2020 VOLKSWAGEN ID.4 display

Vehicle settings menu
Please refer to at the start of the chap-
ter on page 30. You can switch individual functions and
systems on and off and adjust the set-
tings in the v
ehicle settings of the Info-
tainment system.
Opening the
Vehicle settings menu
1. Switch on the ignition.
2. Switch on Infotainment system if neces- sary.
3. Touch the Vehicle function button.
4.

Touch the corresponding function but-
tons from
Interior or Exterior to open addi-
tional submenus in the Vehicle menu or to
adjust settings in the menu options.
5. Open the desired menu and make the desired setting.
The activated functions are highlighted
in colour. Exit menu
Please refer to at the start of the chap-
ter on page 30. In the Exit menu, you can adjust settings
f

or some functions before you leave the
vehicle. When you switch off the igni-
tion, the Exit menu will be displayed in
the Infotainment system.
The displayed options depend on the vehicle
equipment and may be available only under
certain conditions. The adjustable functions
may include the following, for example:

Brightness
1.
Touch the Brightness function button in
the control centre.
2.

Adjust the brightness by means of the
touch slider.
OR:
1. Touch the Vehicle function button on the
Inf

otainment system.
2. Select display content for the
Interior.
Then touch the ID. Light function button.
3.
Adjust the brightness by means of the
touch slider.
4. Touch the
HOME button to return to
the pre
vious menu.
Settings in the Infotainment system
1. Touch the Vehicle function button.
2.

Select display content for the
Interior.
Then touch the ID. Light function button.
3.
Set the functions for ID. Light as desired.
The activated functions are highlighted
in colour.
Certain ID. Light functions can be optionally
activated or deactivated in the vehicle set-
tings in the Infotainment system.

Belt status display for the rear seats (de-
pending on country and equipment)
Fig. 20
On the instrument cluster display: seat
belt status f or the rear seats.
After the ignition has been switched on, the
belt status display

Speed range
The basic function of the proactiv
e occupant
protection system is available when driving
forwards at speeds from approx. 30 km/h
(19 mph).
Displays
In the event of intervention by the
proactive occupant protection sys-
tem, the red warning lamp lights up
on the instrument cluster display. WARNING
The intelligent proactive occupant protec-
tion system cannot o
vercome the laws of
physics, and functions only within the lim-
its of the system. Never let the extra con-
venience afforded by the proactive occu-
pant protection system tempt you into tak-
ing any risks when driving. The system can-
not prevent a collision. The system is not
a substitute for the full concentration of
the driver.
x Adapt your speed and distance from the
vehicles ahead to suit visibility, weather,
road and traffic conditions.
x The system cannot detect objects in all
situations.
x The proactive occupant protection sys-
tem does not react to animals or poorly
visible objects.
x Reflective objects such as safety barri-
ers, tunnel entrances, heavy rain and ice
can impair the performance of the pro-
active occupant protection system and
thus prevent it from detecting a collision
risk.
x The system may be falsely triggered. Functions of the proactive oc-
cupant protection system
Please refer to at the start of the chap-
ter on page 45.
Basic functions
The f

ollowing functions may be triggered in-
dividually or together in critical driving situa-
tions, e.g. in the event of emergency braking,
understeer and oversteer or minor collisions:

The automatic anti-dazzle function will be
deactiv
ated in some situations, e.g. when re-
verse gear is engaged. WARNING
The illuminated display from a portable
na
vigation device can lead to functional im-
pairment of the interior automatic anti-
dazzle mirror and cause accidents or seri-
ous injuries.
x You may not be able to precisely deter-
mine the distance from vehicles travel-
ling behind you or from other objects if
the automatic anti-dazzle function is im-
paired. Exterior mirrors
Fig. 95
In the driv
er door: rotary knob for the
exterior mirrors.
The exterior mirror functions for left-hand
drive vehicles are described below. Position corresponds to the exterior mirror on the
driv

er side and position to the exterior mir-
ror on the front passenger side. These in-
structions are mirrored f
or right-hand drive
vehicles.

WARNING
Closing the sun blind without the roll-back
function can cause serious injuries.
x Always close the sun blind carefully.
x Ensure that nobody obstructs the path
of the sun blind, especially if the roll-
back function is not activ
e when it is
closed.
x The roll-back function does not prevent
fingers or other body parts from being
pressed against the roof frame and sus-
taining injury. Heating and air condi-
tioning system
Heating, v

entilation,
cooling Introduction to the topic
The Climatronic is an automatic air condi-
tioning system that heats, cools and dehu-
midifies the air. Automatic mode enables the
Climatronic to control the air temperature, air
distribution and air v

olume automatically.
The air conditioning system will work most
effectively if the vehicle interior is kept
closed. Opening the windows and glass roof
to provide fresh air may accelerate cooling
down the vehicle if high temperatures have
built up in the vehicle interior.
Display of active functions
Illuminated symbols on the sensor buttons
indicate that the function is switched on.
Colour-coded function buttons display an ac-
tivated function in the climate settings on
the Infotainment system.
Operating the air conditioning system with
voice commands
Depending on the vehicle equipment, some
functions of the air conditioning system can
be operated with the voice control function

WARNING
Poor visibility through the door windows,
windscreen and rear window increases the
risk of collisions and accidents which can
cause serious injuries.
x Keep all door windows, the windscreen
and the rear window free from ice, snow
and condensation to maintain perf
ect
visibility.
x Adjust the heating, air conditioning and
rear window heating to prevent conden-
sation from forming on the windows.
x Only set off once all windows are clear.
x Use air recirculation mode for a short
period only. Condensation could other-
wise form very quickly on the windows,
greatly reducing visibility.
x Switch off the air recirculation mode
when it is no longer required. NOTICE
Food, medicine and other items that are sen-
sitiv
e to heat or cold could be either dam-
aged or rendered useless by the air flowing
out of the vents.
x Never leave food, medicines or other tem-
perature-sensitive objects in front of the
vents. NOTICE
If the air conditioning system is not working,
switch the air conditioning system off imme-
diately and ha

ve it checked by a qualified
workshop. This can help to prevent secondary
damage. Overview of functions
Please refer to and at the start of
the chapter on page 120.
Some functions of the air conditioning sys-
tem and menus in the Inf

otainment system as well as an air conditioning block for the
rear seats depend on the equipment le

vel.
In the Infotainment system Open the air conditioning settings in
the Infotainment system.
In the Infotainment system: upper screen
edge
Switch the air conditioning system on
and off.
In the Infotainment system: lower screen
edge Select temperature. Depending on the
equipment level, you can set the tem-
perature directly in the Infotainment
system or use the touch sliders be-
neath the Infotainment system. The
selected temperatures are displayed
at the bottom of the screen in the In-
fotainment system.
The temperatures set for the rear row
of seats are shown on the displays for
the air conditioning block for the rear
seats. Adopt temperature settings of driver
side f
or all seats. Switch the seat heating on and off

You can continue to drive.
No v
alid vehicle key recognised
A corresponding display is shown in the
ID. Cockpit.
If the button cell in the vehicle key is weak or
discharged, it is possible that the vehicle key
will not be recognised.
In this case it is necessary to perform an
emergency start: