2019 MERCEDES-BENZ SPRINTER reset

&
WARNING Risk of accident du eto
object sinthe driver's foot we ll
Object sinthe driver's foot we ll ma yimp ede
pedal tr avel or bloc kadepressed pedal.
This jeopardizes theo perating and road
saf etyoft hevehicle. #
Stow all object sinthevehicle securely
so that they canno tget intot he driver's
fo ot we ll. #
Alwaysi ns tallth ef loor mats securely
and as prescribed in order toensure
th at ther eisa lway ss ufficient room for
th ep edals. #
Do no tuse loose floor mats and do not
place floor mats on topofo ne ano ther. *
NO
TEBatter ydisch arging from using
device sconnec tedtot he diagnostics
connection Using devices at
thed iagnostics connection
drains theb atter y. #
Chec kthe charge leve loft he batter y. #
Ifth ec har geleve lisl ow,char getheb at‐
te ry,e .g. bydriving aconsiderable dis‐
ta nce. Connecting equipment
tothed iagnostics connec‐
tion can lead toemissions monitoring information
being reset, fore xamp le. This ma ylead tothe
ve hicle failing tomee tthe requ irements of the
next emissions inspection du ring them ain
inspection. Note
sonc hanges tothee ngine output
Output inc reases can:
R chang ethe emission values.
R lead tomalfunctions.
R result in consequential damage.
The operating saf etyoft he engine is no tguaran‐
te ed in all situations.
An ytampering wit hthe engine management in
order toinc rease thee ngine output will lead to
th el oss of theN ew Vehicle Limited Warrant yand
ot her warrant yentitlements.
If yo us ellthev ehicle, infor mthe buyer of any
alterations tothev ehicle's engine output. If you
do no tinfor mthe buyer ,this ma yconstitut ea
punishable of fense under nationa llegis lation. Qualifie
dspeciali stwo rkshop
Aq ualified specialis tworks hop has then ecessary
special skills, tools and qualification stocorrectly
car ryout an ynecessar yworkony ourvehicle.
This particular lyapplies tosaf ety-re leva nt wo rks.
Alw aysh ave thef ollowing workon thev ehicle
car ried out at aqualified specialis tworks hop:
R safety-re leva nt wo rks
R service and maintenance work
R repair work
R modifications as well as ins tallation sand con‐
ve rsions
R workon electronic component parts
Mercedes-Benz recommends that youu se an
authorize dMercedes-Ben zCenter fort his pur‐
pose. Ve
hicl eregistration
Mercedes-Ben zmayask its service cen terto
car ryout tech nica linspections on cer tain vehi‐
cles. The quality or saf etyoft hevehicle is
impr ovedasar esult of thei nspection.
Mercedes-Benz can onl yinfor myou aboutv ehicle
ch ecks if it Mercedes-Benz has your registration
data.
In thef ollowing cases your vehicle ma ynotbe
re gis tere dtoy ouyet:
R Youd id no tpurch ase your vehicle at an
authorized specialis tdealer.
R Your vehicle has no tyet been inspected at an
au thorized Mercedes-Benz Center.
It is advisable toregis tery our vehicle wit han
authorized Mercedes-BenzC enter.
Infor mMercedes-Benzass oon as possible about
an yc hang eina ddress or vehicle ownership.
Yo uc an do this, fore xamp le, at an authorized
Mercedes-Ben zCenter. Cor
rect use of thev ehicle
If yo ur emo ve wa rning sticke rs,o ther sm ayfailto
re cognize thed angers. Lea ve warning sticke rs in
position.
Obser vethef ollowing information in particular
when operating thev ehicle:
R Safetyn otes in these Operating Instructions
R Tech nica ldataf or thev ehicle 24
Generaln otes

card contains, in compact
form ,the mos timp or‐
ta nt information abou tyour vehicle e.g. ther out‐
ing of electric cables.
Fu rther information can be found at http://
www.mercedes-benz.de/qr-code. Data
storage Electronic control units
Electronic control unit
sareins talled in your vehi‐
cle. Some of these ar enecessar yfor thes afe
operation of your vehicle, while some assis tyou
when driving (driver assis tance sy stems). In addi‐
tion, your vehicle pr ovides com fort and enter tain‐
men tfunctions, whic harealso made possible by
electronic cont rolu nits.
The elect ronic control units contai ndatam emo‐
ri es whic hcan temp orarily or permanently store
te ch nica linformation abou tthe vehicle's operat‐
ing state, component loads, main tenance requ ire‐
ments and tech nica leventsorm alfunctions.
In general ,this information documents thes tate
of ac omponent part, amodule, asystemort he
sur rounding ssucha s:
R operatin gstatesofs ystemc omponents (e.g.
fl uid le vels, batter ystatus ,tirep ressure)
R status messages concernin gthe vehicle and
its individual components (e.g. number of
wheel revo lutions/speed, deceleration, lateral
acceleration ,displa yoft hefast ened seat
belts)
R malfunctions or defects in impor tant sy stem
components (e.g. lights, brakes)
R information on events leading tovehicle dam‐
age
R system reaction sinspecial drivin gsituations
(e.g. airbag deployment, inter vention of sta‐
bilit ycontrol sy stems)
R ambient conditions (e.g. temp erature, rain
sensor)
In addition toprov iding thea ctual cont rolu nit
function ,this dat aassists them anufacturer in
de tecting and rectifying malfunctions and opti‐
mizing vehicle functions. The majority of this data
is temp orar yand is onl yprocessed in thev ehicle
itself. Onl yasmall portion of thed ataiss tore din
th ee vent or malfunction memo ry.
When your vehicle is serviced, tech nica ldata
from thev ehicle can be read out byservice net‐
wo rkemplo yees (e.g. workshops, manufacturers)
or thirdp arties (e.g. breakdown services). Serv‐ ices include
repair services, maintenanc epro‐
cesses, warrant yclaim sand quality assurance
measures, fore xamp le. The read out is per‐
fo rm ed via thel egally prescribed por tfor the
diagnostics connection in thev ehicle. The
re spectiv eservice networ klocations or thirdp ar‐
ties collect, proces sand use this data. They
document tech nica lstatuses of thev ehicle,
assis tinfinding malfunctions an dimp roving qual‐
ity and ar etransmitted tothem anufacturer ,if
necessar y.Fu rthermore, them anufacturer is sub‐
ject toproduct liability .For this, them anufacturer
re qu ires tech nica ldataf romv ehicles.
Malfunction memories in thev ehicle can be reset
by aservic eoutle tasp artofr epair or mainte‐
nanc ework.
Depending on thes elected equipment, youc an
impor tdatai ntov ehicle con venience and info‐
ta inment function syourself.
This includes, fore xamp le:
R multimedi adatas uchasm usic,films or pho‐
to sf or playbac kinanintegratedm ultimedia
sy stem
R address book dat afor use in connection with
an integrated hands-free sy stem or an inte‐
grated navigation sy stem
R entered navigation destinations
R dataabout theu se of Interne tservices
This dat acan be sa vedl ocall yint hevehicle or it
is located on adevice whic hyou ha veconnected
to thev ehicle (e.g. smartphone, USB flash drive
or MP3 pla yer). If this dat aisstore dint hevehi‐
cle, youc an dele teit at an ytime. This dat ais
sent tothirdp arties onl yatyourrequ est, particu‐
lar lywhen youu se online services in accordance
wit hthe settings that youh ave selected.
Yo uc an stor eorc hangeconvenience settings/
individualization in thev ehicle at an ytime.
Depending on thee quipment, this includes, for
ex ample:
R seat and steering wheel position settings
R suspension and climat econt rols ettings
R Individualization suc hasinterior lighting
If yo ur vehicle is accordingly equipped,y ou can
connec tyour smartphone or ano ther mobile end
device tothev ehicle. Youc an control this by
means of thec ont role lements integrated in the
ve hicle. Images and audio from thes martphone
can be output via them ultimedia sy stem. Cer tain 26
General no tes

The windo
wsinthef ront door scan also be oper‐
ated automaticall y. #
Toopen comple tely: briefly press button 1
or 2 beyond thep oint of resis tance.
Au tomatic operation wills tart. #
Toclose comple tely: briefly pull button 1
or 2 beyond thep oint of resis tance.
Au tomatic operation wills tart. #
Tointer rupt automatic operation: briefly
press or pull button 1or2 again.
% If an objec
tbloc ksas ide wind owduring the
automatic closin gprocess, thes ide window
will open again automaticall y.The automatic
re ve rsing function is onl yanaid and is no ta
substitut efor your attentiveness.
% If automatic operation of
thes ide windo ws
does no twork, ther eisnoa nti-entra pment
function.
Au tomatic reve rsing function of thes ide win‐
do ws
If an object bloc ksas ide wind owduring thec los‐
ing process, thes ide windo wwill open again
automaticall y.The automatic reve rsing function is
onl yana id and is no tasubstitut efor your atten‐
tiveness. #
During thec losing process, mak esuret hat no
body parts ar einthe closing area. &
WARNING Risk of becoming trapped
despit ether ebeing reve rsep rotection on
th es ide window
The reve rsef unction does no treact:
R Tosoft, light and thin objects, e.g. fingers
R Over thel ast 00CFin (4 mm) of thec losing
path
R During resetting
R When thes ide windo wisclosed again
manuall yimmediatel yafter automatic
re ve rsing
This means that ther everse function cann ot
pr eve nt someone from becoming trappe din
th ese situations. #
During thec losing process, mak esure
th at no body parts ar einthe closing
area. #
If someone becomes trapped, press the
0062 button toopen thes ide window
again. Ve
ntilating thev ehicle befor estarting ajour‐
ne y( conve nience opening) &
WARNING Risk of entrapment when
opening asidew indow
Whe nopening asidew indo w, parts of the
body could be dr awninorb ecome trapped
between thes ide windo wand windo wframe. #
When opening, mak esuret hat nobody
is touchin gthe side windo w. #
Release theb utton immediately if some‐
body becomes trapped. Yo
uc an ventilat ethe vehicle befor eyou start
driving.
To do this, thek eyis used tocar ryout thef ollow‐
ing function ssimultaneously:
R unloc kthe vehicle
R open thes ide windo ws
The "con venience opening "function can only be
ope ratedu sing thek ey.T he keym ustbeinc lose
pr ox imit ytot he driver's or front-passenge rdoor. #
Press and hold the0036 button on thek ey.
The following function sareper form ed:
R thev ehicle is unloc ked
R thes ide windo wsareo pened #
Tointer rupt convenience opening: release
the 0036 button. Closing side windo
wsfrom theo utside (con‐
ve nience closing) &
WARNING Risk of entrapment caused by
inadver tent con venience closing
Whe nthe con venience closing featur eis
operating, parts of theb ody could become
trapped in thec losing area of thes ide win‐
do ws. #
Obser vethec omple teclosing proce‐
du re when using con venience closing. #
Whe nclosing ,makes uret hat no body
parts ar einthe closing area. #
Press and hold the0037 button on thek ey.
The following function sareper form ed:
R The vehicle is loc ked
R The side windo wsarec losed Opening and closing
55

#
Adjus tthe seat int othe desired position. #
Press memor ybutton Mtogether wit hone of
th ep rese tp osition buttons 1,2or3.
An acou stic signal sounds .The settings are
st ored. #
Tocall up: press and hold ther ele vant preset
position button 1,2or3u ntilthef ront seat is
in thes tore dp osition. Ro
tating thef ront seats &
WARNING Risk of inju ryor deat hifthe
driver's seat and front-passenge rseat
ar en otengaged
If th ed rive r's and front-passenger seats are
no te ngaged in thed irection of tr avelduring
th et rip, ther estraint sy stems cann otoffer
pr otection as intended. #
Enga gethed rive r's and front-passenger
seat in thed irection of tr avel befor ethe
engine is star ted. &
WARNING Risk of inju ryfrom adju sting
th ev ehicle settings while thev ehicle is in
motion
Yo uc oul dlose control of thev ehicle in the
fo llowing situations:
R ifyo ua djus tthe driver's seat, theh ead
re stra int ,the steering wheel or them irror
while thev ehicle is in motion
R ifyo uf asteny our seat belt whilet hevehi‐
cle is in motion #
Befor estarti ngthee ngine: adjus tthe
driver's seat, theh ead restra int ,the st
eering wheel or them irro ra nd fast en
yo ur seat belt. Yo
uc an rotate thed rive r's and front-passenger
seat 50 °and 180°.T he seats engag ebothin
and opposit etothe direction of tra velasw ell as
at 50 °totheexit. #
Ensur ethat thep arking brak eisapplied and
th eb rake leve risf olded down wardsasf ar as
it will go (/ page134). #
Adjus tthe steering wheel in suc hawaythat
th er eiss ufficient free space torotate and
adjus tthe driver's seat (/ page72). #
Slide thef ront-passen gers eat forw ardb efore
ro tating it (/ page 60). #
Torotat ethe sea t:push le ver1towa rds
th ev ehicle center and rotat ethe seat slightly
in wa rds.
The rotatio nd eviceisu nlocked. #
Release le ver1again. #
Rotate thes eat byaround 50 °outwa rdsor
in wa rdsi ntot he requ ired position. 66
Seatsand stow age

Switching
ther ear windo wwiperon/off 1
00E2 Single wipe/wash
2 00C5 Intermittent wiping #
Single wipe: press button1tothep oint of
re sis tance. #
Wiping with washer fluid: press button 1
be yond thep oint of resis tan ce. #
Toswitc hintermittent wiping on or off:
press button 2.
If th er ear windo wwiper is swit ched on, the
00C5 symbol will appearont he Instrument
Displa y. Re
placing the windshiel dwiper blades &
WARNING Risk of becoming trapped if
th ew indshield wiper sareswitched on
while wiper blades ar ebeing replaced
If th ew indshield wiper sbegin tomo vewhile
yo ua rechanging thew iper blades, youc an
be trapped bythew iper arm. #
Alwayss witc hoffthew indshield wipers
and thei gnition befor echanging the
wiper blades. &
WARNING Risk of inju ryfrom using the
windshield wiper swhile thee ngine hood
is open
When thee ngine hood is open and thew ind‐
shield wiper saresetinm otion, youc an be
trapped bythew iper linkage. #
Alwayss witc hoffthew indshield wipers
and ignition befor eopening thee ngine
hood. %
If
th ew iper blades ar eworno ut, they will not
wipe thew indshield proper ly.R eplace the
wiper blades twic eayear,prefera blyin
spring and fall. #
Fold wiper arm 3away from thew indshield. #
Hold wiper arm 3and tur nthe wiper blade
aw ay from wiper arm 3inthed irection of
th ea rrow asfarasitw illg o. #
Slide catch 2upwards in thed irection of the
ar row until it engages. #
Fold bac kthe wiper blade ont othe wiper arm. #
Remo vewiper blade 1from wiper arm. #
Inser tnew wa sher blade 1intheh older on
wiper arm 3.
When doing so, take intoa ccount thed iffe re nt
lengths of thew iper blades:
R Driver's side: long wiper blade
R Front-passenger side: shor twiper blade #
Slide catch 2down wardsu ntil it engages. #
Fold wiper arm 3bac kontot he windshield. Re
placing the windshiel dwiper blades (WET
WIPER SYSTEM) &
WARNING Risk of becoming trapped if
th ew indshield wiper sareswitched on
while wiper blades ar ebeing replaced
If th ew indshield wiper sbegin tomo vewhile
yo ua rechanging thew iper blades, youc an
be trapped bythew iper arm. #
Alwayss witc hoffthew indshield wipers
and thei gnition befor echanging the
wiper blades. 90
Light and vision

&
WARNING Risk of inju ryfrom using the
windshield wiper swhile thee ngine hood
is open
When thee ngine hood is open and thew ind‐
shield wiper saresetinm otion, youc an be
trapped bythew iper linkage. #
Alwayss witc hoffthew indshield wipers
and ignition befor eopening thee ngine
hood. %
If
th ew iper blades ar eworno ut, they will not
wipe thew indshield proper ly.R eplace the
wiper blades twic eayear,prefera blyin
spring and fall. #
Fold wiper arm 3away from thew indshield. #
Hold wiper arm 3and tur nthe wiper blade
aw ay from wiper arm 3inthed irection of
th ea rrow asfarasitw illg o. #
Slide catch 2upwards in thed irection of the
ar row until it engages. #
Remo vewiper blade 1from thew iper ar min
th ed irection of ar row4. #
Carefull yremo vehose 5from thew iper
blade. #
Attach hose 5tothen ew wiper blade. #
Inser tnew wa sher blade 1intheh older on
wiper arm 3.
When doing so, take intoa ccount thed iffe re nt
lengths of thew iper blades:
R Driver's side: long wiper blade
R front-passenger side: shor twiper blade #
Slide catch 2down wardsu ntil it engages. #
Fold bac kthe wiper blade ont othe wiper arm. #
Fold wiper arm 3bac kontot he windshield. Re
placing the rear windo wwiperblade #
Fold wiper arm 3away from ther ear win‐
do w. #
Press bo thretainin gclips 2inthed irection
of thea rrow and swivel thew iper blade away
from thew iper arm. #
Pull wiper blade 1upwards out of theh older
on wiper arm 3. #
Inser tnew wa sher blade 1intheh older on
wiper arm 3. #
Push ne wwiper blade 1ontow iper arm 3
until ther etainin gclips engage. #
Fold wiper arm 3bac kontot he rear win‐
do w. Mir
rors Operating
theo utside mir rors &
WARNING Risk of inju ryfrom adju sting
th ev ehicle settings while thev ehicle is in
motion
Yo uc oul dlose control of thev ehicle in the
fo llowing situations:
R ifyo ua djus tthe driver's seat, theh ead
re stra int ,the steering wheel or them irror
while thev ehicle is in motion
R ifyo uf asteny our seat belt whilet hevehi‐
cle is in motion #
Befor estarti ngthee ngine: adjus tthe
driver's seat, theh ead restra int ,the Light and vision
91

Instrument Displa
ywithc olor display
Tr ip computer (e xamp le)
1 Distance co vered( from start/ from reset)
2 Driving time (from start/from reset)
3 Averag espeed (from start/from reset)
4 Averag efuel consum ption (from start/from
re set) Instrument Displa
ywithb lacka nd whit edisplay
Tr ip computer (e xamp le)
1 Distance co vered( from start/from reset)
2 Driving time (from start/from reset)
3 Averag espeed (from start/from reset)
4 Averag efuel consum ption (from start/from
re set) Re
setting values on theo n-boa rdcompu ter
trip menu On-board computer:
4 Trip
% The spelling of
thed ispla yedm ain menu may
dif fer. Therefore, pa yattention tothem enu
ove rviewf orthei nstrument display
(/ page167).
Yo uc an rese tthe values of thef ollowing func‐
tions:
R Trip Odometer:
- Reset Trip Odometer?
R Trip computer:
- FromS tart -
FromR eset
R ECOd isplay #
Selec tthe function that is tobe rese ta nd
confir mthis selection. #
Confir mtheReset Values? promptwith Yes. Calling up navigation instructions on
theo n-
boar dcompu ter On-boar
dcomputer:
4 Navigation No
chang eofd irection announced (e xamp le)
1 Distance tothen extd estination
2 Estimated ar riva ltime
3 Distance tothen extc hang eofd irection
4 Name of cur rent road Chang
eofdirection announced (e xamp le)
1 Street intow hichthe chang eofd irection
leads
1 Destinatio nrout eoft hechang eofd irection
2 Distance tothec hang eofd irection
3 Chang eofdirection symbol
4 Recommended lane and then ew lane that
appear sduring thec hang eofd irection
(white)
5 Possible lane
6 Unrecommended lane (da rkgray) Instrument Displa
yand on-boar dcomputer 171

Profiles
stor ey our personal vehicle settings and
settings fort he multimedia sy stem.
If th ev ehicle is used byseverald rive rs,t he driver
can select their profile befor ethe journe y,with‐
out changing thes ettings of other drivers.
Yo uc an selec tthe profile:
R when entering (/ page192)
R ontheh ome screen (/ page188)
The profile settings ar eactivated as soon as a
profile is selected.
Profile content
The following settings can be sa vediny our pro‐
fi le, fore xamp le:
R Radio (including statio nlist)
R Lastdestinations
R Favo rite sa nd suggestions
Creating anew profile
Multimedia sy stem:
4 © 5
f Profiles #
Select 0081Create Profile . #
Select an avatar. #
Entert he name and confir mwith0076. #
Select Continue 0048. #
Tosave thec urrent settings in aprofile:
select Current Settings. #
Select Save.
or #
Toadop tfactor ysettings: select Savesave
directly.
% Fu
rther information on settingau ser profile
(/ page192). #
Activat eBluet oo th®
and select Connect
Phone,toc onnectamobile phone wi th the
user profile (/ page231).
Yo uc an also se tupauser profile without regis‐
te ring am obilephone. #
Select Finished.
The user profil eissaved.
Selecting profile options
Multimedia sy stem:
4 © 5
f Profiles #
Select 0062forap rofile. #
Toedit aprofile: select Edit Profile. #
Selec tana vatar. #
Chang ethe name, if necessar y. #
Select Save. #
Toconfigur esuggestions: selectSugges-
tio nS ettings (/page193). #
Torese tfavo rite s: select Reset Favorit eto
Factory Settings. #
Select Yes. #
Torese tap rofile: select Reset Profile to
Factory Settings. #
Select Yes. #
Todel eteap rofile: select Delete Profile . #
Select Yes.
% The gues
tprofile canno tbedeleted.
Selecting aprofile
Multimedia sy stem:
4 © 5
f Profiles #
Select aprofile. #
Press the0076 button toconfir mthe mes‐
sage.
The profile is loaded and activated.
% Alternatively
,the profile can already be selec‐
te dw hen thev ehicle is entered
(/ page192).
Showin gthe profile selection whe nentering
Requ irements:
R Atleas tone profile has been created.
Multimedia sy stem:
4 © 5
f Profiles #
Select General Settings. #
Activate ShowProfil eSelection Whe nGetting
In.
Whe nthe vehicle is star ted, them edia display
sho ws th eactiv eprofile. Suggestions
Suggestions
overview
The vehicle can lear nthe habits of thed rive r.
Based on theh abits that ha vebeen learned by
th es ystem, them ostlikely navigation destina‐
tions ,music tra cks, radio stations or con tacts are
of fere du nder SUGGESTIONS.
Suggestion sareshown when thef ollowing
re qu irements ar efulfilled:
R Aprofile has been created (/ page192). 19 2
MBUX multimedia sy stem