11. Manufacturers who consider or have reason to believe that radio equipment which they have placed on the market is not in conformity
with this Directive shall immediately take the corrective measures necessary to bring that radio equipment into conformity, to withdraw it or
recall it, if appropriate. Furthermore, where the radio equipment presents a risk, manufacturers shall immediately inform the competent
national authorities of the Member States in which they made the radio equipment available on the market to that effect, giving details, in
particular, of the noncompliance, of any corrective measures taken and of the results thereof.
12. Manufacturers shall, further to a reasoned request from a competent national authority, provide it with all the information and
documentation in paper or electronic form necessary to demonstrate the conformity of the radio equipment with this Directive, in a
language which can be easily understood by that authority. They shall cooperate with that authority, at its request, on any action taken to
eliminate the risks posed by radio equipment which they have placed on the market.
Ref RED 2014/53/EU Article 11 - Authorised representatives
1. A manufacturer may, by a written mandate, appoint an authorised representative.
The obligations laid down in Article 10(1) and the obligation to draw up technical documentation laid down in Article 10(3) shall not form
part of the authorised representative's mandate.
2. An authorised representative shall perform the tasks specified in the mandate received from the manufacturer. The mandate shall allow
the authorised representative to do at least the following:
(a) keep the EU declaration of conformity and the technical documentation at the disposal of national market surveillance authorities for 10
years after the radio equipment has been placed on the market;
(b) further to a reasoned request from a competent national authority, provide that authority with all the information and documentation
necessary to demonstrate the conformity of radio equipment;
(c) co-operate with the competent national authorities, at their request, on any action taken to eliminate the risks posed
Article 19 General principles of the CE marking
1.The CE marking shall be subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008.
2.On account of the nature of radio equipment, the height of the CE marking affixed to radio equipment may be lower than 5 mm, provided
that it remains visible and legible.
Article 20 Rules and conditions for affixing the CE marking and the identification number of the notified body
1.The CE marking shall be affixed visibly, legibly and indelibly to the radio equipment or to its data plate, unless that is not possible or not
warranted on account of the nature of radio equipment. The CE marking shall also be affixed visibly and legibly to the packaging.
2.The CE marking shall be affixed before the radio equipment is placed on the market.
3.Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall
take appropriate action in the event of improper use of that marking.
MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566, USA
Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com
Notified Body EU-Type Examination Certificate
for Radio Equipment Directive (RED) 2014/53/EU
DTNC180 / 6 Aug 2019 / Rev A
DTNC180Page 6 of 6DTNC180
Doc - Cert v2.1
UK 1
REU-DECLARATION OF CONFORMITY
Manufacturer: Continental Advanced Antenna GmbH
Address: Römerring 1
31137 Hildesheim
Product: Amplifier
Type /
Article number:
AM/FM1/DAB2 RdW AGC 760 035 577 T
DAB AGC 9Y0 035 225 J
FM AGC 9Y0 035 225 C
AM/FM/FZV AGC 9Y0 035 225 A
AM/FM/DAB/FZV AGC 9Y0 035 225 N
DAB RdW 760 035 577 S
FM2 RdW 760 035 577 A
AM/FM1 RdW 760 035 577
FM2 RDW (no AGC) 6F9 035 225
FM2 RDW (no AGC) 6F0 035 225
FM2 RDW (AGC) 57A 035 577 A
AM/FM RDW 57A 035 577
Continental Advanced Antenna GmbH hereby confirm under its sole responsibility that the designated
product, when used as intended, complies with the following directives on the harmonisation of the
laws.
Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws.
Health and safety pursuant to Art. 3(1) a): Applied standards
EN 62368-1: 2014 (Second Edition)
IEC 62368-1: 2014 (Second Edition)
Electromagnetic compatibility pursuant to Art. 3(1) b): Applied standards
EN 301 489-1 V1.9.2 (2011-09)
UK 2
Efficient use of spectrum pursuant to Art. 3(2): Applied standards
ES 202 056 V1.1.1 (adopted)
Development, production, quality assurance and marketing are based on the standard ISO/TS 16949.
The conformity assessment procedure referred to in Article 17 and detailed in Annex III of Directive
2014/53/EU has been followed with the involvement of the following Notified Body:
CSA Group Bayern GmbH
Ohmstrasse 1-4
94342 Strasskirchen, Germany,
Notified body number: 1948
The notified body has issued the EU type-examination certificate:
ZS 17 06 54004 003
Place, Date: Hildesheim, 31.07.2020
Binding signature:
Michael Heise
Managing Director Dr. Markus Hoffmeister
Managing Director
