YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)
3895-2. Scheduled Maintenance
5
Maintenance and Care
Oil Change
Setting Inter-
val
The oil replacement period can be
selected from the flexible setting or fixed
setting, or it can be set to non-display.
The flexible setting is available only in the
United States and Puerto Rico. Once
engine oil flexible maintenance is
selected, the vehicle calculates the
remaining oil life based on the engine
operating conditions. The vehicle lets you
know when an oil change is due by illumi-
nating the wrench indicator light in the
combination meter. Toyota Genuine
Motor Oil or equivalent are required to
achieve optimum performance.
Distance (mile
or km)
(Displays only
in fixed set-
ting)
Displays the distance until the oil replace-
ment is due.
Select this item to set the oil replacement
distance.
“Oil Change Due!” is displayed in red and
the wrench indicator light in the combina-
tion meter will be illuminated when the
remaining distance is less than 250 miles
or 500 km.
Oil life (%)
(Displays only
in flexible set-
ting)
Displays the engine oil life until the oil
replacement is due.
“Oil Change Due!” is displayed in red and
the wrench indicator light in the combina-
tion meter will be illuminated when the
remaining oil life distance is less than
250 miles (500 km), or remaining days
are less than 15 (whichever comes first).
Reset
In flexible setting:
Resets the remaining oil life to 100%.
In fixed setting:
Resets the remaining distance to the ini-
tial value.
Once the Flexible Oil Maintenance Set-
ting is selected, the system must be reset
whenever replacing the engine oil.
Ta bItemExplanation
3965-3. Owner Maintenance
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)
After replacing the engine oil, have a repair shop such as your Toyota
dealer perform the initialization (engine oil data resetting) o f the
recorded value. If the value recorded by the computer is not in itialized,
the wrench indicator light may not turn off or it may turn on e arlier than
normal.
● This procedure is intended for vehicles with the engine oil fle xible mainte-
nance setting selected.
● The initialization (engine oil data resetting) of the recorded value can be per-
formed using the following procedure:
Switch the ignition OFF.
Vehicle Engine Control U nit Reset Procedure
Switch the ignition ON with the selec-
tor pressed and continue pressing the
selector for about 5 seconds until the
master warning light flashes.
After the master warning light
flashes for several seconds, the ini-
tialization is completed.
1
2
3
Selector
