2020 MERCEDES-BENZ SL CLASS windshield wipers

When
theengine isrunn ing,thevehicle issta-
tionary andinbright ambient light:ifyou turn
the light switch tothe 0060 position, theday-
time runninglamps andparking lampsswitch
on.
If the engine isrunn ingand youturn thelight
switch to0058, themanual settings take prec-
edence overthedaytime runninglamps.
USA only:
The daytime runninglamps improve thevisibil-
ity ofyour vehicle duringtheday. Todo this,
the daytime runninglamps functionmust be
switched onusing theon-board computer
(Y page 202).
If the engine isrunn ingand youturn thelight
switch to0060 or0058, themanual settings
take preceden ceover thedaytime running
lamps.
Low-beam headlamps G
WARNIN
G
When thelight switch isset to0058, the
low-beam headlamps maynotbeswitched
on automatically ifthere isfog, snow or
other causes ofpoor visibility duetothe
weather conditionssuch asspray. Thereisa
risk ofan accident .
In such situation s,turn thelight switch to
0058.
Even ifthe light sensor doesnotdetect thatit
is dark, theparking lampsandlow-beam head-
lamps switch onwhen theignition isswitched
on and thelight switch isset tothe 0058 posi-
tion. Thisisaparticularly usefulfunctioninthe
event ofrain andfog.
X To
switch onthe low-beam headlamps:
turn theSmart Keytoposition 0048inthe igni-
tion lock orstart theengine.
X Turn thelight switch to0058.
The green 0058indicator lampinthe instru-
ment cluster lightsup.
Park inglamp s
! If
the batter ycharge isvery low,thepark-
ing lamps orstandin glamps areautomati-
cally switched offtoenable thenext engine
start .Always parkyourvehicle safelyandin
a well litarea, inaccordan cewith therele-
vant legal stipulations. Avoidusingthe0060
parking lampsoveraperiod ofseveral hours.
Ifpossible, switchonthe right- hand
0064 orleft- hand 0063 standin glamps.
X To switch on:turn thelight switch to0060.
The green 0060indicator lampinthe instru-
ment cluster lightsup.
Stand inglamp s
Switc hingonthe standin glamps ensures the
corr esponding sideofthe vehicle isillumina-
ted.
X To switch onthe stand inglamp s:the
Smart Keyisnot inthe ignition lockoritis in
position 0092inthe ignition lock.
X Turn thelight switch to0063 (left-hand side
of the vehicle) or0064 (right- handsideof
the vehicle). Combination
switch 0043
High-beam headlamps
0044 Turn signal, right
0087 High-beam flasher
0085 Turn signal, left
X To indicate briefly:pressthecombin ation
switch brieflytothe pressure pointinthe
direct ionofarrow 0044or0085.
The corresponding turnsignal flashes three
times.
X To indicate: pressthecombin ationswitch
beyond thepressure pointinthe direct ionof
arrow 0044or0085.
X To
switch onthe high-beam headlamps:
turn thelight switch to0058 or0058.
X Press thecombin ationswitch beyond the
pressure pointinthe direct ionofarrow 0043.
In the 0058 position, thehigh-beam head-
lamps areonly switched onwhen itis dark
and theengine isrunn ing. 110
Exterior
lightingLightsandwindshield wipers

The
blue 0057 indicator lampinthe instr u-
ment cluster lightsupwhen thehigh-beam
headlamps areswitched on.
X To
switch offthe high-beam headlamps:
move thecombinat ionswitch backtoits
normal position.
The blue 0057 indicator lampinthe instr u-
ment cluster goesout. Haza
rdwarning lamps X
To
switch onthe haza rdwarning lamps:
press button 0043.
All turn signals flash.Ifyou now switch ona
turn signal usingthecombinat ionswitch,
only theturn signal lamponthe correspon d-
ing side ofthe vehicle willflash.
X To
switch offthe haza rdwarning lamps:
press button 0043.
The hazard warning lampsautomatically
switch onif:
R an air bag isdeployed or
R the vehicle decelerates rapidlyfromaspeed
of above 45mph (70km/ h)and comes toa
standst ill
The hazard warning lampsswitch offautomati-
cally ifthe vehicle reaches aspeed ofabove
6 mph (10km/ h)again afterafull brake appli-
cation.
i The
hazard warning lampsstilloperate if
the ignition isswitched off. Cornering
lightfunction
The corn ering lightfunct ionimproves theillu-
mination ofthe road overawide angle inthe
direction youareturnin g,enabling bettervisi-
bility intight bends, forexample. Thecorn er- ing
light funct ioncan only beactivated when
the low-beam headlamps areswitched on.
Active:
R ifyou aredriving atspeeds below25mph
(40 km/ h)and switch onthe turn signal or
turn thesteerin gwheel
R ifyou aredriving atspeeds between 25mph
(40 km/ h)and 45mph (70km/ h)and turn
the steerin gwheel
The corn ering lampmayremain litfor ashort
time, butisautomatically switchedoffafter no
more thanthree minutes.
Cornering lightfunction withtraffic circle
function:
The corn ering lightfunct ionisactivated on
both sides before enteringatraff iccircle
through anevaluation ofthe current GPSposi-
tion ofthe vehicle. Itremains activeuntilafter
the vehicle hasleftthetraff iccircle. Inthis
way, pedestrians crossingthe road, forexam-
ple, areilluminated byyour vehicle ingood
time. Active
lightfunction
The active lightfunct ionisasystem that
moves theheadlamps accordingtothe steer-
ing movemen tsof the front wheels. Inthis
way, relevant areasremain illuminated while
driving. Thisallows youtorecogn izepedes-
trians, cyclists andanimals sooner.
Active: whenthelights areswitched on.
Vehicles withLane Keeping Assist:the active
light funct ionevaluates thecourse ofthe lane
in which youaredriving andpre-empt ively
cont rolstheactive lightfunct ion. Adapt
iveHighbeam Assist
General notes You
canusethis funct iontoset the headlamps
to change between lowbeam andhigh beam
automatically. Thesystem recognizesvehicles
with their lights on,either approaching from
the opposite direction ortraveling infront of
your vehicle, andconsequent lyswitches the
headlamps fromhighbeam tolow beam.
The system automatically adaptsthelow-beam
headlamp rangedepending onthe distance to
the other vehicle. Oncethesystem nolonger Exterior
lighting
111Lightsandwindshield wipers Z

detec
tsany other vehicles, itreact ivates the
high-beam headlamps.
The system' soptic alsensor islocated behind
the windshield neartheoverhead control
panel.
Impor tantsafet ynotes G
WARN
ING
Adaptiv eHighbeam Assistdoesnotrecog-
niz eroad users:
R who have nolights, e.g.pedestr ians
R who have poorlightin g,e.g. cyclist s
R whose lightingis block ed,e.g. byabarrier
On very rareoccasions, AdaptiveHighbeam
Assist mayfailtorecogn izeother roadusers
that have lights, ormay recogn izethem too
late. Inthis, orinsimilar situation s,the auto-
matic high-beam headlamps willnotbe
deactiv atedorwill beactiv ated regardless.
There isarisk ofan acciden t.
Always carefully observethetrafficcon di-
tion sand switch offthe high-beam head-
lamps ingood time.
Adaptiv eHighbeam Assistcannottake into
accoun troad, weather ortraf ficcon dition s.
Adaptiv eHighbeam Assistisonly anaid. You
are respon sibleforadjustin gthe vehicle's
lightin gto the prevailing light,visibility and
traf ficcon dition s.
In partic ular,thedetec tionofobstac lescan be
rest rictedifther eis:
R poor visibility, e.g.due tofog, heavy rainor
snow
R dirt onthe sensor sor the sensor sare
obscured
Switching AdaptiveHighbeam Assist
on/off X
To switch on:turn thelight switch to0058.
X Press thecombin ationswitch beyond the
pressure pointinthe direct ionofarrow 0043.
The 00CE indicat orlamp inthe multifun ction
display lightsupwhen itis dark andthelight
sensor activates thelow-beam headlamps.
If you aredriving atspeeds aboveapprox-
imately 16mph (25km/ h): The
headlamp rangeisset automatic ally
dependin gon the distanc ebetween the
vehicle andother roadusers.
If you aredriving atspeeds aboveapprox-
imately 19mph (30km/ h)and noother
road users havebeen detec ted:
The high-beam headlamps areswitch edon
automatic ally.The0057 indicat orlamp in
the instrument clusteralsolights up.
If you aredriving atspeeds belowapprox-
imately 16mph (25km/ h)or other road
users havebeen detec tedorthe roads are
adequately lit:
The high-beam headlamps areswitch edoff
automatic ally.The0057 indicat orlamp in
the instrument clustergoesout.The00CE
indicat orlamp inthe multifun ction display
remains lit.
X To switch off:move thecombin ation
switch backtoits norm alposition ormove
the light switch toanot herposition .
The 00CE indicat orlamp inthe multifun ction
display goesout. Interior
lighting Overview
ofinterior lighting Overhead
control panel
0043 003D Switchestheleft- hand reading lamp
on/ off
0044 004A Switchestheinterior lightin gon
0087 0033 Switchestheinterior lightin g/auto-
matic interior lightin gcon trol off
0085 003D Switchestheright -handreading lamp
on/ off
0083 Switc hestheautomatic interior lightin g
con trol on 112
Interior
lightingLightsandwindshield wipers

X
Push thenew wiper bladeinthe direction of
arrow 0043ontothe wiper armuntil lug0044
engages.
X Push thewiper bladeoutofthe removal
position inthe direction ofarrow 0087beyond
the point ofresistan ce.
The wiper bladedisengages withanaudible
click andisfreely movable again. X
Make surethatthewiper bladeisseated
correc tly.
X Fold thewiper armback ontothe wind-
shield. Problems
withthewindshield wipers Problem
Possible
<0046004400580056004800560012004600520051005600480054005800480051
004600480056> and0050 0050
Solutions The
windshield wipers
are jammed. Leaves
orsnow, forexample, maybeobstruct ingthe windshield
wiper movemen t.The wiper motor hasbeen deactivated.
X For safety reasons, youshould remove theSmart Keyfrom the
ignition lock.
or X Switc hoff the engine usingtheStart /Stopbutton andopen the
driver's door.
X Remove thecause ofthe obstruct ion.
X Switc hthe windshield wipersbackon. The
windshield wipers
fail completely. The
windshield wiperdriveismalfunct ioning.
X Select another wiperspeed onthe combinat ionswitch.
X Have thewindshield wiperscheckedataqualified specialist
workshop. Windshield
wipers
115Lightsandwindshield wipers Z

Setting
thecompass North
America zonemap South
America zonemap
X Set your location usingthezone maps.
X Push around peninto opening 0087
(Y page 265)forapproximately threesec-
onds.
The zone current lyselected appearsincom-
pass display 0044(Ypage 265).
X To selec tthe zone: pusharound peninto
opening 0087(Ypage 265)untilthedesired
zone isselected.
If, after afew seconds, thedisplay incom-
pass display 0044(Ypage 265)changes direc-
tion, thezone hasbeen selected. Calibrating
thecompass X
Make surethatthere issufficient spacefor
you todrive inacircle without impeding
traffic.
In order tocalibrate thecompass correctly,do
the following:
R calibrate thecompass inthe open andnotin
the vicinity ofsteel struct uresorhigh-volt-
age transm issionlines.
R switch offelectrical consumers suchasthe
climate control,windshield wipersorrear
window defroster.
R close alldoors andthetrunk lid.
X Switch onthe ignition.
X Push around peninto opening 0087
(Y page 265)forapproximately sixseconds,
until symbol C C
is shown incompass dis-
play 0044(Ypage 265).
X Drive yourvehicle inafull circle atapprox-
imately 3mph (5km/h) to6mph
(10 km/h).
When thecalibration hassuccessfully been
completed, thecurrent direction isshown in
compass display0044(Ypage 265). Floo
rmats G
WARNING
Object sin the driver's footwell mayrestrict
the clearance aroundthepedals orblock a
depressed pedal.Thisjeopardizes theoper-
ating androad safety ofthe vehicle. Thereis
a risk ofan accident.
Stow allobject ssecurely inthe vehicle so
that they donot getinto thedriver's foot-
well. When usingfloormats orcarpets, make
sure thatthey areproperly securedsothat
they donot slip orobstruct thepedals. Do
not place several floormats orcarpets on
top ofone another. 266
FeaturesStowage
andfeatu res