2020 LINCOLN CORSAIR service

[x] Cancel search: service

Page 139 of 591

LINCOLN CORSAIR 2020  Owners Manual Hill Start Assist
Action
Message
Hill start assist is not available. Contact an authorized dealer.  See Hill Start Assist (page 217).
Hill Start Assist Not Available
Keys and Intelligent Access Action

Page 140 of 591

LINCOLN CORSAIR 2020  Owners Manual Action
Message
Displayed during spare key programming when not enough keys have been programmed.
Not Enough Keys Learned
Displays when the key battery is low. Change the battery as soon as possible.
K

Page 141 of 591

LINCOLN CORSAIR 2020  Owners Manual Maintenance
Action
Message
Stop your vehicle as soon as safely possible and turn off the engine. Check the oil level. If the
warning stays on or continues to come on with your engine running, conta\
c

Page 143 of 591

LINCOLN CORSAIR 2020  Owners Manual Park Aid
Action
Message
The system has detected a fault that requires service. Contact an authorized dealer.
Check Front Park Aid
The system has detected a fault that requires service. Contact an auth

Page 144 of 591

LINCOLN CORSAIR 2020  Owners Manual Park Brake
Action
Message
The parking brake is set, the engine is running and you drive your vehicle more than 3 mph
(5 km/h). If the warning stays on after the parking brake is released, contact an a

Page 145 of 591

LINCOLN CORSAIR 2020  Owners Manual Action
Message
The electric park brake system has detected a condition that requires service. Some functionalitymay still be available. Contact your authorized dealer.
Park Brake Limited Function Serv

Page 149 of 591

LINCOLN CORSAIR 2020  Owners Manual Action
Message
There is a fault with your trailer turn lamp. Check your lamp.
Trailer Left Turn Lamps Fault Check Lamps
There is a fault with your trailer turn lamp. Check your lamp.
Trailer Right Tur

Page 150 of 591

LINCOLN CORSAIR 2020  Owners Manual Action
Message
A reminder to shift into park. In addition, this message is typical afte\
r reconnecting or rechargingthe battery until you cycle the ignition to the on mode.  See Changing the 12V Batt