2019 TOYOTA PRIUS rear view mirror

22
FEATURES & OPERATIONS
AUTOMATIC AIR CONDITIONING - 6.1” DISPLAY (IF EQUIPPED)
Air conditioning/heating
Air conditioningON/OFF
Recirculate cabin air (outside air when OFF)
Airflow vent
Windshield defogger
Outside rearview mirror/Rear window defogger
Automatic climate control ONAdjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically.
Smart-flow (S-Flow) mode gives airflow priority to the front seats, reducing the airflow and air conditioning effect onrear seats when there are no passengers.
Climate control OFF
Temperature settingFan speed
Climate control that minimizes fuel consumption. This option may reduce fan speed.
Adjusters Up/Down: Change temperature,change fan speed, change vent mode.
Seat heaters (if equipped)
Driver seatFrontpassenger seat
The “POWER” switch must be in ACCESSORY or IGNITION ON position to be used.
116674_MY19_Prius_QRG_V3_ML_1126_TEXT_R1.indd 2211/26/18 10:52 PM

23
AUTOMATIC AIR CONDITIONING - 11.6” DISPLAY (IF EQUIPPED)
Air conditioning temperature control
Windshield defogger
Rear window and outside rear view mirrors defogger
Temperature setting
Fan speed settingAutomatic mode setting
Air conditioning control screen
Airflow mode setting
S-FLOW mode settingAir conditioningECO mode settingA/C settingOutside/recirculated air mode setting
OVERVIEW
FEATURES
& OPERATIONS
TOYOTA
SAFETY
SENSE
SAFETY
& EMERGENCY
FEATURES
Touch area to display air conditioning control screen (See below)
116674_MY19_Prius_QRG_V3_ML_1126_TEXT_R1.indd 2311/26/18 10:52 PM

29
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Blind Spot Monitor with Rear Cross Traffic
Alert (BSM w/RCTA) (if equipped)
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in making the decision when to
change lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The system is designed to use radar sensors to detect vehicles traveling in the
Prius’s blind spot. If a vehicle is detected, the driver will be alerted via the outside
rear view side mirror indicators.
Note: Use in the Multi-Information Display (MID) to change settings. The
system will continue in the last state it was in (ON or OFF) when the engine is
started again.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
IndicatorIndicatorBSM on/off screen and indicator
Buzzer (RCTA only)
RCTA detection display (RCTA only)
116674_MY19_Prius_QRG_V3_ML_1126_TEXT_R1.indd 2911/26/18 10:52 PM

32
Quick overview-Toyota Safety Sense™ P (TSS-P)
Sensors
TSS-P combines an in-vehicle camera mounted in front of the inside rear view mirror
and a millimeter-wave radar mounted in the front grill. These sensors support the
driver assist systems.
Camera sensor
Radar sensor
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ P (TSS-P) is a set of active safety technologies designed
to help mitigate or prevent collisions across a wide range of traffic situations, in
certain conditions. TSS-P is designed to help support the driver’s awareness,
decision making and vehicle operation contributing to a safe driving experience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense
Lane Departure Alert with Steering Assist (LDA w/SA)LDA w/SA is designed to provide notification when the system detects an unintended lane departure.
The Steering Assist function is designed to provide small corrective steering inputs to the steering wheel for a short period of time to help keep the vehicle in its lane.
Automatic High Beams (AHB)AHB is designed to detect the headlights of oncoming vehicles and the tail lights of preceding vehicles and switch between high beams and low beams as appropriate.
Pre-Collision System with Pedestrian Detection (PCS w/PD)PCS w/PD is designed to provide alert, mitigation, and/or avoidance support in certain conditions, when the system detects a potential collision with a preceding vehicle is likely to occur.
The advanced millimeter-wave radar sensor system is designed to
work with the camera sensor to help recognize a preceding pedestrian,
and provide an alert, mitigation and/or avoidance support in certain
conditions.
Full-Speed Range Dynamic Radar Cruise Control (DRCC)DRCC is designed to help maintain a pre-set distance to a preceding vehicle when the preceding vehicle is traveling at a lower speed.
116674_MY19_Prius_QRG_V3_ML_1126_TEXT_R1.indd 3211/26/18 10:52 PM