2020 VOLKSWAGEN ID.4 instrument cluster

The ID. Cockpit is a digital instrument
cluster with a high-resolution LC colour
display. By selecting diff
erent informa-
tion profiles, displays from the driver as-
sist systems and other displays can be
shown in addition to the digital speed-
ometer. The term “digital instrument
cluster” is used below for the ID. Cock-
pit.
Views in the display area
The digital instrument cluster can display the
following views

The displayed value is calculated and updated
depending on the driving style and ambient
conditions. The range can theref
ore also vary
even for a fully charged high-voltage battery.
Reserve range Fig. 12
In the digital instrument cluster: range
and reserv
e capacity display.1
Charge level and range. 2
Reserve capacity warning level 1 and
range. 3
Reserve capacity warning level 2 and
range. When the red reserve range of the high-volt-
age battery is reached, the symbol
is dis-
played together with a colour percentage v
al-
ue

and symbols can vary depending on the ver-
sion of the instrument cluster.
Priority 1 warning
The red central warning lamp flashes or lights
up, in some cases together with acoustic
warnings or additional symbols. Do not
driv
e on! Danger. Check the fault. Seek expert
assistance if necessary. Priority 2 warning
The yellow central warning lamp flashes or
lights up, in some cases together with acous-
tic warnings or additional symbols. Malfunc-
tions and insufficient service fluids can dam-
age the v

ehicle and cause it to break down.
Check the fault as soon as possible. Seek ex-
pert assistance if necessary. Reference to information in the own-
er

tional sign in the head-up display and in the
instrument cluster.
Displays
In addition to speed limits and o
vertaking re-
strictions, Dynamic Road Sign Display also
detects the road sign which indicates that all
restrictions have been lifted on motorways
and main roads in Germany. In all other coun-
tries in which the system is operated, the
current speed limit is displayed instead.
The road signs detected by the Dynamic Road
Sign Display system are displayed on the in-
strument cluster. Road signs may also be dis-
played in the Infotainment system, depend-
ing on the system installed in the vehicle.
With some equipment levels, a display is also
shown on the Head-up Display.
The system is in the initial-
isation phase. OR: the camera has not
detected any regulatory or warning
signs.
System fault. Go to
a qualified workshop.
Fault in the Dy-
namic Road Sign Display system
speed warning. Go to a qualified
workshop.
The
windscreen is dirty in the area of the
camera or the camera view is im-
paired due to the weather conditions.
Clean the windscreen.
No data
transmission from the Infotainment
system. Check whether valid map da-
ta is loaded in the Infotainment sys-
tem. OR: the vehicle is located in an
area that is not covered by the map
stored in the Infotainment system.
Dynamic Road Sign Display is
not supported in the country in which
you are currently travelling.
No road signs available.
Error: Dynamic Road Sign Display
Speed warning currently not available.
Dynamic Road Sign Display: Clean the windscreen!
Dynamic Road Sign Display is currently restricted.
No data available.
Display of road signs Fig. 16
In the instrument cluster display: e
xam-
ple of recognised speed limits with generic addi-
tional sign.
After validation and evaluation of the infor-
mation from the camera, the Infotainment
system and the current vehicle data, the Dy-
namic Road Sign Display shows up to two
valid road signs and one generic additional
sign

Eco assistance
Please refer to at the start of the chap-
ter on page 18. Fig. 17
Eco Assistance display (illustration).
The Eco Assistance function supports you
during def
ensive and energy-saving driving
with notifications in the digital instrument
cluster that appear according to the situation

Service interval display
Please refer to at the start of the chap-
ter on page 18.
Service e
vents are displayed on the instru-
ment cluster and in the Infotainment system.
Service notification
When an inspection is due, a service an-
nouncement will appear on the instrument
cluster display when the ignition is switched
on.
The number of kilometres or amount of time
shown correspond to the maximum number
of kilometres or maximum time that can still
be driven before the next inspection.
Service event
For a scheduled inspection, an acoustic signal
will be given when the ignition is switched on
and the spanner symbol will be displayed
f

or several seconds on the instrument cluster
display. One of the following displays will al-
so appear:

Belt status display for the rear seats (de-
pending on country and equipment)
Fig. 20
On the instrument cluster display: seat
belt status f or the rear seats.
After the ignition has been switched on, the
belt status display

Speed range
The basic function of the proactiv
e occupant
protection system is available when driving
forwards at speeds from approx. 30 km/h
(19 mph).
Displays
In the event of intervention by the
proactive occupant protection sys-
tem, the red warning lamp lights up
on the instrument cluster display. WARNING
The intelligent proactive occupant protec-
tion system cannot o
vercome the laws of
physics, and functions only within the lim-
its of the system. Never let the extra con-
venience afforded by the proactive occu-
pant protection system tempt you into tak-
ing any risks when driving. The system can-
not prevent a collision. The system is not
a substitute for the full concentration of
the driver.
x Adapt your speed and distance from the
vehicles ahead to suit visibility, weather,
road and traffic conditions.
x The system cannot detect objects in all
situations.
x The proactive occupant protection sys-
tem does not react to animals or poorly
visible objects.
x Reflective objects such as safety barri-
ers, tunnel entrances, heavy rain and ice
can impair the performance of the pro-
active occupant protection system and
thus prevent it from detecting a collision
risk.
x The system may be falsely triggered. Functions of the proactive oc-
cupant protection system
Please refer to at the start of the chap-
ter on page 45.
Basic functions
The f

ollowing functions may be triggered in-
dividually or together in critical driving situa-
tions, e.g. in the event of emergency braking,
understeer and oversteer or minor collisions: