2020 TOYOTA YARIS HATCHBACK jacking

YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)
4656-2. Flat Tire
6
If Trouble Arises
If your vehicle is equipped with
a wheel cover, pry off the wheel
cover with the beveled end of
the jack lever.
Force the end of the jack lever
firmly between wheel and cover, or
removal will be difficult.
Loosen the lug nuts by turning
them counterclockwise one turn
each, but do not remove any
lug nuts until the tire has been
raised off the ground.
Place the jack on the ground.
Turn the jack screw in the direc-
tion shown in the figure and
adjust the jack head so that it is
close to the jack-up position.
Place the jack under the jack-
up position closest to the tire
being changed with the jack
head squarely under the jack-
up point.
Removing a Flat Tire
1
2
3
Jack headQ
Jacking position
R

4666-2. Flat Tire
YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)
Continue raising the jack head
gradually by rotating the screw
with your hand until the jack
head is inserted into the jack-up
position.
When raising the jack head into the
jacking position and aligning the
groove in the jack head with the rail
under the vehicle body, the top of
the jack head contacts the vehi-
cle’s underbody without the rail
contacting the bottom of the
groove.
Insert the jack lever and attach
the lug wrench to tire jack.
Turn the jack handle clockwise
and raise the vehicle high
enough so that the spare tire
can be installed. Before remov-
ing the lug nuts, make sure
your Toyota is firmly in position
and that it cannot slip or move.
Remove the lug nuts by turning them counterclockwise; then
remove the wheel and center cap.
Tire blocks
Jacking
position6
7
8
9

YARIS_YARIS HATCHBACK_OM_OM99V59z_(U)
4676-2. Flat Tire
6
If Trouble Arises
WARNING
■When jacking-up a vehicle, always shift the shift lever to 1st or R
position (manual transaxle vehicle) or shift the selector lever to P
position (automatic transaxle vehicle), apply the parking brake , and
place wheel blocks in the position diagonally opposed to the ja ck
Changing a flat tire without using wheel blocks is dangerous be cause
the vehicle may move and fall of f the jack even with the shift lever in 1st
or R position, or the selector l ever is in P position, which co uld result in
an accident.
■Use only the front and rear jacking positions recommended in th is
manual
Attempting to jack the vehicle in positions other than those recom-
mended in this manual is dangerous. The vehicle could slip off the jack
and seriously injure or even kill someone. Use only the front and rear
jacking positions recommended in this manual.
■Do not jack up the vehicle in a position other than the designa ted
jack-up position or place any objects on or under the jack
Jacking up the vehicle in a position other than the designated jack-up
position or placing objects on or under the jack is dangerous a s it could
deform the vehicle body or the vehicle could fall off the jack resulting in
an accident.
■Use only the jack provi ded with your Toyota
Using a jack that is not designe d for your Toyota is dangerous. The vehi-
cle could slip off the jack and seriously injure someone.
■Never place objects under the jack
Jacking the vehicle with an objec t under the jack is dangerous. The jack
could slip and someone could be seriously injured by the jack o r the fall-
ing vehicle.
■Do not jack up the vehicle higher than is necessary
Jacking up the vehicle higher than is necessary is dangerous as it could
destabilize the vehicle resulting in an accident.
■Do not start the engine or shake the vehicle while it is jacked up
Starting the engine or shaking the vehicle while it is jacked u p is danger-
ous as it could cause the vehicle to fall off the jack resulting in an acci-
dent.
■Never go under the vehicl e while it is jacked up
Going under the vehicle while it is jacked up is dangerous as i t could
result in death or serious injur y if the vehicle were to fall off the jack.
Damage could occur during installation if the wheel cover is no t properly
aligned.