2019 MERCEDES-BENZ SPRINTER set clock

#
Tounlo ck:pull lo cking pin 2upwards man‐
ually or use thec ent rallockin gbutton to
unlo ckthes liding door (/ page45). #
Press button 1or pull outside handle 3.
The sliding door opens or closes. #
Press button 1again or pull outside handle
3.
The sliding door stops moving. Un
locking thee lectric sliding door manually If
th er eh as been amalfunction or if theb attery
has been disconnected, youc an use release
cat ch2 todisconnect thes liding door from the
electric mo tor.Then, youc an open or close the
door manually. #
Vehicles with comple tesliding door trim:
re mo vethec over from release cat ch2.
Service ope ratio nisa ccessible. #
Todisconnect the sliding doo rfromt he
electric mo tor:tur nrelease catch 2180°
clockwise.
The "MAN" position is set. #
Tounlo ck:pull lo cking pin 3upwards man‐
ually or use thec ent rallockin gbutton to
unlo ckthes liding door (/ page45). #
Press button 1. #
Open or close thes liding door wit hthe out‐
side/inside door handle. #
Toconnect thes liding door tothee lectric
mo tor:tur nrelease catch 2180° counter-
clockwise.
The "AUTO" position is set. #
Adjus tthe sliding door (/ page50).
If it is no tpossible to rectifythe malfunction: #
Visit aq ualified specialis tworks hop. Re
setting thee lectric sliding door Slidin
gdoor buttons on thec enter console Sliding door button on
thed oor sill (B-pillar)
Yo um ustrese tthe sliding door if ther eh as been
am alfunction or avoltag esuppl yinter ruption. 50
Opening and closing

Ve
hicles wit hpartial LED tail lamps
1 Reversing lights: P21W
2 License plate lamp:W5W
3 Rear fogl ights: P21W
Ta il lamps (Cargo Vana nd Passenger Van)
Re quirements:
R Brak
elights/tail lamps/perime terl ights:
light bulb typ eP21W
R Reversing lights: bulb typeP21W
R Rear fogl ights: bulb type P21W 1
Brak elights/tai llamps/perim eter lights
2 Reversing light
3 Rear fogl ight #
Switc hoffthel ighting sy stem. #
Open ther ear door. #
Toremo ve: loose nscrews 1and pull out
th et ail lamps in thed irection of thea rrow. #
Remo vethec onnector from bulb mount 3. #
Loosen scr ews2and remo vebulb mount
3 from thet ail lamp. #
Gently tur nthe bulb counter-clockwise and
ta ke it out of thes ocket. #
Inse rtthen ew bulb int othe soc keta nd tur nit
clo ckwise. #
Toinstall: setb ulb mount 3onthet ail lamp
and scr ewin scr ews2. #
Press thec onnector int obulb mount 3. #
Inser tthe tail lam pand scr ewin scr ews1.
License plat elamp
Re quirements:
R License plat elamp: light bulb type W5W Light and vision
87

The on-boar
dcomputer is operated via left-hand
To uc hC ontrol 2and theb ackb utton on thel eft
1. The on-boar
dcomputer is operated using thef ol‐
lowing buttons:
R theb ackb utton on thel eft 1
R thel eft-hand Touc hC ontrol 2
R them ain menu button on thel eft 3
The following menus ar eavailable:
R Service
R Assistance
R Trip
R Navigation
R Radio
R Media
R Phone
R Settings #
Tocall up them ainm enu: press theb ack
button on thel eft 1 repeatedly ,orpress and
hold it.
% Ve
hicles without Activ eD ista nce Assist
DISTRO NIC:youc an call up them ain menu
of theo n-boar dcomputer wit hthe 00E2 but‐
to n. #
Tobrows ethrough them enu bar: swipeto
th el eftorr ight on left-han dTouc hControl
2. #
Tocall up amenuorc onfirmas election:
press left-han dTouc hControl 2. #
Tobrows ethrough displa ysor lists in the
menu: swipe upwards or down wardsonl eft-
hand Touc hC ontrol 2. #
Tocall up asubmenu or confir maselec‐
tion: press left-han dTouc hControl 2. #
Toexitas ubmenu: presstheb ackb utton on
th el eft 1.
If yo ua reinas ubmenu and press and hold the
bac kbutton on thel eft 1,t he main menu
appears. Overvie
wofthe displa yson them ultifunc‐
tion display In
stru ment Displa ywithc olor display
1 Outsid etemperature
2 Transmission position
3 Clock
4 Displa ysection In
stru ment Displa ywithb lack and whit edis‐
play
1 Outside temp erature
2 Displa ysection
3 Clock
4 Transmission position
Fu rther displa yson them ultifunction display:
0097 Gearshif
trecommendation
é Parking Assis tPARKTRONIC switched
off
00B2 Cruise control (/
page 142)
ç ActiveD ista nce Assi stDISTRONIC
(/ page 144) 16 8
Instrument Displa yand on-boar dcomputer

To
uc hC ontrol Operating
Touc hC ontrol (multimedi asystem) 1
© button
Calls up theh ome screen
2 Touc hC ontrol
3 Backbutton
Re turns tothep reviou sdisplay
4 Cont rolp anel form ultimedia sy stem
Press the004B rocker switc hdown: sho ws
fa vo rites
Tu rn thec ont rolk no b: sets thev olume
Press thec ont rolk no b: switches sound off
Press the0061 rocker switc hup: makes or
accepts acall
Press the0076 rocker switc hdown: ends or
declines acall #
Tocall up theh om escreen: press button
1.
or #
Press and hold button 3.#
Toopen amenu or lis t:press Touc hC ontrol
2. #
Toclose amenuorl ist: press button 3. #
Toselect amenu item: swipe up, down, left
or right on Touc hC ontrol 2. #
Press Touc hC ontrol 2. #
Tomo vethed igita lmap: swipe in an ydirec‐
tion. Setting
thes ensitivit yfor th eTouc hControl
Multimedi asystem:
4 © 5
Settings 5
System
5 Controls 5
Touch Control Sensitivity #
Select Fast,Medium orSlow .
Switching acoustic operating feedba ckfor
th eT ouc hControl on/off
Multimedi asystem:
4 © 5
Settings 5
System
5 Controls
The function is suppor tedbyt he selection in a
list. #
Select Acoustic Operating Feedback. #
Set Normal, LoudorOff.
If th ef unction is activated youw ill hear a
clickin gsoun dwhen sc rolling in alist. When
th eb eginnin gorend ofthel istisr eached you
will hear ano ther clicking sound. To
uchscreen Operating
thet ouchsc reen
Ta pping #
Toselect amenu item or entr y:tapona
symbol or an ent ry. #
Toincrease them apscale: tapt wice
qu ickl ywitho nefinger. #
Toreduce the map scale: tapw itht wo fin‐
ge rs. #
Toenter character swiththek eyboard: tap
on abutton.
Single-finger swipe #
Tonavigat einmenus:swipe up, down, left
or right. #
Tomo vethed igita lmap: swipe in an ydirec‐
tion. #
Touse handwriting toenter characters:
writ ethe character wit honefinger on the
to uchsc reen.
Tw o-finger swipe #
Tozoo minand out of the map: movetwo
fi nger stogether or apart. #
Toenlar georreduce the size of asection
of aw ebsite: movetwof inger stogether or
apart. #
Totur nthe map: turnc ounter-clo ckwise or
clockwis eusing tw ofingers. MBUX multimedia sy
stem 18 9

This gives
yous ufficient time toadap tyour
driving styletot he traf ficc onditions.
The use of Ca r-to -X-Communication requiresthe
re gular transmission of vehicle dat atoDaimler
AG .The da taisthen immediatel ypseudonymized
by Daimle rAG. Th evehicle dat aisdeleteda fter
an appropriat eamoun toftimeh as elapse d(sev‐
eral weeks) and is no tstore dp ermanent ly.
% Dat
awhich ser vesasi dentification is
re placed during thep seudonymization proc‐
ess. In this wa y,yo ur identit yisprotected
agains taccess byunauthorize dthirdp arties.
Displaying hazar dwarnings
Multimedia sy stem:
4 © #
Select Navigation .
If hazar dwarning sareavailable these will be
shown on them ap.
The following hazar dwarning sareshown on the
map:
R broken-down vehicles
R accidents
R hazardous weather
R general hazards
R hazard warning lights, when switched on
% If
th ev ehicle is approaching ahazar dspot
wit hav ehicle speed of at leas t37m ph
(60 km/h), thev oice output "T raffic incident
ahead" is issued.
The voice output is no tissued forh azardous
we ather.
Sending haza rdwa rnings
Au tomatically de tected haza rdwa rnings ar esent
by thev ehicle. #
Tosend ahaza rdwa rning yourself: tapon
th em edia displa ywhen them ap is shown.
The navigation menu is shown. #
Select ¡. #
Select Report Traffic Incident.
Ap romp tiss hown. #
Select Yes.
The Thank You for Supportin gAcciden tPre-
vention messageappears. Map and compass
Setting
them apscale
Multimedia sy stem:
4 © 5
Navigation
Zooming in #
When them ap is shown, tapt wice quickly
wit ho nefinger on them edia displa y.
or #
Movetwof inger saparton them edia displa y.
Zooming out #
Tapw itht wo finger sont he media displa y.
or #
Movetwof inger stogether on them edia dis‐
pla y.
% Yo
uc an se tthe unit of measurement of the
map scale (/ page202).
Moving them ap
Multimedia sy stem:
4 © 5
Navigation #
Movethef inger in an ydirec tion on the
to uchsc reen when them ap is shown.
When them ap has been mo vedt he following
informatio nappear sinthestatus line ,for exam‐
ple:
R The dis tance from thev ehicle's cur rent posi‐
tion is shown.
R Information abou tthe cur rent map position is
shown, e.g. then ame of ther oad.
The following function sareavailable:
R Select adestinatio nonthe map
(/ page210).
R Selec taPOI (/ page 209).
R Sho wtraffic incidents on them ap
(/ page222).
This function is no tavailable in all countries. #
Torese tthe map tothec urrent position
of thev ehicle: tapons ymbol \.
Ro tating them ap #
With twof ingers, rotat ec ounter-clockwise or
clockwise on them edia sy stem displa y. 224
MBUX multimedia sy stem

&
WARNING Risk offire and injur yfrom
engine oil
If engine oil comes int ocontact wi thhotc om‐
ponent parts in thee ngine compartment, it
ma yignite. #
Mak esuret hat no engine oil is spilled
next tothef iller opening. #
Allo wthe engine tocool of fand thor‐
oughly clean thee ngine oil from compo‐
nent parts befor estartin gt he vehicle. *
NO
TEEngine damag eduetoincor rect oil
fi lter ,incor rect oil or additi ve #
Do no tuse engine oi loranoilfilter with
specifications deviatin gfromt hose
re qu ired fort he prescribed service
inter vals.
Mercedes-Benz recommends using original or
te sted replacement and service parts. #
Do no tchang ethe engine oil or oil filter
in order tosetc hang einter vals longer
th an those prescribed. #
Do no tuse an yadditive. #
Followt he instructions on thes ervice
inter vald ispla yfor changing thee ngine
oil. *
NO
TEDama gecaused byaddin gtoo
muc hengine oil To
om uche ngine oil can damag ethe engine
or thec atalytic con verter. #
Have excess engine oil remo vedata
qu alified specialis tworks hop. Engine OM651
Engine OM642
#
Turn cap 1counter-clockwise and remo veit. #
Adde ngin eoil. #
Replace cap 1and tur nitclockwise until it
engages. #
Chec kthe oil le vela ga in .C hec kusing theo n-
boar dcomputer (/ page267),ch eckw ith
th eo il dipstic k(/pag e266). Checking
thec oolant le vel &
WARNING Risk of bu rnsf romh otcom‐
ponent parts in thee ngine compartment
Cer tainc omponents in thee ngine compart‐
ment can be very hot, e.g. thee ngine, the
ra diator and parts of thee xhau stsystem. #
Allo wthe engine tocool down and only
to uc hc omponent parts desc ribed in the
fo llowing. 268
Maintenance and care

Only position
thej ackont he jac ksuppor tpoints
intended fort his purpose. Youc oul do therwise
damag ethe vehicle.
Impor tant no tesonu singthej ack:
R Onlyusethev ehicle-speci ficj ackt hat has
been tested and appr ovedbyM ercedes-Benz
to raise thev ehicle. If thej ackisu sed incor‐
re ctly ,itc ould tip over while thev ehicle is
ra ised.
R The jac kisdesigned onl ytoraisethev ehicle
fo ras horttime whil eawheelisb eing
ch anged and is no tsuitable forc arrying out
maintenance workunde rthe vehicle.
R Avoid changing awheel on uphill and downhill
slopes.
R The jac kmustbep lacedonaf irm,flat and
non-slip sur face. If necessar y,use alarge,
fl at, load bearing and non-slip unde rlay.
R The base of thej ackisp ositioned vertically
under thej acks uppor tpoint.
Saf etyi nstruction swhile thev ehicle is raised:
R Do no tputyour hands or feet unde rthe vehi‐
cle.
R Do no tlie underneat hthe vehicle.
R Do no tstart thee ngine and do no trelease
th ep arking brake.
R Do no topen or close an ydoors.
Ve hicles with rear wheel drive Jack
suppor tpoints
Only use them iddle roda nd thep um pleve rrod
wit hthe larges tdiame terf or thej ackasa lug
wrenc hextension. Only inse rtthem iddle rodon
th el ug wrench, and alw aysasf ar as it will go.
Otherwise, ther ods could bend and defor msomuc
hthat they can no longer be use daspump
le ve rs fort he jac k. #
Toprepar ethe hydrauli cjack: insertthe
th irdr od of pum plever 1fort he jac kinto
th el ug wrenc hextension. #
Close pressur erelease scr ew3. #
Todo this, use thef lattened sectio nonpump
le ver 1totur np ressur erelease scr ew3
clockwise tothes top.
% Do no
tturnp ressur erelease scr ew3 more
th an one or tw ofull turns .Hydraulic fluid
coul dotherwise escape. #
Inser tpum plever 1withthe larges trod into
th er eces sont he jac kand secur ebyturning
it clo ckwise. #
Place thej ackv erticall ybeneat hthe jac ksup‐
por tpoints described belo w. Jac
ksuppor tpoint, front axle 314
Wheels and tires

#
Place thej acktoo ne side. #
Pull ther od wit hthe smalles tdiame tero ffthe
pum pleve r.
The shor tened pu mpleve rs erve sasal ug
wrenc hextension. #
Startin gwitht he middle rod, slide thel ug
wrenc hextensio nasfar as it will go ont othe
lug wrench. #
Tighten thew heel bolts or nuts evenlyint he
sequence indicated (1 to6 ).
Specified tightenin gtorque:
R Steel wheel bolts: 177l b-f t(24 0N m)
R Whee lnuts: 133lb-f t(18 0N m)
R Alloywheel bolts: 133lb-f t(18 0N m) #
Push thep isto nont hehydraulic jac kinagain
and close thep ressur erelease scr ew. #
Vehicles with all-wheel drive: turnthe jack
spindle clockwise as farasitw illg o.
% Yo
uc an no winstallth eh ub caps on steel
wheels wit hwheel bolts. The ins tallation pro‐
cedur edepends on whe ther theh ub cap acts
as atrimt hat co vers thew hole wheel, or just
co vers thec enter. #
Wheel wit hhub cap: position theo pening for
th et irev alveint he hub cap overthe tire
va lve. #
Push thee dgeoft he hub cap ont othe wheel
ri mw ithb othh ands until it engages into
place. Mak esuret he hub cap retaining
cat ches engag eonthesteel wheel. #
Wheel with central hub cap: positionthe
re tainin glugs of thec ent ralh ub cap overthe
whee lbolts. #
Hitthem iddle of theh ub cap toengag eiton
th ew heel. #
Secur ethe faulty wheel in thes par ew heel
brac ket. #
Vehicles with Super Single tires: transport
th ed efectiv erear wheel in thel oad area. The
re ar wheel is tool arge fort he spar ewheel
brac ket. #
Chec kthe tir epressur eoft he newl yins talled
wheel and adjus titifnecessar y. #
Retighten thew heel bolts or wheel nuts tothe
specified tightening torque af tert he vehicle
has been driven 31miles (50 km). #
When using awhee lors parew hee lwitha
ne worn ewly painted whee lrim, ha vethe
wheel bolt sornutsr etightene dafter appr ox‐
ima tely 620 mile s(1,000 km) to3,10 0m iles
(5,000 km).
% Ve
hicles with thet irep ressur emonitor
sy stem: all ins talled wheels mus tbeequip‐
ped wit hfunctioning sensors.
Mak esuretoo bservethef ollowing fur ther rela‐
te ds ubject:
R Notesont irep ressur e(/pag e296) Spar
ewheel Note
sont he spar ewheel &
WARNING Risk of accident caused by
incor rect wheel and tir edimensions
Wheel and tir edimensions as well as thet ype
of tir emayvary between thes par ew heel and
th ew heel tobe replaced. When thes pare
wheel is ins talled, driving characteristic smay
be se verely af fected.
To prev ent hazardous situations: #
Adapty our driving stylea ccording lyand
driv ecarefull y. #
Neverins tall mor ethan one spar ewheel
th at dif fers from thew heel tobe
re placed. #
Onlyusethes par ew heel that dif fers
from thew heel tobe replaced fora
shor ttime. #
Do no tswitc hoffESP ®
. #
Have thes par ew heel of adiffe re nt size
re placed at then eares tqualified spe‐
cialis tworks hop. The wheel and tire Wheels and tires
317