2020 Seat Ibiza Owner's manual

Instruments and warning/control lamps
Classic View
The r e
volutions per minute and speedometer
needles appear along the entire length
››› Fig. 66.
View 1, 2, 3 or AUTOMATIC* 1)
Personalisation of the information that ap-
pears in the Digital SEAT Cockpit. Only 2 of
these items of information can be displayed
at the same time, but the user chooses which
to display, and in what order, by moving the
finger vertically over the dials.
Depending on the version, the Views can be
memorised by exiting the menu or keeping
the View button pressed.

Operation

Instruments and warning/control lamps
Indications of the compass
Depending on the equipment, when the igni-
tion is on, the instrument panel displ ay indi-
cat
es the direction in which you are driving
with a symbol, e.g. NW for Northwest.
When the Infotainment system is on and there
is no route guidance active, the graphic rep-
resentation of a compass is also shown.
Low consumption driving G*
Depending on the equipment, when the vehi-
cle is moving G is displayed on the instru- ment cluster display when the vehicle is in an
economical consumption status due to active
cylinder management (ACT®)* ››› page 209
.
Identifying letters on engine (LDM)
Vehicles with analogue instrument panel:

Operation
Service Menu  Applies t
o vehicles with Active Info Display
(Digit al SEAT Cockpit)
In the Service menu various settings can be
adjusted depending on the features.
Open the Service menu
To open up the Service menu, select the
Range information profile while in the Driv-
ing data menu, and keep the  key press-
ed on the multifunction st eering wheel f

or ap-
proximately 4 seconds. When it is released,
the Service menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Restart the service interval display
Select the Service menu and follow the in-
structions on the screen of the instrument
panel.
Restart the oil service
Select the Restore Oil service menu and
follow the instructions on the instrument pan-
el display. Restart journey data
Sel
ect the

Reset trip menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu Engine code . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display) The display of the travel data (multifunction
displ
ay) sho

ws different values about the
journey and the consumption.
Change from one display to another
Vehicles without multifunction steering wheel:

Instruments and warning/control lamps
exceeded (varies depending on the ver-
sion of the instrument panel), the memo-
ry is del et
ed.
Delete journey data presets

Operation
symbols may vary depending on the version
of the instrument panel.
Existing f aults can al
so be checked manually.
To do so, open the menu Vehicle status or
Vehicle
››› page 73
.
Priority 1 warning (red)
The symbol lights up or flashes (in part ac-
companied by audible warnings).

Instruments and warning/control lamps

Operation
Revolution counter The rev counter indicates the number of en-
gine r
e
volutions per minute.
Together with the gear-change indicator, the
rev counter offers you the possibility of using
the engine of your vehicle at a suitable
speed.
The beginning of the red zone of the rev
counter indicates the maximum speed in any
gear after running-in and with the engine hot.
However, it is advisable to change up a gear
or move the selector lever to D (or lift your
foot off the accelerator) before the needle
reaches the red zone ››› .
W e r

ecommend that you avoid high revs and
that you follow the recommendations on the
gear-change indicator. Consult the addition-
al information in ››› page 205, Selecting the
optimal gear. CAUTION