11. Manufacturers who consider or have reason to believe that radio equipment which they have placed on the market is not in conformity
with this Directive shall immediately take the corrective measures necessary to bring that radio equipment into conformity, to withdraw it or
recall it, if appropriate. Furthermore, where the radio equipment presents a risk, manufacturers shall immediately inform the competent
national authorities of the Member States in which they made the radio equipment available on the market to that effect, giving details, in
particular, of the noncompliance, of any corrective measures taken and of the results thereof.
12. Manufacturers shall, further to a reasoned request from a competent national authority, provide it with all the information and
documentation in paper or electronic form necessary to demonstrate the conformity of the radio equipment with this Directive, in a
language which can be easily understood by that authority. They shall cooperate with that authority, at its request, on any action taken to
eliminate the risks posed by radio equipment which they have placed on the market.
Ref RED 2014/53/EU Article 11 - Authorised representatives
1. A manufacturer may, by a written mandate, appoint an authorised representative.
The obligations laid down in Article 10(1) and the obligation to draw up technical documentation laid down in Article 10(3) shall not form
part of the authorised representative's mandate.
2. An authorised representative shall perform the tasks specified in the mandate received from the manufacturer. The mandate shall allow
the authorised representative to do at least the following:
(a) keep the EU declaration of conformity and the technical documentation at the disposal of national market surveillance authorities for 10
years after the radio equipment has been placed on the market;
(b) further to a reasoned request from a competent national authority, provide that authority with all the information and documentation
necessary to demonstrate the conformity of radio equipment;
(c) co-operate with the competent national authorities, at their request, on any action taken to eliminate the risks posed
Article 19 General principles of the CE marking
1.The CE marking shall be subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008.
2.On account of the nature of radio equipment, the height of the CE marking affixed to radio equipment may be lower than 5 mm, provided
that it remains visible and legible.
Article 20 Rules and conditions for affixing the CE marking and the identification number of the notified body
1.The CE marking shall be affixed visibly, legibly and indelibly to the radio equipment or to its data plate, unless that is not possible or not
warranted on account of the nature of radio equipment. The CE marking shall also be affixed visibly and legibly to the packaging.
2.The CE marking shall be affixed before the radio equipment is placed on the market.
3.Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and shall
take appropriate action in the event of improper use of that marking.
MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566, USA
Tel: +1 (925) 462-0304, Fax: +1 (925) 462-0306, Web: www.micomlabs.com
Notified Body EU-Type Examination Certificate
for Radio Equipment Directive (RED) 2014/53/EU
DTNC180 / 6 Aug 2019 / Rev A
DTNC180Page 6 of 6DTNC180
Doc - Cert v2.1
