2020 Seat Leon warning

Instruments and warning/control lamps
Power meter  V
alid for: hybrid vehicles Fig. 65
Digital instrument panel: Power meter The lower left hand side of the rev counter
has tw
o col
our coded areas:
Charge: Charging zone. Indicates the
amount of charge generated and the
maximum charge.
Power %: Electric traction zone. Indi-
cates the percentage of power used and
the maximum amount of power currently
available.
The power meter shows the usage level of
the electric drive. The power meter bar shows
the current usage level. Green
Blue A finer coloured border indicates how much
the propul

sion can currently be used. De-
pending on the selected driving program and
the current availability of electrical power,
the boundaries of the different colours can
vary.
The following displays can be seen on the
Power meter:
››› Fig. 65
The vehicle recovers electrical energy
Electric drive switched on / Boost (the ve-
hicle runs for a short time at the maximum
power of the electric motor and combus-
tion engine).
The combustion engine must be running.
Battery level indicator  V
alid f
or: hybrid vehicles Fig. 66
Digital instrument panel: battery level
indicat or

. A
B
C The small arrow next to the charging station
symbol indicat
es which side of the v

ehicle the
charging cover is on. Note

Instruments and warning/control lamps
cause for concern, provided the control
l amp does not light up

Warning area. When the engine is work-
ing hard, especially at high outside tem-
peratures, the diodes may light up in the
warning area.
The coolant temperature gauge only works
when the ignition is switched on.
In vehicles with digital instrument panel (SEAT
Digital Cockpit) you can select to view the
coolant temperature in the corresponding
menu ››› page 71
.
Control and warning lamp 
It lights up red

Operation
In vehicles with Services est ablished by
time or mil eage, the service intervals are
already pre-defined.
In vehicles with LongLife Service, the inter-
vals are determined individually. Thanks to
technological progress, maintenance work
has been greatly reduced. Because of the
technology used by SEAT, with this service
you only need to change the oil when the ve-
hicle so requires. To calculate this variation
(max. 2 years), the vehicle's conditions of use
and individual driving styles are considered.
The advance warning first appears 20 days
before the date established for the corre-
sponding service. The kilometres (miles) re-
maining until the next service are always
rounded up to the nearest 100 km (miles) and
the time is given in complete days. The cur-
rent service message cannot be viewed until
500 km after the last service. Prior to this, on-
ly lines are visible on the display.
Inspection reminder
If a service or an inspection has to be carried
out soon, a service reminder will be dis-
played when the ignition is switched on.
The figure displayed are the kilometres that
can still be travelled or the time until the next
service. Service due
When the time for a service
or an inspec-
tion comes, an audible warning will be emit-
ted when the ignition is switched on and the
fixed key symbol > may appear on the in-
strument panel for a few seconds, along with
one of the following messages:

Instruments and warning/control lamps
Note

Operation
Operation with the wiper lever Fig. 71
Wiper lever: control keys. As long as a priority 1
››
› page 76
warning is
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button ››› Fig. 71
1 .
Sel ect a menu or an inf

ormative display

Instruments and warning/control lamps
Fig. 73
Left side of the multifunction steering
wheel : butt
on for driver assistance systems
(depending on versions). With the turn signal and main beam headlight
l
e

ver button, you can activate or deactivate
the driver assistance systems displayed in the
Assistance systems menu .
Activating or deactivating a driver assis-
tance system using the turn signal lever
and main beam headlight

Operation
Yellow warning lamps

Instruments and warning/control lamps
>
Service interval display