2020 TOYOTA SUPRA Owners Manual (in English)

1514
FEATURES & OPERATIONS
Normal mode
Balanced tuning between dynamic and efficient driving.
“SPORT” mode
Dynamic tuning for higher agility with an optimized chassis and suspensi\
on. Press
this switch and the “SPORT” indicator illuminates in the instrument cluster.
Sport mode
Launch control
CUSTOMIZE SETTING
Customize settings can be adjusted in the customize driving mode.
Via Toyota Supra Command:
1) “My vehicle”
2) “Vehicle settings”
3) “Configure SPORT INDIVIDUAL”
4) Select the desired setting.
Reset Customize to the standard settings:
“Reset to SPORT STANDARD”
Refer to the Owner’s Manual for limitations and more details.
Sport mode button
The VSC/Traction mode OFF switch can be used to deactivated the Vehicle \
Stability
Control, driving stability is reduced during acceleration and when drivi\
ng in curves.
To disable both VSC/Traction mode system, press and hold switch until VSC
OFF is displayed in the instrument cluster and the VSC OFF/TRACTION indi\
cator
light is illuminated.
Refer to the Owner’s Manual for limitations and more details.
The use of Launch Control causes premature component wear since this fun\
ction
represents a very heavy load for the vehicle.
Do not use Launch Control during the break-in, it is not intended for us\
e on public
roads. Do not use Launch Control unless driving conditions are appropria\
te for the
increased acceleration the feature provides. Keep steering wheel straigh\
t when
driving with Launch Control activated.
Start with Launch control:
1) Switch on drive-ready state.
2) Press the sport button.
3) Press button
4) Select the D selector lever position.
5) Firmly depress the brake pedal with your left foot.
6) Fully depress and hold the accelerator pedal at the kickdown position.
7) The engine speed will be adjusted for launching. Release the brake pedal within
3 seconds.
Refer to the Owner’s Manual for limitations and more details.
Vehicle Stability Control (VSC)/
Traction mode OFF switchAuto Start/Stop function OFF switch
After each engine start using the Start/Stop button, the Auto Start/Stop\
function is
ready. The function is activated from speeds of approx. 3 mph/5 km/h.
To deactivate the system, press the “Auto Start/stop function OFF” button.
Press the button
VSC OFF button
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Door locks - central locking system
Lock
Unlock

1716
FEATURES & OPERATIONS
Cruise controlDynamic Radar Cruise Control (if equipped)
BUTTONS ON THE STEERING WHEEL
BUTTONS ON THE STEERING WHEEL
FUNCTIONS
Cruise control on/off button
Cruise control on/off button
Continue with the last setting/pause Cruise control
Continue with the last setting/pause Cruise control
Store current speed
Store current speed
Reduce distance, switch distance control on/off
Rocker switch: Set speed
Increase distance, switch distance control on/off
Rocker switch: Set speed
Setting the speed
Press the rocker switch up or down once while the system is interrupted.\
Changing the speed
Press the rocker switch up or down repeatedly until the desired speed is\
set.
• Each time the rocker switch is pressed to the resistance point, the\
desired speed
increases or decreases by 1 mph/1 km/h.
• Each time the rocker switch is pressed past the resistance point, t\
he desired
speed changes by a maximum of 5 mph/10 km/h.
Radar sensorCamera
The radar sensor is located in the
front bumper.
Using Cruise control system, a desired speed can be adjusted using the b\
uttons
on the steering wheel. The system maintains the desired speed.
Using Dynamic Radar Cruise Control with Stop & Go function system, a desired
speed and a distance to a vehicle ahead can be adjusted using the button\
s on the
steering wheel.
The system maintains the desired speed on clear roads. For this purpose,\
the
vehicle accelerates or brakes automatically.
The camera is installed near the
interior mirror.
FUNCTIONS
Setting the speed
Press the rocker switch up or down once while the system is interrupted.\
Changing the speed
Press the rocker switch up or down repeatedly until the desired speed is\
set.
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Refer to the Owner’s Manual for limitations and more details on this system.

1918
Windshield wipers
Lights & turn signals
Right turn
Light switch element
Left turn
HIGH BEAMS, HEADLIGHT FLASHER
TURN SIGNALS
1 Forward/backward, height, seat tilt
2 Driver’s seat memory
3 Backrest tilt
4 Backrest width
5 Lumbar support
0 Resting position of the wipers
1 Rain sensor
2 Normal wiper speed
3 Fast wiper speed
Switching off:
press the lever down until it reaches its
standard position.
Brief wipe:
press the lever down from the standard
position.
Turn the thumbwheel to adjust.
The light switch element is located next
to the steering wheel.
ELECTRICALLY ADJUSTABLE
SWITCH OFF
ADJUST SENSITIVITY OF THE RAIN SENSOR
Refer to the Owner’s Manual for more information.
Parking lights.
Automatic headlight control.
Low beams.
Right roadside parking light.
Left roadside parking light.
Instrument lighting.
Lights off. Daytime running lights.
Push the lever forward or pull it
backward.
• High beams on, arrow 1. The high
beams light up when the low beams
are switched on.
• High beams off/headlight flasher,
arrow 2.
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Seat adjustments
FEATURES & OPERATIONS
LIGHTS SWITCHES

2120
Head-up Display (if equipped)
Matte Paint Care (if equipped)
This system projects important information into the driver’s field of\
vision, for
instance the speed. The driver can get information without averting his \
or her eyes
from the road.
Only use cleaning and care products suitable for vehicles with matte fin\
ish.
• Working from top to bottom, liberally apply water to the vehicle bo\
dy, wheel wells
and underside of the vehicle to remove any dirt and dust.
• Wash the vehicle body using a sponge or soft cloth, such as a chamo\
is.
• For hard-to-remove marks, use a neutral detergent and rinse thoroug\
hly with
water.
• Wipe away any water.
• Never use wax or abrasive compounds.
Refer to the Owner’s Manual for more details.
To turn system on/off via Toyota Supra Command:
1) “My vehicle”
2) “System settings”
3) “Displays”
4) “Head-up display”
5) “Head-up display”
• Speed.
• Navigation instructions.
• Vehicle messages.
• Selection list in the instrument cluster.
• Driver assistance systems.
Refer to the Owner’s Manual for more details on this system before attempting to
use it.
Air conditioning/heating
Seat heaters (if equipped)
For more details, refer to the Owner’s Manual.
Rear window defrosterRecirculate-air mode
Decrease fan speed/Climate control OFF*
* Press and hold to OFF.
Air distribution control (passenger’s side)Air distribution control (driver’s side)
Defrost and defog windshieldMaximum cooling
Automatic climate control ON
Adjust the temperature setting, and airflow
vents and fan will adjust automatically.
Air Conditioning
ON/OFFIncrease fan speed
Temperature selector (driver’s side)Temperature selector (passenger’s side)
ON - Press the button once for each temperature level.
OFF - Press and hold.
Seat heater switchSeat heater switch
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
FEATURES & OPERATIONS
FOLLOWING INFORMATION ON THE DISPLAY

2322
FEATURES & OPERATIONS
Power outlet - 12V
USB media port
The USB media port is located on the center console.
Properties:
• USB media port Type A.
• For charging external devices.
• Charging current: max. 1.5 A (vehicles without wireless charger) max. 2.1 A (vehicles with wireless charger)
• For data transfer.
The total load of all sockets must not exceed 140 watts at 12 volts.
The lighter socket can be used as a socket for electrical equipment when\
standby
and drive-ready state are switched on.
Center console
Clock
Audio
1 Changing the entertainment source
2 Sound output on/off, volume
3 Programmable memory buttons
4 Change station/track
5 Waveband/satellite radio
Setting the time via Toyota Supra Command:
1) “My Vehicle”
2) “System settings”
3) “Date and time”
4) “Time”
5) Turn the Controller until the desired hours are displayed.
6) Press the Controller.
7) Turn the Controller until the desired minutes are displayed.
8) Press the Controller.
Refer to the Owner’s Manual for other settings.
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Qi-compatible Wireless Charger (if equipped)

2524
FEATURES & OPERATIONS
Park assistance button(on/off manually)
Camera
Rearview camera
The rearview camera system displays an image of the view from the bumper\
of the
rear area of the vehicle. The camera for the rearview monitor system is \
located near
the license plate.
Switching on automatically:
The system is switched on automatically if selector lever position R is \
engaged
when the engine is running. (The system switches off when a certain dri\
ving
distance or speed is exceeded.)
Switching on/off manually:
Press button.
Switching via Toyota Supra Command:
1) If necessary, tilt the controller to the side.
2) “ Rear view camera”
Refer to the Owner’s Manual for limitations and more details on this system.
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Driving stability control systems
This chapter describes all standard and optional features offered with t\
he series.
It also describes features and functions that are not necessarily availa\
ble in your
vehicle, e.g., due to the selected options. This also applies to safety-\
related
functions and systems. When using these functions and systems, the appli\
cable
laws and regulations must be observed.
Refer to the Owner’s Manual for more details and important informatio\
n on
limitations to these systems.
ABS prevents locking of the wheels during braking.
The vehicle maintains its steering power even during full brake applicat\
ions, thus
increasing active safety.
ABS is operational every time you start the engine.
See OM for situations which the ABS cannot operate sufficiently.
When you apply the brakes rapidly, the system automatically produces the\
greatest
possible braking force boost. It reduces the braking distance to a minim\
um during
emergency stops. This system utilizes all of the capabilities provided b\
y the Anti-
lock Brake System ABS.
Do not reduce the pressure on the brake pedal for the duration of the em\
ergency
stop.
ANTI-LOCK BRAKING SYSTEM (ABS)
BRAKE ASSIST
ADAPTIVE BRAKE ASSIST
DRIVE-OFF ASSIST
VEHICLE STABILITY CONTROL SYSTEM (VSC)
In combination with Dynamic Radar Cruise Control, this system ensures th\
at the
brakes respond even more rapidly when braking in critical situations.
This system supports driving off on uphill grades.
Depending on the vehicle loading, the vehicle may roll back slightly.
Within the physical limits, the system helps to keep the vehicle on a st\
eady course
by reducing engine speed and by braking the individual wheels.
TRACTION MODE
ACTIVE DIFFERENTIAL
Traction mode is a version of the VSC Vehicle Stability Control System w\
here
forward momentum is optimized. The system ensures maximum headway on
special road conditions or loose road surfaces, for instance unplowed sn\
owy roads,
but with somewhat limited driving stability.
The active differential steplessly locks the rear axle depending on the \
driving
conditions. This provides optimal power transfer in all driving conditio\
ns by helping
prevent wheel spin at either rear wheel. The driver is responsible adapt\
ing
his or her driving style to the situation.

2726
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Supra Safety
Supra Safety enables central operation of the driver assistance system.
Supra Safety consists of one or more systems that can help mitigate or p\
revent an
imminent collision (depending on how the vehicle is equipped).
• Pre-Collision System with Pedestrian Detection
• Lane Departure Warning with Steering Assist
• Automatic High Beams
• Brake Assist
• Blind Spot Monitor (if equipped)
Some Supra Safety systems are automatically active after every departure\
. Some of
the systems activate according to the last setting.
When press and hold the switch, all Supra Safety systems are switched of\
f.
Refer to the Owner’s Manual for more details and important informatio\
n on
limitations to these systems.
THE LOCATION OF THE SAFETY SYSTEM SWITCH
SWITCHING THE SYSTEM ON/OFF
Supra Safety switch
Orange indicator: Some systems are switched off or currently unavailable\
.
No indicator: All systems are switched off.
Green indicator: All systems are switched on.
The system is designed to help mitigate or prevent accidents involving o\
ther
vehicles, pedestrians and cyclists. If an accident cannot be prevented, \
the system
may help reduce the impact speed. The system sounds a warning in the cit\
y speed
range before an imminent collision and activates brakes independently, i\
f needed.
The system is controlled by the following sensors:
• Camera in the area of the interior mirror
• Radar sensor in the front bumper (if equipped)
Pre-Collision System with Pedestrian
Detection
Radar sensor (if equipped)Camera
Refer to the Owner’s Manual for limitations and more details on this system.
The camera system is designed to help detect a bicyclist in daytime cond\
itions and
a pedestrian in daytime and low-light conditions using the forward-facin\
g camera.
DRIVER ASSIST PACKAGE (IF EQUIPPED)
The Driver Assist package adds additional features including a forward f\
acing
millimeter radar sensor and Full-Speed Dynamic Radar Cruise Control. Thi\
s feature
enhances the speeds with which the Pre-Collision System operates in rega\
rds to
vehicle detection and collision mitigation.
Full-Speed Dynamic Radar Cruise Control:
• Enhances the Pre-Collision System vehicle detection capability, all\
owing it to
provide braking intervention at speeds up to 155 mph.
• Enhances the Pedestrian Detection capability, allowing it to provide bra\
king
intervention at speeds up to 53 mph.
* The Pre-Collision System may only apply a brake pulse above 130 mph.
SUPRA SAFETY

2928
SUPRA SAFETY
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
WARNING WITH BRAKING FUNCTION
The system’s detection potential is limited. Only objects that are de\
tected by the
system are taken into account. Thus, a system reaction might not come or\
might
come late.
The following situations may not be detected, for instance:
• Slow moving vehicles when you approach them at high speed.
• Vehicles that suddenly swerve in front of you, or sharply decelerat\
ing vehicles.
• Vehicles with an unusual rear appearance.
• Two-wheeled vehicles ahead of you.
Flashes red indicator and an acoustic signal sounds: Acute warning.
Brake and make an evasive maneuver, if necessary.
Red indicator: Prewarning. Brake and increase distance.
Detected vehicles:
Detected vehicles:
Detected pedestrians or cyclists:
If a collision with a detected vehicle or a pedestrian or a cyclist is i\
mminent, a
warning symbol appears on the instrument cluster and in the Head-up Disp\
lay (if
equipped.)
Alternatively, depending on the vehicle equipment, a red warning triangl\
e
lights up in the instrument cluster.
The red symbol is displayed and a signal sounds.
DETECTION RANGE & UPPER SPEED LIMIT
Detected pedestrians or cyclists:
The detection area in front of the vehicle is divided into two areas:
• Central area, arrow 1, directly in front of the vehicle.
• Expanded area, arrow 2, to the right and left of the central area.
A collision is imminent if pedestrians are located within the central ar\
ea. A warning
is issued about pedestrians who are detected within the extended area on\
ly if they
are moving in the direction of the central area.
SWITCHING THE SYSTEM ON/OFF
SETTING THE WARNING TIME
Switching on automatically:
The system is automatically active after every driving off.
Switching on/off manually:
Press button. The menu for the Supra Safety system is displayed.
When press and hold the switch, all Supra Safety systems are switched of\
f.
Setting the warning time via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Supra Safety”
4) “Front collision warning”
5) Select desired setting:
• “Early”
• “Medium”
• “Late”: only acute warnings are displayed.