarge the display of images and
maps, slowly mo ve your fingers apart.
OR: to reduce the display of images and
maps, slowly move your fingers togeth-
er. Personalising the Infotain-
ment system
Please refer to and on page 218.
Depending on equipment, you can per-
sonalise the Inf

otainment system to per-
mit faster access to favourite or fre-
quently used functions.
Configuring tiles
You can find tiles for accessing further menus
and functions on the Infotainment system
displays. Configure the tiles by removing or
adding views.
Tiles with additional functions can be found
in the Infotainment system as from the sec-
ond view. You can configure these tiles.
1. Touch the tile and keep your finger on the screen until an additional window
opens.
2. Touch to open the configuration func-
tion.

1. Touch to show the frequency band.
2.
Touch the marking, move on the fre-
quency band and release at the desired
frequency.
OR: touch a point on the frequency
band. The marking automatically jumps
to the corresponding frequency.
The station at the set frequency is set.
Selecting from station list (FM/DAB) The station list shows the stations that can
currently be receiv
ed. The station list is upda-
ted automatically.
1. Open the station list.
2. Touch the desired station.
The selected station is set. The best reception
mode is selected automatically according to
availability of the station. Searching for and filtering stations (Inter-
net Radio) In Internet Radio mode, you can search for
stations by means of a full te

xt search or fil-
ter stations according to categories.
1. To start the full text search, touch and enter the name of the desired sta-
tion. The list of f

ound stations is auto-
matically updated during input.
OR: select the desired category to filter
stations according to a category.
2. Touch the desired station.
SCAN Searching in SCAN mode (FM/DAB) In SCAN mode, the stations of the frequency
band are automatically set successiv

ely and
played for around 5 seconds in each case.
SCAN mode is possible only in the additional
window in which the current playback con-
tent is displayed.
1. Touch the
SCAN function button to start
the SCAN function.
The SCAN function starts and the cur-
rently set station is shown on the dis-
play. The
SCAN function button is high-
lighted. 2. To select a station, touch
SCAN. The SCANfunction button is no longer highlighted.
The SCAN function stops and the station is
set. Saving stations as favourites to station
buttons You can save up to 36 stations from different
frequency bands and reception modes as fa-
v

ourites on station buttons.
1. Set the desired station.
2. Touch .
OR: touch and hold a station in the sta-
tion list.
3.

Touch .
OR: touch an already assigned station
button and hold f

or around 3 seconds.
The station is stored to the selected station
button.
If a station was already stored on the station
button, this station will be removed from the
station button and replaced by the new sta-
tion. Online functions in radio
mode
Please refer to and on page 218.
With some equipment le

vels, the Infotain-
ment system has online functions in radio
mode.
Internet Radio is an example of an online
function in radio mode.
Requirements for using online functions in
radio mode:
q The vehicle is equipped with We Con-
nect Start.
q We Connect Start is activated and the
vehicle is assigned to your user account.
q You have a data plan on the SIM-card of
your mobile device and have connected
Radio mode 233
11A012720AB

x
Accelerate carefully and gently.
x A
void sudden braking and driving ma-
noeuvres.
x Brake earlier than in normal driving. NOTICE
Rubbing objects on the rear windows can
cause damage, e.g. to the heating wires of
the rear window heating. Luggage compartment
co

ver Fig. 125
In the luggage compartment: remo
v-
ing and installing the luggage compartment cov-
er.
When the boot lid is opened and closed, the
luggage compartment cover is also raised
and lowered if the retaining straps are at-
tached.
The luggage compartment cover is not suita-
ble as a shelf for objects, not even for light
pieces of clothing

Fig. 158
Changing the wiper blade f or the rear
window.
The factory-fitted windscreen wiper blades
are coated with graphite. The graphite coat-
ing ensures that the wiper blade moves qui-
etly over the window. If the graphite coating
is damaged, the wiper will become louder.
Check the condition of the wiper blades on
a regular basis. Rubbing wiper blades should
be changed if damaged or cleaned if dirty

x
Do not use fuel, nail v arnish remover, paint
thinner or similar products to clean the
windows. Wax deposits on the windscreen and
rear window could cause the wiper
blades to rub. Remo

ve wax residue using
a special cleaning product or cleaning cloths. Exterior lighting
Introduction to the topic
Bef

ore changing a bulb, check whether a bulb
or LED light unit has failed. You can normally
change bulbs yourself. If the exterior lighting
is realised using LED technology, depending
on model and vehicle equipment, it is not
possible for you to change the LED light units
or individual LEDs yourself. If individual LEDs
fail, this may be an indication that more LEDs
are on the point of failure. In this case, have
the LED light units checked and renewed if
necessary at a qualified workshop.
It may be illegal to drive with faulty exterior
lights.
Additional bulb specifications
Some bulbs might have factory specifications
that differ from standard bulbs. The designa-
tion is inscribed on the bulb, either on the
glass part or on the base. WARNING
Changing bulbs incorrectly can cause acci-
dents and serious injuries.
x When working in the bonnet space, al-
ways read and observ

e the safety warn-
ings

x
If the power supply of the towed v ehicle
fails, stop towing immediately and seek
expert assistance. NOTICE
Towing with a tow-rope or tow-bar can dam-
age the v
ehicle.
x Tow the vehicle carefully with a tow-rope
or tow-bar.
x If possible, have the broken-down vehicle
transported by a breakdown truck. NOTICE
When pushing the vehicle by hand, the tail
light clusters, side spoilers on the rear win-
dow and large panels can be damaged and
the rear spoiler may become detached.
x When pushing the v

ehicle by hand, do not
press on the tail light clusters, side spoilers
on the rear window, large panels and the
rear spoiler. NOTICE
The vehicle can be damaged, e.g. the vehicle
paintwork, when remo
ving and fitting the
cover and towing eye.
x Remove and install the cover and the tow-
ing eye carefully so as to avoid damage to
the vehicle. NOTICE
Use of a towing eye that is not suitable for
the v
ehicle can damage the vehicle.
x Always use the towing eye supplied in the
vehicle toolkit of your vehicle or a towing
eye that is suitable for the vehicle for tow-
ing. Notes on towing
Please refer to and at the start of
the chapter on page 304.
It is still possible to activ

ate the turn signals
in a vehicle that is being towed, even if the
hazard warning lights are switched on. To do
this, operate the turn signal and main beam
lever in the required direction while the igni-
tion is switched on. The hazard warning lights
will not flash while the turn signal is being
used. The hazard warning lights will start
flashing again automatically as soon as the
turn signal and main beam lever is moved
back to the neutral position.
In which situations may the vehicle not be
towed?
In the following situations, the vehicle may
not be towed for a long distance on its own
tyres:

fluid. These may leave an oily film on the
window, considerably restricting the field
of vision.
NOTICE
x Ne ver mix suitable cleaning agents with
other cleaning agents. This can cause the
ingredients to separate and block the
washer jets. Coolant
Introduction to the topic
Do not work on the cooling system unless
you are familiar with the task, aware of the
general saf

ety procedures and have the cor-
rect equipment, service fluids and suitable
tools. Failing to carry out work correctly can
cause serious injuries

x
Do not use cleaning agents that contain
solv ents. Solvents can cause irreparable
damage to the airbag modules.
x Protect your hands and arms against
parts with sharp edges, e.g. when clean-
ing the insides of the wheel housings. WARNING
If the windscreen, door windows or rear
window are dirty, iced up or aff
ected by
condensation, visibility will be reduced and
the risk of accidents and severe injuries will
increase. This could impair the safety
equipment of the vehicle.
x Drive only when you have a clear view
through all windows.
x Do not treat the windscreen with water-
repellent window coating agents. In un-
favourable conditions, they can cause in-
creased dazzle. WARNING
Care products may be toxic and hazardous.
Unsuitable care products and incorrect ap-
plication of care products can cause acci-
dents, se

vere injuries, burns or poisoning.
x Store care products only in the closed
original container.
x Observe the manufacturer