Page 137 of 194
Rear view camera
Functionality
When reversing, the area behind the vehicle is dis-
played in the Infotainment screen complete with ori-
entation lines.
The camera is equipped with a cleaning system.
Cleaning takes place automatically when the rear
window is washed.
Orientation lines and functional surfaces
Orientation lines
ADistance about 40 cmBDistance about 100 cmCDistance about 200 cm
The distance between the side lines corresponds ap-
proximately to the vehicle width including mirrors.
Function surfaces
Brightness, contrast and colour settings of the
screenTurns o
Page 138 of 194
Vehicle without Park Pilot
If an approaching vehicle is detected in the area be-
hind your vehicle, the a warning is displayed in the in-
strument cluster display, indicating to the driver to
monitor the traffic behind. At the same time, an
acoustic signal sounds.
Operating conditions
q No accessories are connected to the trailer sock-
et.
Function restriction
Manoeuvre Assist
Page 139 of 194
Park backwards longitudinallyPark backwards crosswisePark forwards across
The parking mode can be changed by pressing the
button .
Press the button again
and the system is switch-
ed o
Page 140 of 194
Engine, exhaust system and fuelBonnet
Opening the bonnet
Before opening
Page 141 of 194
Page 142 of 194
Page 143 of 194
power will be reduced, and the START-STOP func-
tion will not be available.
Filter cleaning
Conditions for cleaning
q The engine is warm.
q For vehicles with manual transmission, observe
the gear recommendation shown in the display of
the instrument cluster.
Procedure for vehicles with diesel engines
Page 144 of 194