Page 212 of 270

8. Tire Replacement
The tires fitted to your vehicle as original equipment were tested and
approved by the vehicle manufacturer and the tire manufacturer and take
into account all aspects of the vehicle’s operation. Changes in the tire size,
type or construction should not be made without seeking advice from the
vehicle or tire manufacturer or an authorized Pirelli dealer since unap-
proved tires on your vehicle could adversely affect steering, handling,
braking and traction. The tire information (tire size, load index and speed
symbol) as found on the vehicle placard or in the owner ’s manual should
always be followed when replacing tires.
It is strongly recommended that Pirelli tires be mounted in sets of four
with the same tread type. Pirelli tires should not be mixed with other tire
brands. It is necessary to follow this procedure because different tire
constructions have different handling characteristics. Tires on the same
axle must be the same manufacturer, brand, tire size, load index, speed
rating and Pirelli part number.
When changing only two tires on a vehicle which is homogeneously
fitted (four tires of the same tire size), fit the new tires on the rear axle.
This applies to all vehicles regardless of their drive axle. (Front or Rear
Drive).
On all wheel drive or four wheel drive vehicles the tires must always be
replaced in sets of four.
When replacing tires on light truck vehicles, you should always follow
the vehicle manufacturer ’s recommendations. Passenger and light truck
tires are not interchangeable, due to differences in their pressures and
load carrying capacity.
P-Metric and Euro-metric Interchangeability: Euro-metric (Example: 225/
45R17) tires have a load index which is equal to or greater than that of the
same size P-metric (Example: P225/45R17) tire. Therefore, they have the
same or higher load carrying capacity at the maximum rated inflation
pressure. Always check with your tire dealer or Pirelli Tire Consumer
Affairs to be sure of the exact interchangeability to maintain proper
vehicle dynamics.
Please be aware that it is important that, before fitting the suggested tires,
the fitment is allowed by the technical specifications of the vehicle, the
vehicle manufacturer and the relevant homologations. Pirelli Tire does
not express any view as to the compatibility of the wheel/tire combina-
tion with the technical specifications for the chassis and vehicle.
PIRELLI TIRES
211
Page 219 of 270

WHAT IS NOT COVERED?
This Limited Warranty does not cover the following categories of claims:
Rapid Treadwear: Original equipment tires are not guaranteed to last a
specified number of miles.
Damage from road hazards (not limited to cuts, snags, bruises, impact
breaks, bulges, punctures, stone drills, chips, and scales), fire, theft, or
collision.
Conditions arising from improper tire/vehicle maintenance or use, not
limited to:
•Irregular or excessive treadwear due to: Incorrect inflation; overload-
ing; vehicle misalignment; failure to rotate tires; and poor or defective
mechanical condition of brakes, shocks, and wheels; or other factors
attributable to the vehicle or wheel.
• Any tire which has been run with low air pressure or while flat.
• Damage due to abuse; vandalism; tire alteration; tire spinning; racing;
or other competitive activities.
• Damage, corrosion, or deterioration from using oil-based chemicals,
water-based sealers, balancing substances, or flammable gases.
• Damage from improper use of tire chains.
Tires with the DOT identification number removed or rendered illegible.
Improper mounting, balancing or repair, not limited to:
• Improper tire mounting, or tire/wheel assembly imbalance.
• Damage from incorrect mounting or dismounting of the tire, incorrect
wheel size, water or other material trapped inside the tire during
mounting, or failure to keep the tires balanced.
• Damage resulting from improper repair materials or procedures.
TOYO TIRES – LIMITED WARRANTY
218
Page 223 of 270

TIRE SAFETY AND MAINTENANCE INFORMATION
IMPORTANT SAFETY INFORMATION
This manual is not intended to provide proper training or service
procedures for tire mounting, dismounting, balancing, rotation, or repair.
Please leave these tasks to qualified tire service professionals.
•Toyo brand tires are designed and built with great care. Any tire, no matter
how well constructed, can fail as a result of punctures, impact damage,
underinflation/overloading or other conditions resulting from use. Tire
failures may create a risk of property damage or personal injury. To obtain
the highest possible performance, tires must be maintained properly.
•Remember, you are ultimately responsible for the tires installed on your
vehicle.
Inflation pressure can decrease by 1 psi for every 10°F temperature drop
Important factors in tire care are:
• Proper inflation pressure
• Proper vehicle loading
• Proper vehicle maintenance
• Regular inspection
• Good driving habits
Refer to your vehicle Owner ’s Manual for additional tire safety and
service advice.
TOYO TIRES – LIMITED WARRANTY
222
8 " 3 / * / (
Page 224 of 270
TIRE PRESSURE BASICS
The combined effect of losing 1 psi per month over several months along
with a 1 psi decrease for every 10°F temperature drop could add up to a
severe “run low” condition; consequently, it is important to check your
tires’ inflation pressure at least once per month. Inflation pressure enables
a tire to support its load; therefore, proper inflation is critical.
HOW TO DETERMINE PROPER TIRE INFLATION PRESSURE
It is impossible to determine whether tires are properly inflated just by
looking at them.
TOYO TIRES – LIMITED WARRANTY
223
Page 225 of 270
It is important to check your tires using an accurate tire pressure gauge,
which can be purchased at your tire dealer or auto supply store.
Under inflation can overload tires. Check the inflation pressure every
month, including for the spare tire, to make sure it’s up to specification.
Check it again before long trips or when carrying extra weight.
Look for the manufacturer ’s recommended inflation pressure listed on
the Tire Information Placard usually located on your vehicle’s door edge,
door post, glove box, or inside the trunk lid.
TOYO TIRES – LIMITED WARRANTY224
Page 226 of 270
It is important to check your tires using an accurate tire pressure gauge,
which can be purchased at your tire dealer or auto supply store.
Underinflation can overload tires. Check the inflation pressure every
month, including for the spare tire, to make sure it’s up to specification.
Check it again before long trips or when carrying extra weight.
Look for the manufacturer ’s recommended inflation pressure listed on
the Tire Information Placard usually located on your vehicle’s door edge,
door post, glove box, or inside the trunk lid.
$ " 6 5 * 0 /
The inflation pressure shown on the sidewall of the tire is not the intended
inflation pressure for the vehicle! Always refer to the vehicle’s Tire
Information Placard.
TOYO TIRES – LIMITED WARRANTY
225
Page 227 of 270
WARNING!
Driving on tires with insufficient inflation pressure is dangerous
because it will cause your tires to overheat. This can cause sudden
tire failure, which may result in loss of vehicle control and lead to
serious personal injury or death.
TOYO TIRES – LIMITED WARRANTY226
Page 228 of 270
USING A TIRE PRESSURE GAUGE
For accuracy, check your inflation pressure with a tire pressure gauge
when tires are cold (for example, after being parked overnight). Driving
heats up tires and causes an inaccurate pressure reading.
To check inflation pressure with a tire pressure gauge:
1. Remove the tire valve cap.
2. Place the end of the tire pressure gauge over the valve.
3. Press the tire pressure gauge straight and firmly and take a reading.
4. If needed, inflate and recheck the pressure with the tire pressuregauge.
5. Replace the valve cap.
TOYO TIRES – LIMITED WARRANTY
227