CADENZA FEATURES & FUNCTIONS GUIDE40*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
REMINDER: Do not attempt to adjust the seat while the vehicle is moving This could result in loss of control of the vehicle
Power Adjustable Driver’s Seat†17
Move/Press controls to adjust Seat, Seat forward/backward, Seat
Cushion tilt up/down, Seatback forward/backward, Lumbar up/down/
forward/backward or Seat Cushion Extension forward/backward
A
B
C
D
AABCD
SeatbackLumbarSeat Cushion ExtensionSeatSeat Cushion
(Buttons located on Driver's Door Panel)
B
C
Driver Position Memory System*
The integrated system stores into memory the position of the Driver’s Seat,
Outside Rearview Mirrors and the Steering Wheel
To store positions into memory, first place the Gear Shift into P (Park) while
the Engine Start /Stop button is in the ON position Then:
1 Adjust the Driver’s Seat, Outside Mirrors and the Steering Wheel
2 Press the SET button B on the control panel System will beep once
3 Press one of the memory buttons C within 5 seconds The system will
beep twice when memory has been stored
4 “Driver (1 or 2) set is memorized” will appear on the instrument cluster
LCD screen
REMINDER: Do not attempt to operate the driver position memory system while the vehicle is moving This could result in loss of control of the vehicle
SEATING
47ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Reverse Parking Collision-Avoidance Assist (PCA)*†6
Reverse Parking Collision-Avoidance Assist (PCA) is designed to detect certain
objects/pedestrians behind the vehicle and issues an audible warning and/or
apply emergency braking to reduce the possibility of a collision when the vehicle
is in reverse
Reverse PCA can be turned on in the Vehicle Settings* in the audio head unit
by selecting Driver Assistance, Parking Safety then one of the following:
Active Assist, Warning Only, Off
When a potential collision is detected, the system applies emergency braking for
about two seconds A warning message on the Instrument Cluster will display A
reminding the driver to press the brake immediately
REMINDERS:
•
The Reverse PCA system is operational when Active Assist is selected in the Vehicle Settings
•The Reverse PCA system will only operate when the:
– Vehicle speed is below 6 mph
– The trunk is closed
– The gear shift is in R (Reverse)
– Other system such as Rear View Monitor are operating under normal conditions
Brake Now!
The Parking Distance Warning-Reverse is not a substitute for proper and safe backing-up procedures. Always drive safely and use caution when backing up. The Parking Distance Warning-Reverse may not detect every object behind the vehicle
Parking Distance Warning-Reverse*†6
The Parking Distance Warning-Reverse is a supplemental system
that is designed to assist the driver by chiming if any object is
detected within the sensing area to the rear and side of the vehicle
when backing up When the ignition is ON, the system is activated
REMINDERS:
•If the vehicle is moving at speeds over 3 mph, the system may not activate correctly
•
When more than two objects are sensed at the same time, the closest one will be recognized first
A
OTHER KEY FEATURES
