2020 TOYOTA PRIUS PRIME service reset

362-2. Connectivity settings
be changed to a desired
name. (P. 3 6 )
PIN code used when the
Bluetooth
® device was regis-
tered. Can be changed to a
desired code. ( P.36)
Device address is unique to
the device and cannot be
changed.
Select to set the connection
status display of the phone
on/off.
Select to set the connection
status display of the audio
player on/off.
Compatibility profile of the
system
Select to reset all setup
items.
■Editing the system name
1 Select “System Name”.
2 Enter a name and select
“OK”.
■Editing the PIN code
1 Select “System PIN Code”.
2 Enter a PIN code and select
“OK”. 1
Enable the Wi-Fi® Hotspot
function. ( P. 3 7 )
2 Disable the “Hide Access
Point” function. ( P. 3 7 )
3 Search for the vehicle access
point using the device you
wish to connect.
 For details about operating
the device, refer to the docu-
mentation which came with it.
4 Operate the device to con-
nect it to the vehicle access
point.
B
C
D
E
F
G
Wi-Fi® Hotspot
By connecting a device to
the vehicle via Wi-Fi
®, it can
access the internet through
the DCM.
 To use this function, a
Wi-Fi
® Hotspot service sub-
scription from Verizon Wire-
less is required. Contact
your Toyota dealer for
details.
 This function is not made
available in some countries
or areas.
Connecting a device to
the in-vehicle access
point
Searching for and con-
necting a device to the
vehicle access point

382-2. Connectivity settings
Select to check/change the
access point password.
(P. 3 8 )
Select to display hints for
connecting to the vehicle via
Wi-Fi
®.
Select to make the access
point searchable/unsearch-
able.
Select to check/change the
security protocol of the
access point (for authentica-
tion and encryption). ( P. 3 9 )
Select to change the access
point name (SSID). ( P. 3 9 )
Select to change the Wi-Fi
®
connection channel (within
the 2.4GHz frequency band).
( P. 3 9 )
●If any settings have been
changed, it will be necessary to
reset the Wi-Fi
® system to com-
plete the changes. To reset the
Wi-Fi
® system, select “Yes” on the
pop-up displayed after changing
the settings.
When the Wi-Fi® Hotspot func-
tion is enabled, the system
checks for a valid Hotspot ser-
vice subscription.
If a Hotspot service subscription
has not been started, start the
Toyota Entune App Suite Con-
nect application to activate the service subscription. (If the Toy-
ota Entune App Suite Connect
application has not been
installed, install the application.)
Contact your Toyota dealer for
details about the Toyota Entune
App Suite Connect application.
1
Select “Password”.
2 Check that the following
screen is displayed.
Displays the password
Select to display/hide the
entered password.
Select to change the pass-
word.
1 Select “Change Password”.
2 Enter the desired password
and select “OK”.
 When setting/changing a
password, observe the follow-
ing guidelines to help prevent
the password from being
cracked by a third party:
Enabling/disabling the
Wi-Fi
® Hotspot function
B
C
D
E
F
G
&KHFNLQJFKDQJLQJWKH
SDVVZRUG
&KDQJLQJWKHSDVVZRUG
A
B
C

643-2. Radio operation
Did you know? SiriusXM also
delivers a wide var iety of services
to certain vehicles’ entertainment
and navigation systems such as
Traffic, Weather, Sports Scores,
Movie Listings, Fuel Prices, Stock
Prices and more. For a list of
available features in your vehicle,
visit siriusxm.com/infotainment

and get the most out of your driv-
ing experience.
●RADIO OPERATION
• Look for the Sirius, XM, SiriusXM, Band, SAT, AUX, Radio or Source
button and you’re in. If you can’t
hear us, it’s easy to get started:
Locate your Radio ID by turning to
Channel 0. If you don’t see your
number there, go to siri-
usxm.com/activationhelp to find it.
Visit siriusxm.com/refresh
or call
1-855-MYREFRESH (697-3373)
to send a refresh signal to your
radio.
Canadian Customers:
Locate your Radio ID by turning to
Channel 0.
Visit siriusxm.ca/refresh
to send a
refresh signal to your radio or call
1-888-539-7474 for service.
Each SiriusXM tuner is identified
with a unique radio ID. The radio
ID is required when activating
an SiriusXM Satellite service or
when reporting a problem.
 If “Ch 000” is selected using
the “TUNE SCROLL” knob, the ID code, which is 8 alpha-
numeric characters, will be
displayed. If another channel
is selected, the ID code will no
longer be displayed. The
channel (000) alternates
between displaying the radio
ID and the specific radio
code.
Up to 20 channels can be regis-
tered as presets in the cache.
For channel registration, refer to
( P.81).
1 Select channels registered to
smart favorites.
2 Select “SXM Replay”.
●Caches up to 30 minutes for each
Smart Favorite preset.
●The radio plays the track from
start when that track has not previ-
ously been heard by the user and
the station is registered as a smart
favorite.
●When “SXM Tune Start” is turned
on ( P.60), the current song is
played from the beginning when
you select the channel.
●Displays icons on the channels
registered to smart favorites.
(  P. 5 8 )
When problems occur with the SiriusXM tuner, a message will
appear on the screen. Referring to the table below to identify the
problem, take the suggested corrective action.
Displaying the radio ID
Smart favorites
Refer to the table below to identify the problem and take
the suggested corrective action

1517-1. Toyota Entune overview
7
Toyota Entune
nect and the applications, refer to
http://www.toyota.com/Entune/
in the United States, and
http://www.toyota.ca/entune
in Canada.
●These functions are not made
available in some countries or
areas. Availability of functions of
the Toyota Entune App Suite Con-
nect service is dependent on net-
work reception level.
■Initializing personal data
The personal data used in appli-
cations can be reset. ( P.47)
 The following personal data
can be deleted and returned
to their default settings:
• Downloaded contents
• Radio stations that were listened
to
●Once initialized, the data and set-
tings will be erased. Pay much
attention when initializing the data.
■Settings required to use
Toyota Entune App Suite
Connect
Perform the settings in the fol-
lowing order.
1 Download the Toyota Entune
3.0 App Suite Connect appli-
cation to your smartphone or
the system.
2 Register the smartphone with
the system.
In order to use To yota Entune 3.0 App Suite Connect, the following
must first be performed:

Register a Bluetooth® phone
with the hands-free system.
( P.25)
●Applications can only be used
when the Toyota Entune 3.0 App
Suite Connect application has
been downloaded to your smart-
phone or the system, and the
application is running.
●Toyota Entune 3.0 App Suite Con-
nect operational procedures can
also be confirmed by visiting
http://www.toyota.com/Entune/
in the United States, and
http://www.toyota.ca/entune
in Canada.
●If a Toyota Entune 3.0 App Suite
Connect applicatio n is used while
iPod audio/video is being played
back, system operation may
become unstable.
Preparation before using
Toyota Entune App Suite
Connect

162Alphabetical Index
Alphabetical Index
A
AM/FM/SiriusXM (SXM) radio .. 58
Available HD Radio™ technol- ogy ....................................... 62
Caching a radio program........ 59
Displaying the radio ID ........... 64
HOW TO SUBSCRIBE TO Siri- usXM Radio Services ........... 63
Overview ................................ 58
Presetting a station ................ 59
Radio broadcast data system. 60
Radio options ......................... 60
Refer to the table below to iden- tify the problem and take the
suggested corrective action . 64
Selecting a station from the list ............................................. 60
Smart favorites ....................... 64
Troubleshooting guide ............ 62
Using HD Radio™ technology 61
Apple CarPlay ........................... 41 Establishing an Apple CarPlay connection ............................ 41
Troubleshooting...................... 42
“Apple CarPlay” button (“Menu” screen) .............................. 10, 41
“Apps” button (“Menu” screen) ......................................... 10, 155
“APPS” button ........ ............8, 155
Audio/visual remote controls .. 79
“Audio” button (“Menu” screen) ........................................... 10, 52
“Audio” button (“Setup” screen) ........................................... 13, 81
“AUDIO” button .............. 8, 52, 53
Audio settings .......................... 81 Audio settings screen ............. 81
Displaying the audio settings screen .................................. 81
AUX ............................................ 77 Overview ................................ 77
B
Basic function .............................8
Basic information before opera-tion ...........................................16
Basic operation.........................52
Bluetooth
® audio ......................74
Overview ................................74
Registering/Connecting a Blue-
tooth
® device ........................76
Bluetooth
® phone message func-
tion .........................................127 Calling the message sender .130
Checking received messages ...........................................128
Displaying the message screen
...........................................127
Receiving a mess age ...........128
Replying to a message (dicta- tion reply)............................129
Replying to a message (quick reply) ..................................130
“Bluetooth” button (“Setup” screen) ...............................13, 29
Buttons overview........................8 Operations of each part ............8
C
CD ..............................................67Overview ................................67
Command list ............................99 Command list overview ..........99
Connectivity settings ...............25
D
“Display” button (“Menu”
screen) ...............................10, 23