Page 227 of 456

227
3
Supra Owner's Manual3-1. CONTROLS
CONTROLS
The radar sensor is located on the front in the bumper.
Keep the radar sensor clean and 
unobstructed.
The camera is located on the front 
side of the rear-view mirror.
Keep the windscreen clean and 
clear in the area in front of the 
rear-view mirror.
The system can be used to opti-
mum effect on well-constructed 
roads.
The minimum speed that can be set 
is 30 km/h/20 mph.
The maximum speed that can be 
set is 160 km/h/100 mph.
Higher speeds can be set by 
switching to Cruise Control without 
distance control.
The system can also be activated 
when the vehicle is at a standstill. Overview
Buttons on the steering wheel
ButtonFunction
Cruise Control on/off, see 
page 228.
Store current speed.
Speed Limit Assist, see 
page 234: adopt the sug-
gested speed manually.
Press the button while the 
system is activated: To 
interrupt Cruise Control, 
see page 228.
While the system is inter-
rupted, press the button: 
To resume Cruise Control 
with last setting, see page 
230.
Setting the vehicle dis-
tance, see page 229.
Rocker switch:
Setting the speed, see 
page 229.
Radar sensor
Camera
Area of use 
     
        
        Page 247 of 456

247
3
Supra Owner's Manual3-1. CONTROLS
CONTROLS
2Tilt the Controller to the right.
3"Settings"
4"Cross-traffic alert"
5"Cross-traffic alert"
Or via Toyota Supra Command:
1"My vehicle"
2"Vehicle settings"
3"Parking"
4"Cross-traffic alert"
5"Cross-traffic alert"
If the system was activated on the 
Control Display, it is switched on 
automatically as soon as Parking 
Sensors or Panorama View is 
active and a gear is engaged.
The system is switched on at the 
rear when reverse gear is engaged.
The system switches off automati-
cally in the following situations:
If walking speed is exceeded.
When a certain distance is 
exceeded.
During active parking with the 
Park Assistant.
The Control Display shows the cor-responding display, an acoustic sig-
nal may sound and the light in the 
exterior mirror flashes.
The light in the exterior mirror 
flashes if other vehicles are 
detected by the rear sensors when 
the vehicle is moving backwards.
In the Parking Sensors view, the 
relevant boundary area flashes red 
if the sensors detect vehicles.
In addition to the visual display, a 
warning signal sounds when your 
own vehicle is moving in the corre- Switching on automatically
Switching off automatically
Wa rning
General
Light in the exterior mirror
Display in the Parking Sensors 
view
Acoustic warning 
     
        
        Page 257 of 456

257
3
Supra Owner's Manual3-1. CONTROLS
CONTROLS
■Via Toyota Supra Command
1"My vehicle" 
2"Vehicle settings"
3"Climate comfort"
4"Auxiliary ventilation"
5Select the required departure 
time.
6Setting the departure time.
7Select the day of the week if 
necessary.
■Operating requirements
If a departure time is to control 
when the independent ventilation is 
switched on, the relevant depar-
ture time must be activated first.
■Via Toyota Supra Command
1"My vehicle" 
2"Vehicle settings"
3"Climate comfort"
4"Auxiliary ventilation"
5"For departure time"
6Activate the required departure 
time.
The   symbol on the climate dis-
play signals that a departure time 
has been activated.This chapter describes all standard, 
country-specific and special equip-
ment available for the model series. 
It may therefore describe equip-
ment and functions which are not 
installed in your vehicle, for exam-
ple on account of the optional 
equipment selected or the country 
specification. This also applies to 
safety-relevant functions and sys-
tems. Please comply with the rele-
vant laws and regulations when 
using the corresponding functions 
and systems.
Fold the sun visor downwards or 
upwards.
A vanity mirror is situated in the sun 
visor behind a cover. The mirror 
light switches on when the cover is 
opened.
The cigarette lighter attachment 
can be used as a socket for electri- Setting the departure time
Activating the departure time
Display
Interior equipment
Vehicle equipment
Sun visor
Glare protection
Vanity mirror
Power sockets
Principle