KEYLESS ENTRY
1Lock/Arm
• Pressing this button will lock all doors, trunk and activate
the security alarm.
• If any of the doors or the trunk are not fully closed, five rapid
chirps will sound and the hazard warning flashers will flash.
• Pressing this button three times (within five seconds) will
activate the vehicle finder function. If you are within 30 feet
of your Subaru, the horn will sound once, and the hazard
warning flashers will flash three times.
2Unlock/Disarm
• Pressing this button once will unlock the driver’s door and
fuel door if set to do so in the Touchscreen.
• Pressing this button twice (within five seconds) will unlock
all doors and trunk.
• When you press this button, the interior lights will illuminate,
if set to the “DOOR” position on the overhead console
switch.
3Trunk
• Pressing and holding this button will open the trunk only.
4Panic Alarm
• Pressing this button will sound the horn and flash the
hazard warning lights.
• Press any button on the access key fob or transmitter to
deactivate.
Access Key Fob
Transmitter
ENTRY AND EXIT
4
IGNITION SWITCH
The ignition switch has four positions:
LOCK:You can only insert or remove the key in this position.
ACC (Accessory):Provides power to the radio and accessory power outlets.
ON:All electric systems are available. The key returns to this position after starting the
engine.
START:Turn the key to this position to start the engine.
PUSH-BUTTON IGNITION SWITCH(IF EQUIPPED)
Each time you press the ignition switch without
depressing the brake pedal, the ignition position
will change as follows: ACC, ON, OFF.
ACC (Accessory):Provides power to the radio
and accessory power outlets. Orange indicator
illuminates.
ON:All electrical systems will be available.
Orange indicator illuminates.
OFF:Power off and indicator off.
STARTING THE ENGINE
Without Push-button Ignition
To start the engine:
1. Make sure the select lever is in the “P” position or “N” and depress the clutch for
manual transmission vehicles.
2. Using the key, turn the ignition switch to “START”. NOTE: Do not depress the
accelerator pedal. Release the key as soon as the engine starts.
With Push-button Ignition
To start the engine:
1. Sit in the driver’s seat with the access key fob.
2. Make sure the select lever is in the “P” position or “N” for manual transmission vehicles.
3. Depress the brake pedal (and clutch pedal for manual transmission models). Green LED
on the ignition switch illuminates.
4. While depressing the brake pedal (and clutch pedal for manual transmission models),
briefly press and release the ignition switch.
OPERATING THE VEHICLE
23
