Page 102 of 595

100
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Adaptive Cruise 
Control (ACC) 
with Low Speed 
Follow Indicator 
(Amber)
●Comes on for a few seconds when 
you set the power mode to ON, 
then goes off.
●Comes on if there is a problem 
with ACC with Low Speed Follow.
●Comes on while driving  - Have your 
vehicle checked by an  authorized Honda 
Clarity Plug-In Hybrid dealer.
●Comes on if anything covers the 
radar sensor cover and prevents 
the sensor from detecting a vehicle 
in front.
●May come on when driving in bad 
weather (rain, snow, fog, etc.)
●ACC with Low Speed Follow has 
been automatically canceled.
●The area around the radar sensor is 
blocked by dirt, mud, etc. Stop your 
vehicle in a safe place, and wipe it off 
with a soft cloth. Indicator may take some 
time to go off after the radar sensor is 
cleaned.
●Have your vehicle checked by an 
authorized Honda Clarity Plug-In Hybrid 
dealer if the indicator does not go off 
even after you clean the sensor cover.
Adaptive Cruise 
Control ( ACC) 
with Low Speed 
Follow Indicator 
(Green)●Comes on when you press the 
MAIN  button.
2Adaptive Cruise Control (ACC) with 
Low Speed Follow  P. 402—
20 CLARITY PHEV-31TRW6200.book  100 ページ  2019年9月24日 火曜日 午後12時9分 
     
        
        Page 104 of 595

102
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Collision 
Mitigation 
Braking 
System
TM 
(CMBSTM) 
Indicator
●Comes on when the CMBSTM 
system shuts itself off.●Stays on  - The area around the camera is 
blocked by dirt, mud, etc. Stop your 
vehicle in a safe place, and wipe it off 
with a soft cloth.
2 Front Sensor Camera  P. 396
●The area around the radar sensor is 
blocked by dirt, mud, etc. Stop your 
vehicle in a safe place, and wipe it off 
with a soft cloth. Indicator may take some 
time to go off after the radar sensor is 
cleaned.
●Have your vehicle checked by an 
authorized Honda Clarity Plug-In Hybrid 
dealer if the indicator does not go off 
even after you clean the sensor cover.
2Collision Mitigation Braking 
SystemTM (CMBSTM) P. 443
●Stays on  - The temperature inside the 
camera is too high . Use the climate 
control system to cool down the camera. 
The system acti vates when the 
temperature inside the camera cools 
down sufficiently.
2 Front Sensor Camera  P. 396
20 CLARITY PHEV-31TRW6200.book  102 ページ  2019年9月24日 火曜日 午後12時9分 
     
        
        Page 108 of 595

106
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
●Appears after the driver’s door is opened when the 
power mode is in ACCESSORY.●Press the POWER button twice with your foot off the 
brake pedal to change the power mode to VEHICLE 
OFF.
●Appears when the power  mode is in ACCESSORY.
—
●Appears when you close th e door with the power 
mode in ON without the smart entry remote inside 
the vehicle.●Disappears when you bring th e smart entry remote back 
inside the vehicle and close the door.
2 Smart Entry Remote Reminder  P. 160
●Appears when the smart entry remote battery 
becomes weak.●Replace the battery as soon as possible.
2Replacing the Button Battery  P. 514
●Appears if the smart entry remote’s battery is too 
weak to turn on the power system or the key is not 
within operating range to turn on the power system.
A beeper sounds six times.●Bring the back of the smart entry remote into contact 
with the POWER button.
2If the Smart Entry Remote Battery is Weak  P. 541
●Appears when you set the power mode to 
ACCESSORY or ON.
●Appears after you unlock and open the driver’s door.
2Turning on the Power  P. 378
●Appears when the POWER button is pressed while 
driving.
2 Emergency Power System Off  P. 542
Canadian models
20 CLARITY PHEV-31TRW6200.book  106 ページ  2019年9月24日 火曜日 午後12時9分 
     
        
        Page 122 of 595

120
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
●Appears when the LKAS is in operation, or the LKAS 
button is pressed, but there is a problem with a 
system related to the LKAS. The LKAS cancels 
automatically. The beeper  sounds simultaneously.●If the VSA®, ABS, or brake system indicator or another 
indicator comes on, take appropriate action.
2 Indicators  P. 86
●Appears when the temperature inside the camera is 
too high.●Use the climate control sy stem to cool down the 
camera.
●Goes off  - The camera has been cooled down. Pressing 
the LKAS button can resume the system.
2 Adaptive Cruise Control (ACC) with Low Speed 
Follow  P. 402
2 Lane Keeping Assist System (LKAS)  P. 419
2 Front Sensor Camera  P. 396
●Appears when the area around the camera is 
blocked by dirt, mud, etc. Stop your vehicle in a safe 
place, and wipe it off with a soft cloth.
●May appear when driving in bad weather (rain, 
snow, fog, etc.).
●Have your vehicle checked by an authorized Honda 
Clarity Plug-In Hybrid dealer  if the message does not 
disappear, even after you  clean the area around the 
camera.
2 Adaptive Cruise Control (ACC) with Low Speed 
Follow  P. 402
2 Lane Keeping Assist System (LKAS)  P. 419
2 Front Sensor Camera  P. 396
20 CLARITY PHEV-31TRW6200.book  120 ページ  2019年9月24日 火曜日 午後12時9分 
     
        
        Page 133 of 595

131
uuGauges and Driver Information Interface uDriver Information Interface
Continued
Instrument Panel
■Drive Cycle Score/Lifetime Points
Appear for a few seconds when you set  the power mode to VEHICLE OFF (LOCK). 
Each has three stages. Depending on your  driving style, the leaf icon(s) and the 
gauge increase or decrease to indicate that  you have reached a different stage of 
fuel economy.
■Resetting the Drive Cycle Score
1. Make sure the transmission is in 
(P. Turn the power mode to ON.
2. If ECON mode is on, press the  ECON button to turn it off.
3. Turn the power mode to VEHICLE OFF (LOCK).
4. Turn the power mode to ON again.
u Make sure to complete steps fro m 4 through 6 within 30 seconds.
5. Depress the brake pedal twice.
u The color of the ambient meter wi ll change from white to green.
u When the  Fuel Efficiency Backlight  setting on the audio/information display 
is off, the color stays white.
6. Press the  ECON button twice.
u The color of the ambient mete r will turn to monochrome.
7. Turn the power mode to VEHICLE OFF (LOCK).
Advancing to 
2nd Stage Advancing to 
3rd Stage
Receding to 
2nd Stage Receding to 
3rd Stage
Lifetime Points Drive Cycle Score
20 CLARITY PHEV-31TRW6200.book  131 ページ  2019年9月24日 火曜日 午後12時9分 
     
        
        Page 137 of 595

135
Controls
This chapter explains how to operate the various controls necessary for driving.
Clock.................................................. 136
Locking and Unlocking the Doors Key .................................................. 137
Low Smart Entry Remote Signal Strength .. 138Locking/Unlocking the Doors from the Outside .......................................... 139
Locking/Unlocking the Doors from the  Inside ............................................. 146
Childproof Door Locks ..................... 148
Auto Door Locking/Unlocking .......... 149
Opening and Closing the Trunk ....... 150
Security System ................................ 153
Immobilizer System .......................... 153 Security System Alarm...................... 153
Opening and Closing the Windows ... 156
Operating the Switches Around the 
Steering Wheel POWER Button................................. 158
Turn Signals ..................................... 161
Light Switches.................................. 162
Daytime Running Lights ................... 165
Wipers and Washers ........................ 166
Brightness Control ........................... 168
Rear Defogger/Heated Door Mirror Button........................................ 169
Driving Position Memory System*.... 170 Adjusting the Steering Wheel .......... 172
Adjusting the Mirrors ....................... 173
Interior Rearview Mirror ................... 173
Power Door Mirrors ......................... 174
Adjusting the Seats .......................... 175
Front Seats ...................................... 175
Interior Lights/Interior Convenience  Items ................................................ 183
Interior Lights .................................. 183
Interior Convenience Items .............. 185
Climate Control System ................... 193
Using Automatic Climate Control .... 193
Automatic Climate Control Sensors ... 201
* Not available on all models
20 CLARITY PHEV-31TRW6200.book  135 ページ  2019年9月24日 火曜日 午後12時9分 
     
        
        Page 138 of 595

136
Controls
Clock
Adjusting the Clock
You can adjust the time manually in the audio/information screen, with the power 
mode in ON.
■Using the Settings menu on  the audio/information screen
1.Select  Settings .
2. Select  Clock.
3. Select  Clock Adjustment .
4. Select   or   to change hour.
5. Select   or   to change minute, then 
select  OK.
■Adjusting the Time
1Adjusting the Clock
You can customize the clock display to show the 12 
hour clock or 24 hour clock.
2 Customized Features  P. 306
You can turn the clock display in the audio/
information screen on and off. 2 Customized Features  P. 306
You cannot adjust the time while the vehicle is 
moving.
You can also adjust the clock by touching the clock 
displayed on the upper right corner of the display.
1. Touch the clock on the display.
2. Select Clock Adjustment .
3. Select   or   to change hour.
4. Select   or   to change minute, then select  OK.
The clock is automatica lly updated through the 
navigation system, so the ti me does not need to be 
adjusted.
34
34
Models with navigation system
Models without navigation system
34
34
20 CLARITY PHEV-31TRW6200.book  136 ページ  2019年9月24日 火曜日 午後12時9分 
     
        
        Page 139 of 595

137Continued
Controls
Locking and Unlocking the Doors
Key
This vehicle comes with the following key:Use the key to turn on and off the power 
system, and to lock and unlock the doors and 
to open the trunk. You can also use the 
remote transmitter to lock and unlock the 
doors and trunk, and open the charge lid.
The built-in key can be used to lock/unlock the 
doors when the smart entry remote battery 
becomes weak and the power door lock/
unlock operation is disabled.
To remove the built-in key, slide the release 
knob and then pull out the key. To reinstall 
the built-in key, push th e built-in key into the 
smart entry remote until it clicks.1 Key
All the keys have an immobilizer system. The 
immobilizer system helps to  protect against vehicle 
theft. 2 Immobilizer System  P. 153
Follow the advice below to  prevent damage to the 
keys:
•Do not leave the keys in  direct sunlight, or in 
locations with high temperature or high humidity.
•Do not drop the keys or set heavy objects on them.•Keep the keys away from liquids, dust and sand.
•Do not take the keys apart except for replacing the 
battery.
If the circuits in the keys are damaged, the power 
system may not activate, and the remote transmitter 
may not work.
If the keys do not work properly, have them 
inspected by an authorized Honda Clarity Plug-In 
Hybrid dealer.■Built-in Key
Built-in Key
Release Knob
20 CLARITY PHEV-31TRW6200.book  137 ページ  2019年9月24日 火曜日 午後12時9分