2020 NISSAN VERSA NOTE check engine

[x] Cancel search: check engine

Page 334 of 492

NISSAN VERSA NOTE 2020  Owner´s Manual TURNING THE RAB SYSTEM
ON/OFF
Perform the following steps to turn the RAB
system on or off.
For vehicles with the vehicle information
display (if so equipped):1. Press the
button until “Settings”

Page 336 of 492

NISSAN VERSA NOTE 2020  Owner´s Manual SYSTEM MALFUNCTION
If the RAB system malfunctions, it will be
turned off automatically, and the RAB sys-
tem warning light will illuminate, and the
“System fault” warning message will ap-
pear in

Page 345 of 492

NISSAN VERSA NOTE 2020  Owner´s Manual NOTE:
When the inside of the windshield on the
camera area is misted or frozen, it will
take a period of time to remove it af ter
the A/C turns on. If dirt appears on this
area, it is recommended that

Page 358 of 492

NISSAN VERSA NOTE 2020  Owner´s Manual SYSTEM TEMPORARILY
UNAVAILABLE
Condition A
When the radar sensor picks up interfer-
ence from another radar source, making it
impossible to detect a vehicle ahead, the
I-FCW system is automatically tu

Page 363 of 492

NISSAN VERSA NOTE 2020  Owner´s Manual ∙ The I-DA system may not operateproperly and may not provide an alert
in the following conditions:
– Poor road conditions such as an uneven road surface or pot holes.
– Strong side wind.
– If

Page 367 of 492

NISSAN VERSA NOTE 2020  Owner´s Manual 3. To help prevent the vehicle from rollinginto traffic when parked on an incline, it
is a good practice to turn the wheels as
illustrated.
∙ HEADED DOWNHILL WITH CURB
1:
Turn the wheels into the c

Page 369 of 492

NISSAN VERSA NOTE 2020  Owner´s Manual – When installing a spare tire, makesure that it is the proper size and
type as specified on the Tire and
Loading Information label. For ad-
ditional information, refer to “Tire
and Loading Inform

Page 379 of 492

NISSAN VERSA NOTE 2020  Owner´s Manual FREEING A FROZEN DOOR LOCK
To prevent a door lock from freezing, apply
de-icer through the key hole. If the lock
becomes frozen, heat the key before in-
serting it into the key hole or use the re-
mot