2020 TOYOTA RAV4 warning
[x] Cancel search: warningPage 8 of 64
6
OVERVIEW
Indicator symbols
For details, refer to “Indicators and warning lights,” Section 2-1, 2020 Owner’s
Manual.
Blind Spot Monitor (BSM) indicator4
BSM outside rear view mirror
indicators1,4
Brake system warning1
Charging system warning1
Brake system warning1
[Yellow]
Fuel tank door position Airbag ON/OFF indicator
1
Anti-lock Brake System (ABS)
warning1
Automatic High Beam (AHB)
indicatorECO drive mode indicator
Electric power steering system
warning1 [Red/yellow]
Intuitive parking assist OFF
indicator2,4
Front and Rear Parking Assist
with Automated Braking OFF
indicator
1,2,4,5
Brake hold operating indicator1,2
Brake hold standby indicator1
Downhill assist control system
indicator1,3,4
Brake Override System/Drive-Start
Control/Front and Rear Parking
Assist with Automated Braking
4,5
warning
Driver’s and front passenger’s seat
belt reminder
(alarm will sound when
the engine switch is ON mode)Airbag SRS warning1
Fog light indicator4
High coolant temperature warningHeadlight low/high beam
indicators
Eco driving indicator1
Constant speed cruise control
indicator/Constant speed
cruise control SET indicator
Full-Speed Range Dynamic
Radar Cruise Control (DRCC)
indicator/DRCC SET indicator
Page 9 of 64
1
If the indicator does not turn off within a few seconds of starting the engine, there may be a
malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner’s Manual.3 If the indicator flashes, it indicates that the system is operating.4 If equipped.5
Refer to section PKSB (Parking Support Braking function) in the Owner’s Manual.
7
Low outside temperature indicator
Pre-Collision System (PCS)
warning1,2
Vehicle Stability Control (VSC) OFF
indicator1
Slip indicator1,3
SPORT mode indicator
Stop & Start indicator1,4
Stop & Start cancel indicator1,2,4
RCTA OFF indicator1,2,4
Rear passengers’ seat belt
reminder
Parking brake indicator2
Mud & sand mode indicator4
Rock & dirt mode indicator4
Snow mode indicator4
Smart Key system indicator4
Security indicator
Turn signal indicator
Lane Tracing Assist (LTA)/
Lane Departure Alert (LDA)
indicator [Orange]
Low engine oil pressure warning
Low fuel level warning
Low Tire Pressure Warning1
Malfunction/Check Engine
indicator1
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Page 27 of 64
25
Refer to the Owner’s Manual for more information.
Driving support system information
display areaDriving support system information
display area
Information display area Information display
area
4.2-inch display 7-inch display
Push MID control switches to view or change information in the following:
Driving support system information Driving information
Vehicle information " V E J P T Z T U F N M J O L F E E J T Q M B Z J G F R V J Q Q F E
Settings display
Warning message display
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Multi-Information Display (MID)
Enter/Set:
Press to enter/set, press and hold to resetReturn to previous screen
“” and “” Press to select an
item/change pages
Menu icons
Menu icons
Page 32 of 64
30
FEATURES & OPERATIONS
If the sensors detect an obstacle, the buzzer and MID or navigation system
display informs the driver of the approximate position and distance of the obstacle
C Z J M M V N J O B U J O H D P O U J O V P V T M Z G B S
P S C M J O L J O H O F B S
% F Q F O E J O H P O Z P V S " V E J P
Multimedia system, you can adjust settings.
To turn system ON/OFF:
Press “
/ ” or “ / ” and “” of the meter control switches and select
“
” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
4 F M F D U
and press “”. The system displays when the the system is
operational.
Refer to the Owner’s Manual for limitations and more details.
Refer to all of the section Parking Support Brake functions (static objects and rear-
crossing vehicles) in the Owner’s Manual for limitations and more details.
Front
center sensor
Rear
center sensor Corner sensors
(front)Corner sensors
(front)
Corner sensors
(rear)Corner sensors
(rear)
Intuitive Parking Assist (if equipped)
The Front and Rear Parking Assist with Automated Braking consists of the following
functions that operate when driving at a low speed or backing up, such as when
parking. When the system determines that the possibility of a collision with a
detected object is high, a warning operates to urge the driver to take evasive
action. If the system determines that the possibility of a collision with a detected
object is extremely high, the brakes are automatically applied to help avoid the
collision or help reduce the impact of the collision.
CHANGE SETTINGS
Use “ / ” or “ / ” and “” of the meter control switches to select “”
and
J O U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
U P D I B O H F T F U U J O H T 5 I F T Z T U F N X J M M
D P O U J O V F J O U I F M B T U T U B U F J U X B T J O 0 / P S 0 ' '
X I F O U I F F O H J O F J T T U B S U F E B H B J O
Front and Rear Parking Assist with
Automated Braking
(if equipped)
Page 39 of 64
37
Radar sensorCamera sensor
Sensors
TSS 2.0 combines an in-vehicle camera mounted in front of the inside rear view
mirror and a radar mounted in the front grille. These sensors support the driver assist
systems.
The Pre-Collision System uses a radar sensor and camera sensor to help detect a
vehicle or pedestrian or bicyclist in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control performance that
this system can provide, do not overly rely on this system. This system will not prevent
collisions or lessen collision damage or injury in every situation. Do not use PCS
instead of normal braking operations under any circumstances. Do not attempt to test
the operation of the Pre-Collision System yourself, as the system may not operate or
engage, possibly leading to an accident. In some situations, such as when driving in
inclement weather such as heavy rain, fog, snow or a sandstorm or while driving on a
curve and for a few seconds after driving on a curve, a vehicle or pedestrian or bicyclist
may not be detected by the radar and camera sensors, preventing the system from
operating or engaging properly.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system may not operate properly.
Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a buzzer
will sound and a warning message will be displayed on the Multi-Information Display
(MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional braking
force using Brake Assist. This system may prime the brakes and may apply greater
braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision System with
Pedestrian Detection (PCS w/PD)
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Page 42 of 64
40
TOYOTA SAFETY SENSE™
LDA in TSS 2.0 uses an in-vehicle camera designed to detect visible white and
yellow lane markers or road edge in front of the vehicle and the vehicle’s position
on the road. If the system determines that the vehicle is starting to unintentionally
deviate from its lane, the system alerts the driver with an audio and visual alert.
When the alerts occur, the driver must check the surrounding road situation and
carefully operate the steering wheel to move the vehicle back to the center part of
their lane.
- % " J T E F T J H O F E U P G V O D U J P O B U T Q F F E T P G B Q Q S P Y J N B U F M Z N Q I L N I
P S I J H I F S
on relatively straight roadways.
In addition to the alert function, LDA w/SA also features a steering assist
function. When enabled, if the system determines that the vehicle is on a path to
unintentionally depart from its lane, the system may provide small corrective steering
inputs to the steering wheel for a short period of time to help keep the vehicle in its
lane.
If the vehicle repeatedly deviates from the lane, the vehicle drifts within the lane due
to inattention, or the driver abruptly operates the steering wheel after an inattentive
period, when enabled, the vehicle sway warning function alerts the driver with an
audio and visual alert, urging them to take a break.
Lane Departure Alert with Steering Assist
(LDA w/SA)
TURNING THE LDA SYSTEM ON/OFF
Press the LDA switch to turn the LDA system on. Depress again to turn it off.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
Page 44 of 64
42
ADJUSTING LDA ALERT SENSITIVITY
DISABLING STEERING ASSIST
TOYOTA SAFETY SENSE™
SWAY WARNING SYSTEM
1 S F T T “ ” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select “ LDA” and then press “.”
1 S F T T “
” switches and select the “Steering Assist” setting function and then
press “
.”
1 S F T T “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
5 I F E S J W F S D B O B E K V T U U I F T F O T J U J W J U Z P G U I F - % " X B S O J O H
G V O D U J P O G S P N U I F
. V M U J * O G P S N B U J P O % J T Q M B Z . * %
D V T U P N J [ B U J P O T D S F F O
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
1 S F T T “
” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select “ LDA” and then press “.”
1 S F T T “
” switches and select the “Sensitivity” setting function and then
press “
.”
1 S F T T “
” to go back to the menu.
SWS is a function of LDA and is designed to detect swaying based on the vehicle
location in the lane and the driver’s steering wheel operation. To help prevent
swaying, the system alerts the driver using a buzzer sound and a warning displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
Page 45 of 64
43
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING LDA SWAY WARNING ALERT
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
1 S F T T “ ” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select “ LDA” and then press “.”
1 S F T T “
” switches and select the “Sway Sensitivity” setting function and then
press “
.”
1 S F T T “
” to go back to the menu.
1 S F T T “
” switches and select “” G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T “
” switches and select “ LDA” and then press “.”
1 S F T T “
” switches and select the “Sway Warning” setting function and then
press “
.”
1 S F T T “
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.