2020 OPEL INSIGNIA BREAK Owner's Manual

Page 233 of 315

OPEL INSIGNIA BREAK 2020  Owners Manual Vehicle care231Vehicle checks
Performing work9 Warning
Only perform engine compartment
checks when the ignition is off.
The cooling fan may start
operating even if the ignition is off.
9 Danger
The ig

Page 234 of 315

OPEL INSIGNIA BREAK 2020  Owners Manual 232Vehicle careCaution
Do not press the bonnet into the
latch to avoid dents.
Active bonnet  3 72.
Engine oil
Check the engine oil level manually
on a regular basis to prevent damage
to the engine. En

Page 235 of 315

OPEL INSIGNIA BREAK 2020  Owners Manual Vehicle care233When the engine oil level has
dropped to the  MIN mark, top up
engine oil.
The engine oil level must not exceed
the  MAX  mark on the dipstick.
We recommend the use of the same
grade of

Page 236 of 315

OPEL INSIGNIA BREAK 2020  Owners Manual 234Vehicle careDepending on the engine, the
position of the coolant container may be different.9 Warning
Allow the engine to cool before
opening the cap. Carefully open
the cap, relieving the pressure

Page 237 of 315

OPEL INSIGNIA BREAK 2020  Owners Manual Vehicle care235
The brake fluid level must be betweenthe  MIN  and  MAX marks.
If fluid level is below  MIN seek the
assistance of a workshop.
Brake and clutch fluid  3 279.
Vehicle battery
The vehicl

Page 238 of 315

OPEL INSIGNIA BREAK 2020  Owners Manual 236Vehicle careReplacing the vehicle batteryNote
Any deviation from the instructions
given in this section may lead to
temporary deactivation or
disturbance of the stop-start system.
When the vehicle

Page 239 of 315

OPEL INSIGNIA BREAK 2020  Owners Manual Vehicle care237Idle boost
If charging of the vehicle battery is
required due to battery condition, the
power output of the generator must
be increased. This will be achieved by
an idle boost which may

Page 240 of 315

OPEL INSIGNIA BREAK 2020  Owners Manual 238Vehicle careRear windowGrand Sport
Lift the wiper arm until it stays in the
raised position, press button to
disengage the wiper blade and
remove.
Attach the wiper blade slightly angled
to the wipe