2020 MASERATI GRANTURISMO CONVERTIBLE warning

[x] Cancel search: warning

Page 195 of 296

MASERATI GRANTURISMO CONVERTIBLE 2020  Owners Manual WARNING!
•Improperly inflated tires can be
dangerous.
•Under-inflation increases tire flexing
and can result in tire overheating.
•Over-inflation reduces a tire's ability
to cushion shock. O

Page 196 of 296

MASERATI GRANTURISMO CONVERTIBLE 2020  Owners Manual WARNING!
The wet performance (aquaplaning
resistance) will decrease
proportionally to the thickness of the
tread.
Tires Durability
The service life of a tire depends on
various factors including, but

Page 197 of 296

MASERATI GRANTURISMO CONVERTIBLE 2020  Owners Manual •Never exceed the maximum speed
rating of the tires. Risk of accident
and serious personal injury due to
excessive speed.
•Failure to equip your vehicle with
tires having adequate speed
capability

Page 199 of 296

MASERATI GRANTURISMO CONVERTIBLE 2020  Owners Manual that prevent the TPMS from
functioning properly. Always check the
TPMS malfunction telltale after
replacing one or more tires or wheels
on your vehicle to ensure that the
replacement or alternate tire

Page 200 of 296

MASERATI GRANTURISMO CONVERTIBLE 2020  Owners Manual (Continued)
style. Aftermarket wheels can cause
sensor damage. Do not use
aftermarket tire sealants or balance
beads, as damage to the sensors may
result.
• The system can temporarily
experience rad

Page 201 of 296

MASERATI GRANTURISMO CONVERTIBLE 2020  Owners Manual or more tires falls below the
low-pressure alarm threshold (Soft
Warning). The tire with its low
pressure value will be highlighted in
amber color for 30 seconds.
• The tire with its low pressure va

Page 202 of 296

MASERATI GRANTURISMO CONVERTIBLE 2020  Owners Manual • after inverting the wheels;
• if you are not sure whether at least
one of the operations above was
performed.
If you simply corrected the tire
inflation pressure, you do not need to
recalibrate

Page 203 of 296

MASERATI GRANTURISMO CONVERTIBLE 2020  Owners Manual “--,--” will be displayed in the place of
the values.
NOTE:
•The system will not perform
calibration if the pressure is below 2
bar (29 psi).
•To allow the system to acquire the
sensors’s da