Page 248 of 417
A forecast arrival time will be displayed.
You can activ
ate or deactivate the function at
any time and also delete the stored data for
the function.
Activating and deactivating “Learn usage
pattern” 1. Touch
Basic functions to open the set-
tings for this function.
2. To activate the function, activate
Learn us-
age pattern.
3. To deactivate the function, deactivate
Learn usage pattern.
Deleting stored data 1. Touch
Basic functions Delete usage patternto delete the stored data for the func-
tion.
2. Touch confirmation to delete.
360
Page 251 of 417
x
Carry out pairing only when the v ehicle
is stationary. When some mobile devices are paired,
a PIN is shown on the display of the
mobile de
vice. To finish the pairing proce-
dure, enter this PIN on the Infotainment sys-
tem.
Bluetooth pairing via NFC
NFC is not available in all countries and vehi-
cle models. Depending on the vehicle equip-
ment, NFC is not available in every vehicle
with a wireless charging function.
Prerequisites for one-off pairing:
q NFC technology and a stowage compart-
ment with wireless charging function are
installed in the vehicle.
q NFC is activated on the mobile device. 1. Touch
Select mobile telephone.
2. Unlock the mobile device.
3. Place the mobile device correctly on the stowage area for the wireless charging
function.
4. Continue and confirm Bluetooth pairing in accordance with the displays on the
mobile device and Infotainment system.
The mobile device is paired with the Infotain-
ment system.
The wireless charging function is deac-
tivated while the Infotainment system
is in the
Known mobile phones menu. The wireless
charging function will be reactivated when
you leave the menu.
Managing connections
Prerequisites:
q The mobile device is paired and connec-
ted. 1. Touch
HOME
Mobile devices.
2. Touch the technology desired for the connection. Active and passive connection
At least one mobile de
vice must be connec-
ted to the Infotainment system in order to
use the functions of the mobile phone inter-
face. If several mobile devices are connected
to the Infotainment system, you can switch
between active and passive connections. Es-
tablish an active connection to the Infotain-
ment system in order to operate the mobile
phone interface with the desired mobile de-
vice.
Difference between the connection types
Mobile device is paired and connec-
ted. The functions of the mobile
phone interface are performed with
the data of this mobile device.
Mobile device is paired and connec-
ted. Only incoming calls can be ac-
cepted via the mobile phone inter-
face. No other functions are available.
Paired mobile devices are stored in the Info-
tainment system even if they are not current-
ly connected.
Changing the connection type (passive to ac-
tive) The connection type can be changed only if
se
veral mobile devices are connected to the
Infotainment system at the same time.
1. Touch . The mobile device with active
connection is marked.
2.
Touch the name of the desired mobile
device. Other mobile devices then auto-
matically have a passive connection.
User profiles
An individual user profile is automatically cre-
ated for every paired mobile device. Data
from the mobile device are stored in the user
profile, e.g. contact details. A maximum of
ten user profiles can be stored in the Info-
tainment system simultaneously.
Deleting a user profile 1. Touch .
The user profiles are located in the area
Select mobile telephone or Mobile devices.
Active
Passive
Mobile phone interface 24911A012720AB
Page 253 of 417
Qi-capable mobile devices with larger dimen-
sions cannot be charged wirelessly.
Bef
ore charging, remove any foreign objects
with metallic components such as coins from
the stowage compartment and observe the
operating instructions for the mobile device.
To charge a Qi-enabled mobile device, re-
move the protective cover and place the en-
tire surface of the device flat in the centre of
the stowage area with the display facing up-
wards. The charging process starts automati-
cally.
The factory-fitted Infotainment system will
provide information about the start of the
charging operation and, where applicable,
about any foreign objects with metallic com-
ponents that are detected in the stowage
compartment. Remove foreign objects im-
mediately.
If the mobile device has not been positioned
correctly in the stowage area or is too large,
it cannot be detected or cannot be detected
correctly. In certain circumstances, the Info-
tainment system will report that there is
a foreign object in the stowage compart-
ment. The fault can be rectified if a suitable
mobile device is used and its position is cor-
rected.
Stowage compartment cover
The storage compartment for the wireless
charging function has a cover for the mobile
device
Page 255 of 417
Favourites and speed dial buttons
A fa
vourite from the telephone book can be
assigned to a speed dial button. If an image is
stored in the entry, this will be displayed on
the speed dial button.
Speed dial buttons must be assigned manual-
ly and are assigned to a user profile
Page 284 of 417
Fig. 145
Behind the charging socket flap at the
rear right: charging socket. 1
Charging process display
Page 288 of 417
There is a fault in range calculation. Go to
a qualified workshop.
Charging not possible or aborted
The charging process display on the charging
socket lights up red.
Bef
ore you visit a qualified workshop, you
can perform the following troubleshooting
measures:
Page 293 of 417
Page 326 of 417
12-volt vehicle battery
The indicator lamp lights up yellow. The fol-
lowing messages can be displayed:
