2019 VOLKSWAGEN TRANSPORTER length

Check the condition of the wiper blades on a regu-lar basis. Rubbing wiper blades should be changed if damaged or cleaned if dirty
Damaged wiper blades should be replaced imme-diately. Wiper blades can be bought from a quali-fied workshop.
Cleaning wiper blades
Note for the front wipers: move the wiper arms to the service position before lifting them 116.
• When lifting the wiper arm hold it only by the wiper blade mounting.
• Clean the wiper blade carefully using a damp cloth
• Place the wiper arm back onto the windscreen.
Changing the wiper blades
• Move the wiper arms to the service position be-fore lifting 116.
• When lifting the wiper arm hold it only by the wiper blade mounting.
• Press and hold the release button 285 G) and simultaneously pull off the wiper blade in the direction of the arrow.
• Insert a new wiper blade with the same length and design onto the wiper arm. Push it on until it engages.
• Place the wiper arm back onto the windscreen.
Changing the wiper blade for the rear window
• When lifting the wiper arm hold it only by the wiper blade mounting.
• Lift and fold back the wiper arm.
Waxing and polishing the vehicle
r--f"n First read and observe the Introductory L-J,::,JJ Information and safety warnings & on page 380.
Waxing
waxing protects the paintwork. You will need to re-wax the vehicle with a good hard wax if water no longer clearly forms small drops and runs off the paintwork when it is clean.
Even if a wax solution is used regularly in the car wash, Volkswagen Commercial Vehicles recom-mends protecting the paint with a coat of hard wax at least twice a year.
384 I Cleaning and maintenance
• Release the wiper blade in the direction of the arrow 286 G).
• Pull off the wiper blade in the direction of the ar-row®.
• Insert a new wiper blade with the same length and design on to the wiper arm against the direc-tion of the arrow. Push it on until it engages®.
• Push the release against the direction of the ar-row G) in order to lock the wiper blade.
• Place the wiper arm back onto the rear window.
A WARNING
Worn or dirty wiper blades reduce visibility and Increase the risk of accidents and severe Injuries.
• Therefore, always change wiper blades If they are damaged and worn and or longer clean the windscreen properly.
CD
• Damaged or dirty wipers could scratch the windscreen.
• Detergents containing solvents, hard sponges and other sharp objects can damage the graphite coating.
• Do not use fuel, nail varnish remover, paint thinner or similar products to clean the win-dows. Polishing
Polishing Is only necessary If the paint has lost its shine, and the gloss cannot be brought back by applying wax.
The car must be waxed after polishing if the polish used does not contain wax compounds to seal the paint.
CD
• In order to avoid damage, painted parts with a matt finish, plastic parts, headlight lenses and the tail lights should not be treated with polish or hard wax.
• Do not polish your vehicle in a sandy or dusty environment or when the vehicle is dirty.

Checklist (Continued)
8. VI/hen towing a trailer, unhitch the trailer from the vehicle and park it properly.
9. Remove any items of luggage from the lug-gage compartment.
10. Remove the spare wheel and vehicle tools from the vehicle.
11. Remove the hubcaps =>page 417.
Wheel bolts
Fig. 297 Loosening the wheel bolts for changing the wheels.
r-"f"'n First read and observe the Introductory l.-J,:..LJ Information and safety warnings & on page420.
Only the spanner delivered with the vehicle should be used to loosen the wheel bolts.
Only loosen the wheel bolts by approximately one turn before raising the vehicle with the vehicle jack.
If the wheel bolt is very tight, you may be able to loosen it by pushing down the end of the spanner carefully with your foot. Hold on to the car for sup-port and take care not to slip.
Loosening the wheel bolts
• Fit the box spanner over the wheel bolt as far as it will go =>Fig. 297.
• Hold the end of the box spanner and turn the wheel bolt one turn anticlockwise => &.
Loosening the anti-theft wheel bolt
The anti-theft wheel bolt must be bolted into posi-tion =>Fig. 298@ or@ on wheels with a wheel cover. Otherwise, it will not be possible to fit the wheel cover.
A WARNING
Ignoring any of the Items on this Important safety checklist can lead to accidents and se-vere Injuries.
• Always follow the Instructions In the checklist and observe the general safety pro-
Fig. 298 Tyre valve G) and locations of the anti-theft wheel bolt@ or@
• Take the adapter for anti-theft wheel bolts out of the vehicle toolkit.
• Insert the adapter into the anti-theft wheel bolt. Push it in as far as it will go.
• Insert the box spanner into the adapter as far as it will go.
• Hold the end of the box spanner and turn the wheel bolt one turn anticlockwise => &.
Important information about the wheel bolts
The design of the wheel rims and wheel bolts is matched to the factory-fitted wheels. If different rims are fitted, the correct wheel bolts with the right length and correctly shaped bolt heads must be used. This ensures that wheels are fitted securely and that the brake system works properly.
In certain circumstances, wheel bolts from a vehi-cle of the same model series may not be used.
Tightening torque for the wheel bolts
The tightening torque for wheel bolts for steel and alloy wheels is 180 Nm. The tightening torque should be checked with a torque wrench immedi-ately after changing a wheel. .,.
Practical tips 421

Dimensions
Fig. 324 Dimensions.
l""""'('n First read and observe the introductory L-J,.:.U information and safety warnings & on page 450.
The data in the table apply to the most basic mod-el.
Key for Fig. 324:
® Front track
Rear track
® Width
© Width across the mirrors
@ Height at kerb weight8l
® Height with open tailgate at kerb weight8l
® Height with open bonnet and kerb weight8l
@ Ground clearance in road-ready statecl between the axles
® Wheelbase
CD Length
-Turning circle diameter
•l Kerb weight without driver, without payload.
b) Figures were not available at time of publication.
c) Kerb weight with driver (75 kg) and service fluids.
452 I Technical data
The specified values can vary due to different tyre and wheel sizes, if additional equipment is fitted, for different model versions, for retrofitted accesso-ries, and for special vehicles. They can also vary in vehicles that have been manufactured for other countries.
Short wheelbase Long wheelbase
1,622 -1,634 mm
1,628 -1,640 mm
1,904 mm
2,297 mm
1,950-1 ,990 mm
b) b)
b) b)
178-202 mm
3,000 mm 3,400 mm
4,904-5,006 mm 5,304 -5,406 mm
11.9 m 13.2 m

Manual closing or opening Unlocking the selector lever lock manually
Manual gearbox ..................... . Refer also to Changing gears ........ . Towing .......................... .
Manual opening Driver door ...................... .
.4.15
263 263 447
414
Manual opening and closing . . . . . . . . . . 413 Sliding/tilting roof . . . . . . . . . . . . . . . . . . 415 Tailgate . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Manual operation of the pop-up roof Closing . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 Preliminary work . . . . . . . . . . . . . . . . . . . 224 Securing the pop-up roof manually from out-side the vehicle . . . . . . . . . . . . . . . . . . . 225
Mattress, 3-seat bench Components . . . . . . . . . . . . . . . . . . . . . . . 198 Long bed . . . . . . . . . . . . . . . . . . . . . . . . . 201 Medium-length bed . . . . . . . . . . . . . . . . . 199 Short bed . . . . . . . . . . . . . . . . . . . . . . . . . 198 Stowing . . . . . . . . . . . . . . . 203
Mattress, bench seat bed California . . . . . . . . . . . . . . 197 Mattress, California, bench seatlbed . . 196
Maximum speed . . . . . . . . . . . . . . . . . . . . . 450
MEDIA-IN socket . . . . . . . . . . . . . . . . . . . . . . 14
Memory seats . . . . . . . . . . . . . . . . . . . . . . . . 70
Metal-coated windscreen . . . . . . . . . . . . . . . . . . . . . . . . . 116
Metal-coated windscreen .....•......... 116
Mileage display . . . . . . . . . . . . . . . . . . . . . . . 20
Mirror mode . . . . . . . • . . . . . . . . • . . . . . . . . 171
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Blind spot . . . . . . . . . . . . . . . . . . . . . • . . . 121 Exterior mirrors . . . . . . . . . . . . . . . . . . . . 123 Folding in the mirrors . . . . . . . . . . . . . . . . 124 Interior mirror . . . . . . . . . . . . . • . . . . • • . . 122 Mobile online services see Volkswagen Car-Net . . . . . . . . . . . . . 402
Mobile telephone Rear-seat telephony................. 187 Use without an external aerial . . . . . . . . . 399
Modifications . . . . . . . . . . . . . . . . . . . . . . . . 396 Modifications to the vehicle . . . . . . . . • . . . 394 Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Move 3-seat bench ..... . ............. 74
Moving 2-seat arrangement, Business . . . . . . . . . 185 3-seat bench . . . . . . . . . . . . . . . . . . . . . . . 74 Bench seatlbed, California . . . . . . . . . . . . 195
Multi-flex board . . . . . . . . . . . . . . . . . . . . . . . 77
Multifunction steering wheel 27
Multivan
N
Assembling opaque shades for the wind-screen and the rear window . . . . . . . . . 176 Components of the opaque shades kit . . 175 Darkening the interior of the vehicle . . . . 175 Equipment . . . . . . . . . . . . . . . . . . . . . . . . 175 Fitting opaque shades for the windscreen and the rear window . . . . . . . . . . . . . . . 177 Fitting the opaque shades to the side win-dows . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Removing and stowing the opaque shades .1.79
Net partition . . . . . . . . . . . . . . . . . . . . . . . . 136
New engine . . . . . . . . . . . . . . . • . . . . . . . . . 394
New tyres . . . . . . . . . . . . . . . . . . . . . . . . . . 370
Noises Adaptive cruise control (ACC) . . . . . . . . . 299 Brake support systems . . . . . . . . . . . . . . 276 Engine . . . . . . . . . . . . . . . . . . . . . . . 259, 345 Rear axle differential lock . . . . . . . . . . . . . 286 Regeneration . . . . . . . . . . . . . . . . . . . . . . 409 Supplementary heating system . . . • . . . . 339 Tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
Number of seats . . . . • . . . . . . . . . . . . . . . . . 64 Business . . . . . . . . • . . . . . . . . . . . . . . . . 180 California ..... , . . . . . . . . . . . . . . . . . . . 193 Multivan ........................... 64
Number plate light (LED) . . . . . . • . . . . . . . 434
0
Octane number . . . . . . . . . . . . . . . . . . . . . . 344
Odometer . . . . . . . . . . . . . . . • . . . . . . . . . . . . 20
Oil see Engine oil . . . . . . . . . . . . . . . . . . . . . 353
Oil dipstick . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Old tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368 On-Board Diagnostic System (OBD) . . . . . 399
On line services see Volkswagen Car-Net . . . . . . . . . . . . . 402
Opaque shades Cleaning . . . . . . . . . . . • . . . . . . . . • . . . . . 393
Opaque shades kit Fabric shade . . . . . . . . . . . . . . . . . . . . . . 216 Roller blind . . . . . . . . . . . . . . . . . . . . . . . . 217 Sliding blind . . . . . . . . . . . . . . . . . • . . . . . 217
Opaque shades kit, California Integrated . . . . . . . . . . . . . . . . . . . • . . . . . 217 Removable . . . . . . . . . . . . . . . . . . . . . . . . 216
Opaque shades kit, Multivan Assembling opaque shades for the wind-screen and the rear window . . . . . . . . . 176 Components . . . . . . . . . . . . . . . . . . . . . . . 175
Index I 475